Life Cycle Management and Assessment: Approaches and visions towards sustainable manufacturing

CIRP Annals - Manufacturing Technology

Volumn 49, Issue 2, 2000, Pages 501-526

  Westkamper, Engelbert ^a   Alting, Leo ^b   Arndt, Gunter ^c  

^a FRAUNHOFER INSTITUTE FOR MANUFACTURING ENGINEERING AND AUTOMATION IPA   (Germany)

^b Dept of Manufacturing Engineering ^*  (Denmark)

^c UNIVERSITY OF WOLLONGONG   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

COST EFFECTIVENESS; ECONOMIC AND SOCIAL EFFECTS; EFFICIENCY; LIFE CYCLE; PROCESS ENGINEERING; PRODUCT DESIGN; PRODUCT DEVELOPMENT; SUSTAINABLE DEVELOPMENT;

LIFE CYCLE ASSESSMENT; LIFE CYCLE COSTING; LIFE CYCLE MANAGEMENT (LCM);

PRODUCTION ENGINEERING;

EID: 0034512395     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0007-8506(07)63453-2     Document Type: Article

References (84)

1. Hawken, P.; Lovins, Amory B; Lovins, L. Hunter: Natural Capitalism Creating the Next Industrial Revolution, Little Brown and Company, 1999.
2. Meadows, D. and Meadows, D. (eds ), 1972. The Limits to Growth; A Report for the Club of Rome's Project on the Predicament of Mankind. Universe Publications.
3. Meadows et al.. Die neuen Grenzen des Wachstums (the new limits of growth) OVA, Stuttgart, 1992.
4. United Nation Framework Convention on Climate Change, 1999.
5. IPCC Second Assessment, Climate Change 1995: A Report of the Intergovernmental Panel on Climate Change.
6. United Nations Population Division. Department of Economic and Social Affairs (DESA): Briefing Packet: World Population Estimates and Projections, 1998 Revision, New York, 1998.
7. Alting, 1996, Institute of Manufacturing Engineering: Sustainable Industrial Production / Environmental Issues in Product Development - in Life Cycle Modelling for Innovative Products and Processes.
8. Alting, L. and Legarth J. B. (1995) Life cycle engineering and design, CIRP keynote paper, August 1995, Cirp Annals, vol. 44/2/95.
9. Alting, L., Jorgensen, J., 1993, "The Life Cycle Concept as a Basis for Sustainable Industrial Production", Annals of the CIRP, vol. 42, No. 1, pp. 163-167.
10. Seamann, R (1995) Environmental strategies, ethics and management. Swiss Academy of Engineering Sciences, CAETS-Convocation, Sweden 1995.
11. th Cirp General Assembly, Athens (Greece), 1998.
12. Friedel, A: Einfluss der Produktgestalt auf den Energieaufwand beim Recycling mechanischer Baugruppen und Bauteile (influence of the product design on the energy consumption of the recycling of mechanical subassemblies and parts). Springer Verlag, Berlin u.a., 1999.
13. Grote, A.: Grune Rechnung: Das Produkt Computer in der Ökobilanz (green bill: LCA of the product computer). In: c't (1994) Heft 12, 92-98.
14. Rydberg, T., Haussen, O., Ronning, A., Salmi, L., 1996, Sustainable product development - combining endusers quality, economy and ecology in the life cycle perspective in 3rd Int. CIRP Seminar on Life Cycle Engineering Eco-Performance '96, ETH Zürich, Switzerland.
15. Hunt, R.G., Franklin, W.E., Welch, R.O., Cross, J.A. and A.E. Woodall., 1974: Resource and environmental profile analysis of nine beverage container alternatives, United States Environmental Protection Agency (US EPA), Office of Solid Waste Management Programs, EPA/530/SW-91c), Washington D.C.
16. Bundesamt für Umweltschutz (BUS), 1984: Ökobilanzen von Packstoffen, Schriftenreihe Umweltschutz no. 24, Bern, Switzerland.
17. Lundholm, M.P. and G. Sundström, 1985: Resource and environmental impact of Tetra Brik carton and refillable and non-refillable glass bottles, Tetra Brik Aseptic environmental profile, AB Tetra Pak, Malmö, Sweden.
