The Importance of Normalization References in Interpreting Life Cycle Assessment Results

Journal of Industrial Ecology

Volumn 17, Issue 3, 2013, Pages 385-395

  Kim, Junbeum ^a   Yang, Yi ^a   Bae, Junghan ^a   Suh, Sangwon ^a  

^a NONE

Author keywords

Corn ethanol; Environmental impact; Impact category; Industrial ecology; Life cycle impact assessment (LCIA); Sustainability

Indexed keywords

DECISION SUPPORT SYSTEMS; ENVIRONMENTAL IMPACT; ETHANOL; EUTROPHICATION; REGIONAL PLANNING; SUSTAINABLE DEVELOPMENT; WASTE TREATMENT;

CORN-ETHANOL; ENVIRONMENTALLY PREFERABLE PURCHASING; IMPACT CATEGORY; INDUSTRIAL ECOLOGY; LIFE CYCLE ASSESSMENT (LCA); LIFE CYCLE IMPACT ASSESSMENT; RENEWABLE ENERGY TECHNOLOGIES; TOXIC RELEASE INVENTORIES;

LIFE CYCLE;

BIOFUEL; DECISION SUPPORT SYSTEM; EMISSION INVENTORY; ENVIRONMENTAL IMPACT ASSESSMENT; ETHANOL; EUTROPHICATION; INDUSTRIAL ECOLOGY; LIFE CYCLE ANALYSIS; MAIZE; MUNICIPAL SOLID WASTE; POLICY ANALYSIS; REGIONAL ECONOMY; SUSTAINABILITY; TOXIC SUBSTANCE; WASTE TREATMENT;

UNITED STATES;

ZEA MAYS;

EID: 84878912580     PISSN: 10881980     EISSN: 15309290     Source Type: Journal    
DOI: 10.1111/j.1530-9290.2012.00535.x     Document Type: Article

References (68)

