Transparency Built-in: Energy Consumption and Cost Estimation for Additive Manufacturing Baumers et al. Energy and Cost Estimation for Additive Manufacturing

Journal of Industrial Ecology

Volumn 17, Issue 3, 2013, Pages 418-431

  Baumers, Martin ^a   Tuck, Chris ^a   Wildman, Ricky ^a   Ashcroft, Ian ^a   Rosamond, Emma ^a   Hague, Richard ^a  

^a NONE

Author keywords

Digital supply chain; Energy consumption; Industrial ecology; Manufacturing process; Rapid manufacturing; Rapid prototyping

Indexed keywords

COST ESTIMATING; EFFICIENCY; ENERGY UTILIZATION; LASER HEATING; RAPID PROTOTYPING; SUPPLY CHAINS; TRANSPARENCY;

DIGITAL SUPPLY CHAIN; DIRECT METAL LASER SINTERING; ENERGY CONSUMPTION AND COST; INDUSTRIAL ECOLOGY; MANUFACTURING OPERATIONS; MANUFACTURING PROCESS; RAPID MANUFACTURING; SUSTAINABLE MANUFACTURING;

MANUFACTURE;

COST-BENEFIT ANALYSIS; ENERGY FLOW; ENERGY USE; INDUSTRIAL ECOLOGY; MANUFACTURING; PRODUCTION COST; SUSTAINABILITY; TECHNOLOGY ADOPTION;

EID: 84878908172     PISSN: 10881980     EISSN: 15309290     Source Type: Journal    
DOI: 10.1111/j.1530-9290.2012.00512.x     Document Type: Article

References (55)

