Machinability study of stir cast hypoeutectic aluminum-silicon alloys during turning

Journal of Materials Engineering and Performance

Volumn 22, Issue 2, 2013, Pages 470-482

  Sood, P K ^a   Sehgal, Rakesh ^a   Dwivedi, D K ^b  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

Author keywords

analysis of variance; coated tools; cutting parameters; semi solid metal processing; Taguchi method

Indexed keywords

ANALYSIS OF VARIANCE (ANOVA); BILLETS (METAL BARS); CADMIUM; CARBIDES; CUTTING TOOLS; MACHINABILITY; MELTING FURNACES; METAL CUTTING; SIGNAL TO NOISE RATIO; SILICON ALLOYS; TAGUCHI METHODS; TURNING;

COATED CARBIDE INSERT; COATED TOOLS; CUTTING PARAMETERS; HYPOEUTECTIC AL-SI ALLOY; HYPOEUTECTIC ALUMINUM-SILICON ALLOY; MACHINING CHARACTERISTICS; MACHINING PERFORMANCE; SEMI-SOLID METAL PROCESSING;

ALUMINUM ALLOYS;

EID: 84878533826     PISSN: 10599495     EISSN: 15441024     Source Type: Journal    
DOI: 10.1007/s11665-012-0287-z     Document Type: Article

References (35)