1. ANL (Argonne National Laboratory). 2010. GREET (the greenhouse gases, regulated emissions, and energy use in transportation) model. http://greet.es.anl.gov/. Accessed October 2010.
2. Bare, J. C. 2011. Recommendation for land use impact assessment: First steps into framework, theory, and implementation. Clean Technology and Environmental Pollution 13(1): 7-18.
3. Bare, J. C., T. Gloria, and G. Norris . 2006. Development of the method and U.S. normalization database for life cycle impact assessment and sustainability metrics. Environmental Science and Technology 40(16): 5108-5115.
4. Bare, J. C., G. A. Norris, D. W. Pennington, and T. McKone . 2003. TRACI: The tool for the reduction and assessment of chemical and other environmental impacts. Journal of Industrial Ecology 6(3): 49-78.
5. Breedveld, L., M. Lafleur, and H. Blonk . 1999. A framework for actualising normalisation data in LCA: Experiences in the Netherlands. International Journal of Life Cycle Assessment 4(4): 213-220.
6. Cadotte, M., L. Deschênes, and R. Samson . 2007. Selection of a remediation scenario for a diesel-contaminated site using LCA. International Journal of Life Cycle Assessment 12(4): 239-251.
7. Cain, S. C. 2007. Sustainability for interior design: Rating the flooring materials in a Leed registered hotel using the BEES evaluative software for sustainable products. Master's thesis, University of Florida, Tallahassee, FL, USA.
8. Curran, M. A. 2006. Life cycle assessment: Principles and practice. EPA/600/R-06/060. Cincinnati, OH, USA: U.S. EPA. http://www.epa.gov/nrmrl/lcaccess/pdfs/600r06060.pdf. Accessed October 2010.
9. Duncan, M., B. C. Lippiatt, Z. Haq, M. Wang, and R. K. Conway . 2008. Metrics to support informed decision making for consumers of biobased products. Agriculture Information Bulletin 803. Washington, DC, USA: U.S. Department of Agriculture.
10. Ecoinvent Centre. 2010. Ecoinvent v2010. http://www.ecoinvent.org. Accessed October 2010.
11. EIA (Energy Information Administration). 2009. Annual energy outlook. http://www.eia.doe.gov/oiaf/aeo/index.html. 2009. Accessed November 2010.
12. EIP (Environmental Integrity Project). 2006. Who's counting? The systematic underreporting of toxic air emission. Washington, DC, USA: EIP.
13. Gloria, T. P., B. C. Lippiatt, and J. Cooper . 2007. Life cycle impact assessment weights to support environmentally preferable purchasing in the United States. Environmental Science and Technology 41(14): 7551-7557.
14. Guinée, J. 2001. Handbook on life cycle assessment operational guide to the ISO standards. International Journal of Life Cycle Assessment 7(5): 311-313.
15. Guinée, J. B., R. Heijungs, G. Huppes, A. Zamagni, P. Masoni, R. Buonamici, T. Ekvall, and T. Rydberg . 2011. Life cycle assessment: Past, present, and future. Environmental Science and Technology 45(1): 90-96.
16. Heijungs, R., M. Goedkoop, J. Struijs, S. Effting, M. Sevenster, and G. Huppes . 2003. Towards a life cycle impact assessment method which comprises category indicators at the midpoint and the endpoint level. Report of the first project phase: Design of the new method. VROM report. The Hague, the Netherlands: Netherlands Ministry of Housing, Spatial Planning and the Environment (VROM).
17. Heijungs, R., J. B. Guinée, R. Kleijn, and V. Rovers . 2007. Bias in normalization: Causes, consequences, detection and remedies. International Journal of Life Cycle Assessment 12(4): 211-216.
18. Hendrickson, C., A. Horvath, S. Joshi, and L. Lave . 1998. Economic input-output models for environmental life-cycle assessment. Environmental Science and Technology 32(7): 184A-194A.
19. Hischier, R. and B. Weidema . 2009. Implementation of life cycle impact assessment methods: Data v2.1. Ecoinvent report no. 3. St. Gallen, Switzerland: Ecoinvent Centre.
20. Huijbregts, M. A. J., L. Breedveld, G. Huppes, A. Koning, L. Oers, and S. Suh . 2001a. Normalization figures for environmental life cycle assessment-The Netherlands (1997/1998), Western Europe (1995) and the World (1990 and 1995). Journal of Cleaner Production 11(7): 737-748.
21. Huijbregts, M. A. J., G. Norris, R. Bretz, A. Ciroth, B. Maurice, B. Bahr, B. Weidema, and A. Beaufort . 2001b. Framework for modeling data uncertainty in life cycle inventories. International Journal of Life Cycle Assessment 6(3): 127-132.
22. Huppes, G. A., A. Koning, S. Suh, R. Heijungs, L. Oers, P. Nielsen, and J. B. Guinée . 2006. Environmental impacts of consumption in the European Union, high-resolution input-output tables with detailed environmental extensions. Journal of Industrial Ecology 10(3): 129-146.
23. ISO (International Organization for Standardization). 2006a. ISO 14040. Environmental management - Life cycle assessment - Principles and framework. Geneva, Switzerland: ISO.