18. Franke, M. 1984: Umweltauswirkungen durch Getränkeverpackungen - Systematik zur Ermittlung der Umweltauswirkungen von komplexen Prozessen am Beispiel von Einweg-und Mehrweg-Getränkebehaltern, Technische Universität Berlin/Institut für Technischen Umweltschutz, Berlin
19. Ahbe, S., Braunschweig, A. and Müller-Venk, R., 1990: Methodik für Ökobilanzen auf der Basis ökologischer Optimierung, Schriftenreihe Umwelt Nr 133, Bundesamt für Umwelt, Wald und Landschaft (BUWAL), Bern, Switzerland.
20. Heijungs, R. (final edn.), 1992: Environmental life cycle assessment of products, volume 1 Guide, volume 2: Backgrounds. Center for Environmental Science (CML), University of Leiden, The Netherlands.
21. Lindfors., L.-G., Christiansen, K., Hoffman, L., Virtanen, Y., Juntilla, V., Hanssen, O.-J., Rønning, A., Ekvall, T. and Finnveden, G. (1995): Nordic guidelines on life cycle assessment. Nord 1995:20, Nordic Council of Ministers, Copenhagen.
22. Jolliet, O. and Crettaz, P. (1997) Critical surface-time 95. A life cycle impact assessment methodology including fate and exposure. École Polytechnique Fédérale de Lausanne, Switzerland.
23. Wenzel, H., Hauschild, M. and Alting, L., 1997: Environmental assessment of products. Volume 1: Methodology, tools and case studies in product development. Chapman and Hall, UK.
24. Pedersen, B. and Christiansen, K., 1992: A meta-review on product life cycle assessment. In Lindfors, L.G.(ed.). Product life cycle assessment - principles and methodology. Nord, 1992:9, Nordic Council of Ministers, Copenhagen.
25. Sustainability, 1993: The LCA Sourcebook. A European business guide to life-cycle assessment. Sustainability Ltd., Society for the Promotion of LCA Development (SPOLD) and Business in the Environment, U.K.
26. Fullana, P. and Puig, R., 1997: Análisis del ciclo de vida. Rubes Editorial S.L., Barcelona.
27. Harjula, T. Rapoza, B, Knight, W.A. and Boothroyd, G., 1996: Design for disassembly and the environment. CIRP Annals 45(1), 109-114.
28. Graedel, T.E. and Allenby, B.R., 1996: Design for Environment. Prentice Hall, New Jersey.
29. Jackson, P., Wallace, D. and Kegg, R., 1997: An analytical method for integrating environmental and traditional design considerations. CIRP Annals 46(1), 71-74.
30. Gu, P., Hashemian, M. and Sosale, S., 1997: An integrated modular design methodology for life-cycle engineering. CIRP Annals 46(1), 71-74.
31. Kondoh, S., Umeda, Y. and Yoshikawa, H., 1998: Development of upgradable cellular machines for environmentally conscious products. CIRP Annals 47(1), 381-394.
32. Hauschild, M., Alting, L, and Wenzel, H , 1999: Life cycle design - a route to the sustainable industrial culture? CIRP Annals 48(1), 393-396.
33. Alting, L.; M. Hausschild, H. Wenzel: Environmental Assessment of Products, Volume 1: Methodology, tools and case studies in product development, Chapman and Hall, London 1997.
34. Hauschild, M.Z. and Wenzel, H., 1998: Environmental assessment of products. Vol. 2 - Scientific background. Chapman and Hall, United Kingdom.
35. te Riele, H. and Zweers, A. (eds.), 1994: Ecodesign: Eight examples of environmental product design (in Dutch), TNO Produktcentrum and TU Delft, the Netherlands
36. Brezet, H , van der Horst, T , te Riele, H , Duijf, G . Haffmans, S., Bottcher, H , de Hoo, S , Zweers, A. and Verkooyen, H. 1994: Guideline for environmental product design, SDU Uitgeverij, 's-Gravenhave, The Netherlands (in Dutch, later revised and issued in English as: Brezet, H and van Hemel, C. (principal editors and authors), 1997, Ecodesign, a promising approach to sustainable production and consumption, UNEP, Paris).
37. Sheng, P , and Srinivasan, M., 1995: Hierarchical part planning strategy for environmentally conscious machining. CIRP Annals 46(1), 455-460.