1. B.S. Reddy, G. Padmanabhan, and V.K. Reddy, Surface Roughness Prediction Techniques for CNC Turning, Asian J. Sci. Res., 2008, 1(3), p 256-264
2. M.C. Chen and H.Y. Tseng, Machining Parameters Selection for Stock Removal Turning in Process Plans Using a Float Encoding Genetic Algorithm, J. Chin. Inst. Eng., 1998, 21(4), p 493-506
3. D.K. Dwivedi, A. Sharma, and T.V. Rajan, Machining of LM13 and LM28 Cast Aluminum Alloys Part-I, J. Mater. Proc. Technol., 2008, 196(1-3), p 197-204
4. E.M. Trent and P.K. Wright, Forces, Stresses and Heat in Metal Cutting, Metal Cutting, 4th ed., Butterworth-Heinemann, Woburn, 2000, p 57-97
5. V.S. Sharma, S. Dhiman, R. Sehgal, and S. Kumar, Assessment and Optimization of Cutting Parameters While Turning AlSI, 52100 Steel, Int. J. Precis. Eng. Manuf., 2008, 9(2), p 54-62
6. M. Dash and M. Makhlouf, Effect of Key Alloying Elements on the Feeding Characteristics of Aluminum-Silicon Casting Alloys, J. Light Met., 2001, 1(4), p 251-265
7. P.K. Sood, R. Sehgal, and D.K. Dwivedi, Study on Chip Formation in Machining (Al-Si-1.2Fe) Hypereutectic Aluminium Alloy, Proc. of the National Conf. on Design and Manufacturing Issues in Automotive and Allied Industries, July 10-11, 2009 (Chennai, India), IIT Madras, 2009, p 16-22
8. Y. Wang and Y. Xiong, Effects of Beryllium in Al-Si-Mg-Ti Cast Alloy, J. Mater. Sci. Eng. A, 2000, 280(1), p 124-127
9. L.N. Lopez de Lacalle, C. Angulo, A. Lamikiz, and J.A. Sanchez, Experimental and Numerical Investigation of the Effect of Spray Cutting Fluids in High Speed Milling, J. Mater. Process. Technol., 2006, 172, p 11-15
10. F. Klocke and G. Eisenblatter, Machinability Investigation of the Drilling Process Using Minimal Cooling Lubrication Techniques, Prod. Eng., 1997, 4(1), p 19-24
11. J.F. Kelly and M.G. Cotterell, Minimal Lubrication Machining of Aluminium Alloys, J. Mater. Process. Technol., 2002, 120, p 327-334
12. D.U. Braga, A.E. Diniz, G.W.A. Miranda, and N.L. Coppini, Using a Minimum Quantity of Lubricant (MQL) and a Diamond Coated Tool in the Drilling of Aluminium-Silicon Alloys, J. Mater. Process. Technol., 2002, 122, p 127-138
13. N. Crauwels, K. De Bruyn, P. Perremans, M. Van Stappen, J.P. Celis, and L. Stals, Ecological Cutting: Dry, Minimal Quantity Lubrication or Ecological Cutting Fluids? Proceedings of the International Symposium Improving Machine Tool Performance, Michelena, San Sebastian, 2, 1998, p 703-714
14. M. Hiroki and I. Ichiro, Cutting with Minimal Quantity Lubricant, Proceedings of the International Symposium Improving Machine Tool Performance, Michelena, San Sebastían, 2, 1998, p 655-665
15. L.N. López de Lacalle, A. Lamikiz, J. Fernández de Larrinoa, and I. Azkona, Advanced Cutting Tools, Machining of Hard Materials, J. Paulo Davim, Ed., Springer, London, 2011, p 56-57
16. L.N. López de Lacalle, A. Lamikiz, M. Fernandes, A. Gutiérrez, and J. Sánchez, Turning of Thick Thermal Spray Coatings, J. Thermal Spray Technol., 2004, 10(2), p 249-254
17. L.N. López de Lacalle, A. Lamikiz, J. Muñoa, M.A. Salgado, and J.A. Sánchez, Improving the High-Speed Finishing of Forming Tools for Advanced High-Strength Steels (AHSS), Int. J. Adv. Manuf. Technol., 2006, 29, p 1-2
18. L.N. Lopez de Lacalle, A. Celaya, A. Lamikiz, and U. Bravo, Effect of Coatings and Tool Geometry on the Dry Milling of Wrought Aluminum Alloys, Int. J. Mater. Prod. Technol., 2008, 32(1), p 41-55
19. J. Paulo Davim, Machining of Hard Materials, Springer, New York, 2011
20. B. Sahoo, A.K. Chattopadhyay, and A.B. Chattopadhyay, Development of Diamond Coated Tool and its Performance in Machining Al-11%Si Alloy, Bull. Mater. Sci., 2002, 25(6), p 487-491
21. H.A. Kishawy, M. Dumitrescu, E.G. Ng, and M.A. Elbestawi, Effect of Coolant Strategy on Tool Performance, Chip Morphology and Surface Quality During High-Speed Machining of A 356 Aluminum Alloy, Inter. J. Mach. Tools Manuf., 2005, 45(2), p 219-227
22. H. Yoshimura, T. Moriwaki, N. Ohmae, T. Nakai, T. Shibasaka, H. Kinoshita, M. Matsui, and M. Shimizu, Study on Near Dry Machining of Aluminum Alloys, JSME Int. J. C, 2006, 49(1), p 83-89
23. N. Fang and Q. Wu, The Effects of Chamfered and Honed Tool Edge Geometry in Machining of Three Aluminum Alloys, Int. J. Mach. Tools Manuf., 2005, 45(10), p 1178-1187
24. J.M. Dasch, C.C. Ang, C.A. Wong, R.A. Waldo, D. Chester, Y.T. Cheng, B.R. Powell, A.M. Weiner, and E. Konca, The Effect of Free-Machining Elements on Dry Machining of B319 Aluminum Alloy, J. Mater. Process. Technol., 2009, 209(10), p 4638-4644
25. P. Roy, S.K. Sarangi, A. Ghosh, and A.K. Chattopadhayay, Machining Study of Pure Aluminum and Al-12%Si Alloys Against Coated and Uncoated Carbide Inserts, Int. J. Refract. Met. Hard Mater., 2009, 27(3), p 535-544
26. A. Aggarwal and H. Singh, Optimization of Machining Techniques A Retrospectives and Literature Review, Sadhana, 2005, 30(6), p 699-771
27. W.H. Yang and Y.S. Tarng, Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method, J. Mater. Process. Technol., 1998, 84(1-3), p 122-129
28. E.D. Kirby, A Parameter Design Study in a Turning Operation Using the Taguchi Method, The Tech. Interface, Fall, 2006, p 1-14
29. S.S. Mahapatra, A. Patnaik, and P.K. Patnaik, Parametric Analysis and Optimization of Cutting Parameters for Turning Operations based on Taguchi Method, Proc. of Int. Conf. on Global Manufacturing and Innovation, July 27-29 (NIT, Rourkela, Orissa, India), 2006, p 1-8
30. A.I. Gusri, C. Hassan., A.G. Jaharah, B. Yanuar, A. Yasir, and A. Nagi, Application of Taguchi Method in Optimizing Turning Parameters of Titanium Alloy, Seminar on Engineering Mathematics, A. Zaharim et al., Ed., 2008, p 57-63
31. E.D. Kirby, Z. Zhang, J.C. Chen, and J. Chen, Optimizing Surface Finish in a Turning Operation Using the Taguchi Parameter Design Method, Int. J. Adv. Manuf. Technol., 2006, 30, p 1021-1029
32. V.N. Gaitonde, S.R. Karnik, and J.P. Davim, Multiperformance Optimization in Turning of Free-Machining Steel Using Taguchi Method and Utility Concept, J. Mater. Eng. Perform., 2009, 18, p 231-236
33. A. Aggarwal, H. Singh, P. Kumar, and M. Singh, Optimizing Power Consumption for CNC Turned Parts Using Response Surface Methodology and Taguchi's Technique - A Comparative Analysis, J. Mater. Process. Technol., 2008, 200(1-3), p 373-384
34. N. Fat-Halla, P. Secordel, and M. Suery, Microstructure and Mechanical Properties of Modified and Non-Modified Stir-Cast Al-Si Hypoeutectic Alloys, J. Mater. Sci., 1988, 23(7), p 2419-2423
35. Haizhi Ye, An Overview of the Development of Al-Si-Alloy Based Material for Engine Applications, J. Mater. Eng. Perform., 2003, 12(3), p 288-297