24. ISO (International Organization for Standardization). 2006b. ISO 14044. Environmental management-Life cycle assessment-Requirements and guidelines. Geneva, Switzerland: ISO.
25. Jonas B., N. Howard, and B. Kneppers . 2010. Weighting of environmental impacts in Australia. Campbell, Australian Capital Territory, Australia: Building Products Innovation Council.
26. Khoo, H. 2009. Life cycle impact assessment of various waste conversion technologies. Waste Management 29(6): 1892-1900.
27. 2. International Journal of Greenhouse Gas Control 2(4): 448-467.
28. Lautier A., R. K. Rosenbaum, M. Margni, J. Bare, P. Roy, and L. Deschênes . 2010. Development of normalization factors for Canada and the United States and comparison with European factors. Science of the Total Environment 409(1): 33-42.
29. Leavitt, M., B. Grumbles, G. H. Grubbs, M. Smith, T. Wall, and J. Goodwin . 2004. Technical support document for the 2004 Effluent Guidelines Program plan. EPA-821-R-04-014. Washington, DC, USA: U.S. Environmental Protection Agency.
30. Lent, T. 2004. Toxic data bias and the challenges of using LCA in the design community. In: Sustainable Development and Society. Washington, D.C., USA: General Services Administration.
31. Lujan, B. 2009. Environmentally preferable purchasing policy. Denver, CO, USA: Department of Personnel and Administration State Purchasing Office.
32. Lundie, S., M. A. J. Huijbregts, H. V. Rowley, N. J. Mohr, and A. J. Feitz . 2007. Australian characterisation factors and normalisation figures for human toxicity and ecotoxicity. Journal of Cleaner Production 15(8-9): 819-832.
33. Miranda, M. L., M. H. Keating, and S. E. Edwards . 2008. Environmental justice implications of reduced reporting requirements of the Toxics Release Inventory burden reduction rule. Environmental Science and Technology 42(15): 5407-5414.
34. NASS (National Agricultural Statistics Service). 2008. Agricultural statistics 2008. http://www.nass.usda.gov/Publications/Ag_Statistics/2008/index.asp. Accessed January 2011.
35. NREL (National Renewable Energy Laboratory). 2004. U.S. Life Cycle Inventory Database. http://www.nrel.gov/lci/. Accessed January 2011.
36. Pehnt, M. 2006. Dynamic life cycle assessment (LCA) of renewable energy technologies. Renewable Energy 31(1): 55-71.
37. Pennington, D. W., J. Potting, G. Finnveden, E. Lindeijer, O. Jolliet, T. Rydberg, and G. Rebitzer . 2004. Life cycle assessment part 2: Current impact assessment practice. Environment International 30(5): 721-739.
38. Pfister, S., A. Koehler, and S. Hellweg . 2009. Assessing the environmental impacts of freshwater consumption in LCA. Environmental Science and Technology 43(11): 4098-4104.
39. Rogers, K. and T. P. Seager . 2009. Environmental decision-making using life cycle impact assessment and stochastic multiattribute decision analysis: A case study on alternative transportation fuels. Environmental Science and Technology 43(6): 1718-1723.
40. Sleeswijk, A. W., L. F. C. M. Oers, J. B. Guinée, J. Struijs, and M. A. J. Huijbregts . 2008. Normalisation in product life cycle assessment: An LCA of the global and European economic systems in the year 2000. Science of the Total Environment 390(1): 227-240.
41. Stranddorf, H. K., L. Hoffmann, and A. Schmidt . 2005a. Impact categories, normalisation and weighting in LCA. Updated on selected EDIP97 data. Environmental news no. 78. Danish Ministry of the Environment. Copenhagen, Denmark: Environmental Protection Agency. http://www2.mst.dk/udgiv/publications/2005/87-7614-574-3/pdf/87- 7614-575-1.pdf. Accessed January 2011.
42. Stranddorf, H. K., L. Hoffmann, and A. Schmidt . 2005b. Update on impact categories, normalisation and weighting in LCA. Selected EDIP97 data. Environmental project no. 995. Danish Ministry of the Environment. Copenhagen, Denmark: Environmental Protection Agency. http://www2.mst.dk/udgiv/Publications/2005/87-7614-570-0/pdf/87-7614-571-9.pdf. Accessed January 2011.
43. Strauss, K., A. Brent, and S. Hietkamp . 2006. Characterisation and normalisation factors for life cycle impact assessment mined abiotic resources categories in South Africa: The manufacturing of catalytic converter exhaust systems as a case study. International Journal of Life Cycle Assessment 11(3): 162-171.
44. Suh, S. 2005. Developing a sectoral environmental database for input-output analysis: The comprehensive environmental data archive of the US. Economic Systems Research 17(4): 449-469.
45. Suh, S., M. Lenzen, G. Treloar, H. Hondo, A. Horvath, G. Huppes, O. Jolliet, U. Klann, W. Krewitt, Y. Moriguchi, J. Munksgaard, and G. Norris . 2004. System boundary selection in life-cycle inventories using hybrid approaches. Environmental Science and Technology 38(3): 657-664.
