Microstructural characterization of as-cast biocompatible Co-Cr-Mo alloys

Materials Characterization

Volumn 62, Issue 1, 2011, Pages 53-61

  Giacchi, J V ^a,c   Morando, C N ^a,c   Fornaro, O ^a,c   Palacio, H A ^b,c  

^a Facultad de Ciencias Naturales e Instituto M Lillo   (Argentina)

^b Universidad Provincial del Sudoeste   (Argentina)

^c UNIVERSIDAD NACIONAL DEL CENTRO DE LA PROVINCIA DE BUENOS AIRES   (Argentina)

Author keywords

Biocompatible alloys; Carbides; Co Cr Mo; Microstructure; Solidification

Indexed keywords

AS CAST MICROSTRUCTURE; AS-CAST; BASE ALLOYS; BIOCOMPATIBLE ALLOYS; CO-CR-MO; COCRMO ALLOY; COMMERCIAL PURITY; COOLING RATES; ENERGY DISPERSIONS; HIGH STRENGTH; INDUSTRIAL ENVIRONMENTS; INTERDENDRITIC ZONES; MANUFACTURING PROCESS; MATRIX; MICRO-STRUCTURAL CHARACTERIZATION; ORTHOPEDIC IMPLANT; SECONDARY PHASE; SEM; STRENGTHENING MECHANISMS; WORK FOCUS;

BIOCOMPATIBILITY; CARBIDES; CERIUM ALLOYS; COBALT; CORROSION RESISTANCE; GRAIN BOUNDARIES; HIGH STRENGTH ALLOYS; INVESTMENT CASTING; INVESTMENTS; MANUFACTURE; MICROSTRUCTURE; MOLYBDENUM; OPTICAL MICROSCOPY; POWDER METALLURGY; PRECISION CASTING; SCANNING ELECTRON MICROSCOPY; SOLIDIFICATION;

MOLYBDENUM ALLOYS;

EID: 78751583945     PISSN: 10445803     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matchar.2010.10.011     Document Type: Article

References (29)

1. J. Escobedo, J. Méndez, D. Cortés, J. Gómez, M. Méndez, and H. Mancha Effect of nitrogen on the microstructure and mechanical properties of a CoCrMo alloy Mater Des 17 1996 79 83 (Pubitemid 126660916)
2. J. Campbell Castings: The new metallurgy of cast metals 2nd edition April 2003 Elsevier Science & Technology Oxford/GB
3. D.M. Stefanescu Science and engineering of casting solidification 2nd edition 2009 Springer US USA
4. V. Amigo Borrás, A. Paolini, J.F. Moreno Ballester, A. Vicente Escuder, and F. Romero Sanchis Estudio de la influencia de los tratamientos térmicos en la microdureza y microestructura de aleaciones CoCrMo Congreso Nacional de Propiedades Mecánicas de Sólidos, Gandia 2002 487 496
5. C. Montero Ocampo, M. Talavera, and H. Lopez Effect of alloy preheating on the mechanical properties of as-cast CoCrMoC alloys Metall Mater Trans A 30 1999 611 620
6. C.D. Opris, R. Liu, M.X. Yao, and X.J. Wu Development of Stellite alloy composites with sintering/HIPing technique for wear-resistant applications Mater Des 28 2007 581 591
7. L.E. Ramírez, M. Castro, M. Méndez, J. Lacaze, M. Herrrera, and G. Lesoult Precipitation path of secondary phases during solidification of the CoCrMoC alloy Scr Mater 47 2002 811 816
8. J.W. Weeton, and F.J. Clauss Effect of heat treatment upon microstructures microconstituents and hardness of a wrought cobalt-base alloy, Stellite 21 National Advisory Committee for Aeronautics, Technical Note 3107 March 1954
9. J.W. Weeton, and R.A. Signorelli Effect of heat treatment upon microstructures microconstituents and hardness of a wrought cobalt-base alloy Trans ASM 47 1955 815 845
10. R. Silverman, W. Arbiter, and F. Hodi Effect of sigma phase on Co-Cr-Mo base alloys Trans ASM 49 1957 805 822
11. C.T. Sims Contemporary view of cobalt-base alloys J Met 21 1969 27 42
12. H.S. Dobbs, and J.L.M. Robertson Heat treatment of cast Co-Cr-Mo for orthopaedic implant use J Mater Sci 18 1983 391 401
13. K. Asgar, and F.A. Peyton Effect of casting conditions on some mechanical properties of cobalt-case alloys J Dent Res 40 1961 73 86
14. K. Rajan, and J.B. Vander Sande Room temperature strengthening mechanisms in a Co-Cr-Mo-C alloy J Mater Sci 17 1982 769 778
15. C.T. Sims, W. Hagel, and N. Stoloff The Superalloys II: High temperature materials for aerospace and industrial power 2nd edition 1987 Wiley & Sons Inc. Chapter 5
16. C. Montero Ocampo, and A. Salinas Effect of carbon content on the resistance to localized corrosion of as-cast cobalt-based alloys in an aqueous chloride solution J Biomed Mater Res 29 1995 441 453
17. M. Herrera Trejo, A. Espinoza, J. Méndez, M. Castro, J. López, and J. Rendón Effect of C content on the mechanical properties of solution treated as-cast ASTM F75 alloys J Mater Sci Mater Med 16 2005 607 611
18. L.E. Ramírez Vidaurri, M. Castro Román, M. Herrera Trejo, C.V. García López, and E. Almanza Casas Cooling rate and carbon content effect on the fraction of secondary phases precipitate in as-cast microstructure of ASTM F75 alloy J Mater Process Technol 209 2009 1681 1687
19. T. Kilner, R.M. Pilliar, G.C. Weatherly, and C. Alibert Phase identification and incipient melting in a cast CoCr surgical implant alloy J Biomed Mater Res 16 1982 63 79
20. A.J. Clemow, and B.L. Daniell Solution treatment behavior of CoCrMo alloy J Biomed Mater Res 13 1979 265 279
21. 6 carbide dissolution mechanisms during heat treatment of ASTM F75 implant alloys Metall Mater Trans A 32A 2001 979 984
22. N.S. Vandamme, L. Que, and L.D.T. Topoleski Carbide surface coating of Co-Cr-Mo implant alloys by a microwave plasma-assisted reaction J Mater Sci 34 1999 3535-3521
23. A. Karaali, K. Mirouh, S. Hamamda, and P. Guiraldenq Microstructural study of tungsten influence on CoCr alloys Mater Sci Eng, A 390 2005 255 299
24. L. Zhuang, and E.W. Langer Effects of alloy additions on the fatigue properties of cast Co-Cr-Mo alloy used for surgical implants J Mater Sci 25 1990 683 689
25. V. Amigó, A. Vicente, F. Romero, and Y. Paolini Influencia del tratamiento HIP en la distribución de los carburos en prótesis CoCrMo Bol Soc Esp Ceram Vidrio 43 2004 573 577
26. A. Ges, O. Garbellini, O. Fornaro, and H. Palacio Solidificación controlada de aleaciones bicompatibles en prótesis de cadera Anales SAM/CONAMET-AAS 2001 2001 1189 1196
27. J. Szala, A. Szczotok, J. Richter, J. Cwajna, and A. Maciejny Selection of methods for etching carbides in MAR-M509 cobalt-base superalloy and acquisition of their images Mater Charact 56 2006 325 335
28. G. Vander Voort Metallography and microstructures ASM Handbook vol. 9 2004 Ohio
29. J.R. Lane, and N.J. Grant Carbide reactions in high temperature alloys Trans ASM 44 1952 p. 113, 62