38. Züst, R. and Caduff, G , 1997. Life-cycle modelling as an instrument for life-cycle engineering. CIRP Annals 46(1), 351-354.
39. Sheng, P., Bennet, D. and Thurwachter, S:, 1998: Environmental-based systems for planning of machining. CIRP Annals 47(1), 409-414.
40. Olesen, J., Wenzel, H., Hein, L. and Andreasen, M.M., 1996, Design for environment (in Danish), the Danish Ministry of the Environment and Energy and the Confederation of Danish Industries, Copenhagen.
41. Pedersen, M.A., 1998, EDIP PC-tool (beta version), Miljøbutikken, Copenhagen.
42. Hartmann, 1998: Hartmann's environmental report 1997, Part 1: Group environmental management and part 2: Environmental accounts, Lyngby, Denmark.
43. Novo Nordisk, 1998' Novo Nordisk Environment and Bioethics report, 1998 http://www.novo.dk/environm/ebr98/.
44. Rockwool International, 1997: Rockwool International Environmental report 1996 (in Danish), Hedehusene, Denmark.
45. ABB, 1996: ABB Environmental report 1998 -http://www abb.com/.
46. National Environmental Policy Plan, 1989' To choose or to lose. Ministry of Housing, Physical Planning and Environment, The Hague.
47. Danish Environmental Protection Agency, 1996: A strengthened product-oriented environmental effort (in Danish), Copenhagen.
48. Danish Environmental Protection Agency, 1998: Account of the Danish Environmental Protection Agency on the product-oriented environmental effort (in Danish), Copenhagen.
49. Scholl, G., 1996: Sustainable product policy in Europe, European Environment, 6: 183-193
50. European Commission, 1999: Workshop on integrated product policy. Final report, 8 December 1998. Directorate-General XI, Environment, Nuclear Safety and Civil Protection, Brussels.
51. th CIRP Int. Seminar on Life Cycle Engineering, Berlin, Germany, 26-27 June 1997.
52. Birkhofer, H.; H. Schott: Development of Environmentally Friendly Products - Methods, Material and Instruments, pp 432 - 443. In: Jansen, H., Krause, F.-L., 1995, Life-Cycle Modelling for innovative Products and Processes, Proceedings on life-cycle modelling for innovative products and processes, Berlin, Germany, November / December 1995, Chapman and Hall, 1995.
53. Krause, F.-L.; C. Kind Potentials of information technology for life-cycle-oriented product and process development, pp 14 - 27 In' Jansen, H., Krause, F -L , 1995, Life-Cycle Modelling for innovative Products and Processes, Proceedings on life-cycle modelling for innovative products and processes, Berlin, Germany, November/ December 1995, Chapman and Hall, 1995.
54. rd CIRP International Seminar on Manufacturing Systems, 5-7 June 2000, Stockholm, Sweden.
55. Anderl, R.; B. Daum, H. John: Weiterentwicklung des Produktdatenmanagements zum Management des Produktlebenszyklus, Darmstadt, 2000.
56. Eversheim, W.; W. Kölscheid: From Siultaneous Engineering to Product Life Cycle Design, Production Engineering Vol. V/2 (1998), pp 115-118.
57. Seliger, G.; H. Karl, H. Weber: Cooperative Design, Manufacturing and Assembly of Complex Products, Annals of the CIRP, Vol. 46/1/1997, pp 67-70.
58. Habersatter, K.; Widmer, F.: Ökobilanzen von Packstoffen - Stand 1990. In: Bundesamt für Umwelt , Wald und Landschaft (BUWAL) (Hrsg.): Schriftenreihe Umwelt Nr.133. Bem, Eigenverlag, 1991.
59. Steinhilper, R.: Remanufacturing - The Ultimate Form of Recycling. Stuttgart: Fraunhofer IRB 1998.
60. E. Westkämper, K. Feldmann, G. Reinhart, G. Seliger: Integrated Development of Assembly and Disassembly, CIRP Annals, Manufacturing Technology 48 (1999), 2, S.557-565.
61. Feldmann, K., Meedt, O., Trautner, S.: Demontage mit flexiblen Werkzeugen, maschinen anlagen verfahren mav, (7/8) 1998, P. 68-69.