46. Tugnoli, A., F. Santarelli, and V. Cozzani . 2008. An approach to quantitative sustainability assessment in the early stages of process design. Environmental Science and Technology 42(12): 4555-4562.
47. Tukker, A., G. Huppes, J. Guinee, R. Heijungs, A. Koning, L. V. Oers, S. Suh, T. Geerken, M. V. Holerbeke, B. Jansen, and P. Nielsen . 2006. Environmental impact of products (EIPRO) analysis of the life cycle environmental impacts related to the final consumption of the EU25. Report EUR 22284 EN. Seville, Spain: European Science and Technology Observatory.
48. Upshaw, T. A., W. J. Fisher, and E. J. Netemeyer . 2008. Natural oil polythiols and polyols-A life cycle comparison. Washington, DC: ACS Green Chemistry Institute.
49. U.S. Census Bureau. 2010. 2000 economic census report. http://www.census.gov. Accessed October 2010.
50. USDA (U.S. Department of Agriculture). 2000a. Manure nutrients relative to the capacity of cropland and pastureland to assimilate nutrients: Spatial and temporal trends for the United States. Table B-2 Manure nutrient production on livestock operations by state. Washington, DC, USA: USDA; B-4-B-5.
51. USDA (U.S. Department of Agriculture). 2000b. Environmental indicators of pesticide leaching and runoff from farm fields. http://www.nrcs.usda.gov/technical/nri/pubs/eip_pap.html. Accessed January 2011.
52. USDA (U.S. Department of Agriculture). 2010. Agriculture chemical use database. http://www.pestmanagement.info/nass/. Accessed October 2010.
53. USDA-NRCS. 2000. Agricultural waste management field handbook. National Engineering Handbook (NEH) part 651. http://policy.nrcs.usda.gov/viewerFS.aspx?hid=21430. Accessed January 2011.
54. USDA-NRCS (U.S. Department of Agriculture Natural Resources Conservation Service). 2006. Model simulation of soil loss, nutrient loss, and change in soil organic carbon associated with crop production. http://www.nrcs.usda.gov/technical/NRI/ceap/croplandreport/. Accessed January 2011.
55. U.S. EPA (U.S. Environmental Protection Agency). 1995. Emissions factors & AP 42: Compilation of air pollutant emission factors. Washington, DC, USA: U.S. EPA, chap. 9.
56. U.S. EPA (U.S. Environmental Protection Agency). 2004. Inventory of U.S. greenhouse gas emissions and sinks: 1990-2002. Washington, DC, USA: U.S. EPA, chap. 4, Tables 4-70.
57. U.S. EPA (U.S. Environmental Protection Agency). 2009a. Sustainable technology systems analysis, TRACI-Tool for Reduction and Assessment of Other Environmental Impacts. Cincinnati, OH, USA: U.S. EPA.
58. U.S. EPA (U.S. Environmental Protection Agency). 2009b. 2007 Toxic Release Inventory: Public data release. http://www.epa.gov/triexplorer/chemical.htm. Accessed May 2009.
59. U.S. EPA (U.S. Environmental Protection Agency). 2009c. 2008 National Emissions Inventory and data; 1970 - 2008 average annual emissions, all criteria pollutants. http://www.epa.gov/ttnchie1/trends/. Accessed May 2009.
60. U.S. EPA (U.S. Environmental Protection Agency). 2010a. EPA's final guidance on environmentally preferable purchasing. http://www.epa.gov/epp/pubs/guidance/finalguidance.htm. Accessed November 2010.
61. U.S. EPA (U.S. Environmental Protection Agency). 2010b. 2000 Toxic Release Inventory. http://www.epa.gov/tri/tridata/tri00/index.htm. Accessed January 2011.
62. VSI (Vinyl Siding Institute). 2009. Case study: Building green with insulated vinyl siding. Washington, DC, USA: VSI.
63. Wenting, S. 2009. Life cycle assessment of indoor recirculating shrimp aquaculture system. Master's thesis, University of Michigan, Ann Arbor, MI, USA.
64. Wenzel, H., M. Hauschild, and L. Alting . 1997. Environmental assessment of products. Methodology, tools and case studies in product development, Vol. 1. London, UK: Chapman & Hall, 517.
65. Wernet, G., S. Conradt, and H. P. Isenring . 2010. Life cycle assessment of fine chemical production: A case study of pharmaceutical synthesis. International Journal of Life Cycle Assessment 15(3): 294-303.
66. White, P. and M. Carty . 2010. Reducing bias through process inventory dataset normalization. International Journal of Life Cycle Assessment 15(9): 994-1013.
67. Zaman, A. U. 2010. Comparative study of municipal solid waste treatment technologies using life cycle assessment method. International Journal of Environmental Science and Technology 7(2): 225-234.
68. Zhou, X. and J. Schoenung . 2007. An integrated impact assessment and weighting methodology: Evaluation of the environmental consequences of computer display technology substitution. Journal of Environmental Management 83(1): 1-24.