1. Alexander, P., S. Allen, and D. Dutta . 1998. Part orientation and build cost determination in layered manufacturing. Computer-Aided Design 30(5): 343-356.
2. ASTM. 2010. ASTM F2792 - 10e1 standard terminology for additive manufacturing technologies. http://www.astm.org/Standards/F2792.htm. Accessed 4 October 2010.
3. Baumers, M., C. Tuck, R. Hague, I. Ashcroft and R. Wildman . 2010. A comparative study of metallic additive manufacturing power consumption. Paper presented at the 2010 Solid Freeform Fabrication Symposium, 9-11 August, Austin, TX, USA.
4. Baumers, M., C. Tuck, and R. Hague . 2011. Realised levels of geometric complexity in additive manufacturing. International Journal of Product Development 13(3): 185-203.
5. Boothroyd, G., P. Dewhurst and W. Knight . 1994. Product design for manufacture and assembly. New York, NY, USA: Marcel Dekker.
6. British Standards Institution. 2011. Guide to PAS2050:2011. http://www.bsigroup.com/en/Standards-and-Publications/Industry-Sectors/Energy/PAS-2050. Accessed 15 May 2012.
7. Byun, H. and K. H. Lee . 2006. Determination of the optimal build direction for different rapid prototyping processes using multi-criterion decision making. Robotics and Computer-Integrated Manufacturing 22(1): 69-80.
8. Campbell, I., J. Combrinck, D. De Beer, and L. Barnard . 2008. Stereolithography build time estimation based on volumetric calculations. Rapid Prototyping Journal 14(5): 271-279.
9. Choi, S. H. and S. Samavedam . 2002. Modelling and optimisation of rapid prototyping. Computers in Industry 47(1): 39-53.
10. Cormier, D., H. West, O. Harryson, and K. Knowlson . 2004. Characterization of thin walled Ti-6Al-4V components produced via electron beam melting. Paper presented at the 2004 Solid Freeform Fabrication Symposium, 2-4 August, Austin, TX, USA.
11. DECC (Department of Energy and Climate Change). 2010. Quarterly energy prices, December 2010. http://www.decc.gov.uk/assets/decc/Statistics/publications/prices/1085-qepdec10.pdf. Accessed 10 May 2011.
12. Di Angelo, L. and P. Di Stefano . 2011. A neural network-based build time estimator for layer manufactured objects. International Journal of Advanced Manufacturing Technology 57(1): 215-224.
13. Dietmair, A. and A. Verl . 2009. Energy consumption forecasting and optimization for tool machines. MM Science Journal March: 62-66.
14. Else, P. and P. Curwen . 1990. Principles of microeconomics. London, UK: Unwin Hyman.
15. EOS GmbH. 2010. Products. http://www.eos.info/en/products.html. Accessed 24 September 2010.
16. Foran, B., M. Lenzen, C. Dey, and M. Bilek . 2005. Integrating sustainable chain management with triple bottom line accounting. Ecological Economics 52(2): 143-157.
17. Gößling-Reisemann, S. 2008. What is resource consumption and how can it be measured? Theoretical considerations. Journal of Industrial Ecology 12(1): 10-25.
18. Gutowski, T., J., Dahmus, and A. Thiriez . 2006. Electrical energy requirements for manufacturing processes. Paper presented at the 13th CIRP International Conference on Life Cycle Engineering, 31 May-2 June, Leuven, Belgium.
19. Hague, R., S. Mansour, and N. Saleh . 2004. Material and design considerations for rapid manufacturing. International Journal of Production Research 42(22): 4691-4708.
20. Herrmann, C. and S. Thiede . 2009. Process chain simulation to foster energy efficiency in manufacturing. CIRP Journal of Manufacturing Science and Technology 1(4): 221-229.
21. Herzog, T. 2009. World greenhouse gas emissions in 2005. http://pdf.wri.org/working_papers/world_greenhouse_gas_emissions_2005.pdf/. Accessed 15 July 2011.
22. Hollington, G. 2008. Design 2.0. http://www.tctmagazine.com/library/115/Design%202.0.pdf. Accessed 18 May 2011.
23. Hopkinson, N. and P. Dickens . 2003. Analysis of rapid manufacturing-Using layer manufacturing processes for production. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217(1): 31-39.
24. Hur, S., K. Choi, S. Lee, and P. Chang, 2001. Determination of fabricating orientation and packing in SLS process. Journal of Materials Processing Technology 112(1): 236-243.
25. Ikonen, I., W. E. Biles, A. Kumar, R. K. Ragade, and J. C. Wissel . 1997. A genetic algorithm for packing three-dimensional non-convex objects having cavities and holes. Proceedings of the 7th International Conference on Genetic Algorithms: Michigan State University, East Lansing, MI, July 19-23. Waltham, MA, USA: Morgan Kaufmann, 591-598.
26. Jeswiet, J. and S. Kara . 2008. Carbon emissions and CESTM in manufacturing. CIRP Annals-Manufacturing Technology 57(1): 17-20.
27. Jiménez-González, C. and M. Overcash . 2000. Energy sub-modules applied in life-cycle inventory of processes. Clean Products and Processes 2(1): 57-66.
28. Jovane, F., H. Yoshikawa, L. Alting, C. R. Boër, E. Westkämper, D. Williams, M. Tseng, G. Seliger, and A. M. Paci . 2008. The incoming global technological and industrial revolution towards competitive sustainable manufacturing. CIRP Annals-Manufacturing Technology 57(2): 641-659.
29. Kara, S. and W. Li . 2011. Unit process energy consumption models for material removal processes. CIRP Annals-Manufacturing Technology 60: 37-40.