62. Feldmann, K., Meedt, O., Trautner, S.: Innovative Disassembly Strategies Based on Flexible Partial Destrictive Tools, 1st IFAC Workshop on Intelligent Assembly (IDA' 98) Bled, Slowenien, 1998.
63. th International Seminar on Life Cycle Engineering, Queen's University, Kingston, CANADA, June 21/23 1999.
64. th International Seminar on Life Cycle Engineering, Queen's University, Kingston, CANADA, June 21/23 1999.
65. Seliger, G., Grudzien, W., Zaidi, H.: New Methods of Product Data Provision for a simplified Dissassembly. In. Proceedings of the Life Cycle Design 99, Kingston, Kanada, June 1999.
66. Seliger, G.; C. Hentschel, M. Wagner: Disassembly Factories for Recovery of Resources in Product and Material Cycles, pp 56 - 67. In: Jansen, H., Krause, F.-L., 1995, Life-Cycle Modelling for innovative Products and Processes, Proceedings on life-cycle modelling for innovative products and processes, Berlin, Germany, November / December 1995, Chapman and Hall, 1995.
67. Kuhnmann, Karl Qualitätssicherung. In: Brinkmann / Ehrenstreu / Steinhilper: Umwelt- und recyclinggerechte Produktentwicklung, Augsburg: WEKA- Verlag, 1994.
68. rd International Seminar on Life Cycle Engineering, ETH Zurich, Swizerland. Verlag Industrielle Orgnisation, Zürich, 1996
69. Carannate, T.; R. H. Haigh, D. S. Morris: Implementing Total Productive Maintenance - A comparative study of the UK and Japanese foundry industries, 1996.
70. Dowie, T., M. Simon, B. Fogg: Product disassembly costing in a life-cycle context, Proceedings of the International Conference on Clean Electronics Products and Technology (CONCEPT), IEE Conference Publication n 416 1995, IEE, Stevenage, 1995, S. 202 -207.
71. th CIRP Int. Seminar on Life Cycle Engineering, Berlin, Germany, 26-27 June 1997.
72. Yoshikawa, H. (1988) "The Factory of the Future: Social aspects" (Discussion), 38th CIRP General Assembly, Tokyo.
73. Arndt G. (1997) "Australias Participation in the Global Intelligent Manufacturing Systems IMS ResearchProgram2, Keynote Paper, Proc World Congress on Manufacturing Technology Towards 2000 incl. 7th IEAust ICME, Cairns. September pp. 11-20.
74. Arndt G. (1981) "Applied 'Acadustrialism' in Tertiary Engineering Courses", IEAust General Engineering Transactions, Vol. GES No. 2 pp. 66-97.
75. Arndt G., Furukawa Y., Jackson R. and Purchase, J. (1997) Final Report of Technical Themes working Group of IMS - ICE (International Committee of Experts), Toronto.
76. IEAust (1992) "Environmental Principles for Engineers" , Inst.of Engineers Aust Nat. Committee on Environmental Engineering, Canberra.
77. CFD/RMIT (1997) "Introduction to EcoRedesign", Centre for Design, RMIT University, Melbourne.
78. Arndt, G. (1998) "Manufacturing Education Based on Global Cooperative Research: IMS and the Future". Proc. SME International Conference on Education in Manufacturing, San Diego, October, pp. 199-204. Also SME Technical Paper No. ER98-313.
79. Brown, R.H. (1999) "Sustainable Manufacturing" Manufacturing World (IEAust-ManSA) May: 22.
80. Standards Australia (1999) "Environmental Standards Update" Issue 10, August.
81. Amdt, G (1999) "Possible Structure and Content of a Taxonomy for the Environmental Impact Assessment of IMS Projects" Internal Report to IMS-IRS, November.
82. Parker M, Arndt G, Fawcett A and Ogawa M (1999) "Environmentally Sustainable Development Workshop Report". IRS Report, Canberra, November.
83. Amdt G. (1992) "IMS and Appropriateness", Proc. 1st international Symposium on intelligent Manufacturing Systems, Tokyo, pp. 52-60.
84. Our common future (1987) Oxford University Press, (The Brundtland report).