30. Kellens, K., W. Dewulf, M. Overcash, M. Hauschild, and J. R. Duflou . 2012. Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI)-CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: Methodology description. International Journal of Life Cycle Assessment 17: 69-78.
31. Kellens, K., E. Yasa, W. Dewulf, and J. R. Duflou . 2010. Environmental assessment of selective laser melting and selective laser sintering. Paper presented at Going Green - CARE INNOVATION 2010: From Legal Compliance to Energy-efficient Products and Services, 8-11 November, Vienna, Austria.
32. Lovins, A. B. 1996. Negawatts-Twelve transitions, eight improvements and one distraction. Energy Policy 24(4): 331-343.
33. Mazzioli, A., M. Germani, and R. Raffaeli . 2009. Direct fabrication through electron beam melting technology of custom cranial implants designed in a PHANToM-based haptic environment. Materials and Design 30(8): 3186-3192.
34. Mognol, P., D. Lepicart, and N. Perry . 2006. Rapid prototyping: Energy and environment in the spotlight. Rapid Prototyping Journal 12(1): 26-34.
35. Morrow, W. R., H. Qi, I. Kim, J. Mazumder, and S. J. Skerlos . 2007. Environmental aspects of laser-based and conventional tool and die manufacturing. Journal of Cleaner Production 15(10): 932-943.
36. Morrow, W. R., H. Qi, I. Kim, J. Mazumder, and S. J. Skerlos . 2004. Laser-based and conventional tool and die manufacturing: Comparison of environmental aspects. Proceedings of the Global Conference on Sustainable Product Development and Life Cycle Engineering, 29 September-1 October, Berlin, Germany, 103-110.
37. Mumford, L. 1971. The myth of the machine-The Pentagon of power. London, UK: Secker & Warburg.
38. Munguia, F. J. 2009. RMADS: Development of a concurrent rapid manufacturing advice system. Ph.D. thesis, Universitat Politecnica de Catalunya, Barcelona, Spain.
39. Nyaluke, A., B. Nasser, H. R. Leep, and H. R. Parsaei . 1996. Rapid prototyping work space optimization. Computers & Industrial Engineering 31(1/2): 103-106.
40. Pham, D. T. and X. Wang . 2000. Prediction and reduction of build times for the selective laser sintering process. Proceedings of the Institution of Mechanical Engineers Part B 214: 425-430.
41. Rajemi, M. F., P. T. Mativenga, and A. Aramcharoen . 2010. Sustainable machining: Selection of optimum turning conditions based on minimum energy considerations. Journal of Cleaner Production 18(10-11): 1059-1065.
42. Ruffo, M. and R. Hague . 2007. Cost estimation for rapid manufacturing-Simultaneous production of mixed components using laser sintering. Proceedings of IMech E Part B: Journal of Engineering Manufacture 221(11): 1585-1591.
43. Ruffo, M., C. Tuck, and R. Hague . 2006a. Cost estimation for rapid manufacturing-Laser sintering production for low to medium volumes. Proceedings of IMech E Part B: Journal of Engineering Manufacture 220(9): 1417-1427.
44. Ruffo, M., C. Tuck, and R. Hague . 2006b. Empirical laser sintering time estimator for Duraform PA. International Journal of Production Research 44(23): 5131-5146.
45. Sarwar, M., M. Persson, H. Hellbergh, and J. Haider . 2009. Measurement of specific cutting energy for evaluating the efficiency of bandsawing different workpiece materials. International Journal of Machine Tools and Manufacture 49: 958-965.
46. Son, Y. K. 1991. A cost estimation model for advanced manufacturing systems. International Journal of Production Research 29(3): 441-452.
47. Strutt, P. R. 1980. A comparative study of electron beam and laser melting of M2 tool steel. Materials Science and Engineering 44(1): 239-250.
48. Taylor, P. 2008. Energy technology perspectives 2008-Scenarios and strategies to 2050. Paper presented at the Institute of Energy Economics Workshop, 7 July, Tokyo, Japan.
49. Telenko, C., C. C. Seepersad, and M. E. Webber . 2008. A compilation of design for environment principles and guidelines. Paper presented at the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 3-6 August, New York, NY, USA.
50. Tuck, C., R. Hague, and N. Burns . 2007. Rapid manufacturing: impact on supply chain methodologies and practise. International Journal of Services and Operations Management 3(1): 1-22.
51. Tuck, C., R. Hague, M. Ruffo, M. Ransley, and P. Adams . 2008. Rapid manufacturing facilitated customization. International Journal of Computer Integrated Manufacturing 21(3): 245-258.
52. Vijayaraghavan, A. and D. Dornfeld . 2010. Automated energy monitoring of machine tools. CIRP Annals-Manufacturing Technology 59(1): 21-24.
53. Westkämper, E., L. Alting, and G. Arndt . 2000. Life cycle management and assessment: Approaches and visions towards sustainable manufacturing (keynote paper). CIRP Annals-Manufacturing Technology 49(2): 501-526.
54. Wilson, J. O. 2006. Selection for rapid manufacturing under epistemic uncertainty. Master's thesis, Georgia Institute of Technology, Atlanta, GA, USA.
55. Wodziak, J. R., G. M. Fadel, and C. Kirschman . 1994. A genetic algorithm for optimizing multiple part placement to reduce build time. Proceedings of the 5th International Conference on Rapid Prototyping: 201-210. University of Dayton Research Institute, Dayton, OH.