메뉴 건너뛰기




Volumn 12, Issue 3, 2003, Pages 288-297

An overview of the development of Al-Si-alloy based material for engine applications

Author keywords

Al Si alloy; Materials fatigue; Wear behavior

Indexed keywords

ALLOYING; CASTING; ENGINES; FATIGUE OF MATERIALS; INTERMETALLICS; MICROSTRUCTURE; SILICON ALLOYS; WEAR RESISTANCE;

EID: 0038818492     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1361/105994903770343132     Document Type: Review
Times cited : (514)

References (50)
  • 1
    • 33751380625 scopus 로고
    • ASM: "properties and selection - Nonferrous alloys and special-purpose materials"
    • ASM International. Materials Park, OH
    • ASM: "Properties and Selection: Nonferrous Alloys and Special-Purpose Materials," ASM Handbook, Vol. 2, ASM International. Materials Park, OH, 1990.
    • (1990) ASM Handbook , vol.2
  • 6
    • 0030086392 scopus 로고    scopus 로고
    • Porosity formation in Al-9wt%Si-3wt%Cu alloy systems: Metallurgraphic observations
    • N. Roy, A.M. Samuel, and F.H. Samuel: "Porosity Formation in Al-9wt%Si-3wt%Cu Alloy Systems: Metallurgraphic Observations," Metall. Mater. Trans. A., 1996, 27A, pp. 415-29.
    • (1996) Metall. Mater. Trans. A. , vol.27 A , pp. 415-429
    • Roy, N.1    Samuel, A.M.2    Samuel, F.H.3
  • 7
    • 0033524578 scopus 로고    scopus 로고
    • Effect of Cu content on the level of microporosity in Al-Si-Cu-Mg casting alloys
    • C.H. Caceres, M.B. Djurdjevic, T.J. Stockwell, and J.H. Sokolowski: "Effect of Cu Content on the Level of Microporosity in Al-Si-Cu-Mg Casting Alloys," Scripta Mater., 1999, 40(5), pp. 631-37.
    • (1999) Scripta Mater. , vol.40 , Issue.5 , pp. 631-637
    • Caceres, C.H.1    Djurdjevic, M.B.2    Stockwell, T.J.3    Sokolowski, J.H.4
  • 8
    • 0031271197 scopus 로고    scopus 로고
    • Relationship between microstructural extremum and fracture path in a cast Al-Si-Mg alloy
    • M.D. Dighe and A.M. Gokhale: "Relationship Between Microstructural Extremum and Fracture Path in a Cast Al-Si-Mg Alloy," Scripta Metal., 1997, 57(9), pp. 1435-40.
    • (1997) Scripta Metal. , vol.57 , Issue.9 , pp. 1435-1440
    • Dighe, M.D.1    Gokhale, A.M.2
  • 9
    • 0029293169 scopus 로고
    • Effects of solidification structure on fatigue crack growth in AC4CH cast aluminum alloys
    • S. Kumai, J.Q. Hu, Y. Higo, and S. Nunomura: "Effects of Solidification Structure on Fatigue Crack Growth in AC4CH Cast Aluminum Alloys," J. Jap. Instit. Light Metals (Jap.), 1995, 45(4), pp. 198-203.
    • (1995) J. Jap. Instit. Light Metals (Jap.) , vol.45 , Issue.4 , pp. 198-203
    • Kumai, S.1    Hu, J.Q.2    Higo, Y.3    Nunomura, S.4
  • 11
    • 0028381863 scopus 로고
    • Wear characteristics of Al-Si alloys
    • H. Torabian, J.P. Pathak, and S.N. Tiwari: "Wear Characteristics of Al-Si Alloys," Wear, 1994, 172, pp. 49-58.
    • (1994) Wear , vol.172 , pp. 49-58
    • Torabian, H.1    Pathak, J.P.2    Tiwari, S.N.3
  • 12
    • 0033939756 scopus 로고    scopus 로고
    • The effect of microscopic inclusion location and silicon segregation on fatigue lifetimes of aluminum alloy A356 castings
    • E. Mark, J.G. Conley, and M.E. Fine: "The Effect of Microscopic Inclusion Location and Silicon Segregation on Fatigue Lifetimes of Aluminum Alloy A356 Castings," Mater. Sci. Eng., 2000, A285, pp. 43-48.
    • (2000) Mater. Sci. Eng. , vol.A285 , pp. 43-48
    • Mark, E.1    Conley, J.G.2    Fine, M.E.3
  • 13
    • 0032633535 scopus 로고    scopus 로고
    • Fatigue performance of a cast aluminum alloy Al-7Si-Mg with surface defects
    • H. Jiang, P. Bowen, and J.F. Knott: "Fatigue Performance of a Cast Aluminum Alloy Al-7Si-Mg With Surface Defects," J. Mater. Sci., 1999, 34. pp. 719-25.
    • (1999) J. Mater. Sci. , vol.34 , pp. 719-725
    • Jiang, H.1    Bowen, P.2    Knott, J.F.3
  • 15
    • 0037942386 scopus 로고
    • Institute of Metals and Materials Australasia, the Materials Society of the IEAust (Australia)
    • J. Barresi, W. Thompson, C.J. Heathcock, and B.J. Costello: Machining of Al-Si-Alloys, Institute of Metals and Materials Australasia, the Materials Society of the IEAust (Australia), pp. 1-12, 1992.
    • (1992) Machining of Al-Si-Alloys , pp. 1-12
    • Barresi, J.1    Thompson, W.2    Heathcock, C.J.3    Costello, B.J.4
  • 16
    • 0022722382 scopus 로고
    • Anon: "Developments in light metals"
    • Anon: "Developments in Light Metals," Met. Prog., 1986, 129(6), pp. 35-36, 38, 43-44.
    • (1986) Met. Prog. , vol.129 , Issue.6 , pp. 35-36
  • 17
    • 26544431729 scopus 로고
    • Microstructural control of high strength wear resistant aluminum foundry alloys
    • D.E. Kelly and D.M. Smith: "Microstructural Control of High Strength Wear Resistant Aluminum Foundry Alloys," Australasian Instit. Met., 14-16, 1985.
    • (1985) Australasian Instit. Met.
    • Kelly, D.E.1    Smith, D.M.2
  • 18
    • 0034096520 scopus 로고    scopus 로고
    • High cycle fatigue of squeeze cast Al/SiCw composites
    • S.B. Kim, D.A. Koss, and D.A. Gerard: "High Cycle Fatigue of Squeeze Cast Al/SiCw Composites," Mater. Sci. Eng., 2000, A277, pp. 123-33.
    • (2000) Mater. Sci. Eng. , vol.A277 , pp. 123-133
    • Kim, S.B.1    Koss, D.A.2    Gerard, D.A.3
  • 19
    • 0001177521 scopus 로고    scopus 로고
    • Macrostructure and mechanical properties of a high volume fraction SiC particle reinforced AlCu4MgAg squeeze casting
    • S. Long, O. Beffort, C. Cayron, and C. Bonjour: "Macrostructure and Mechanical Properties of a High Volume Fraction SiC Particle Reinforced AlCu4MgAg Squeeze Casting," Mater. Sci. Eng., 1999, A259, pp. 175-85.
    • (1999) Mater. Sci. Eng. , vol.A259 , pp. 175-185
    • Long, S.1    Beffort, O.2    Cayron, C.3    Bonjour, C.4
  • 20
    • 0031380407 scopus 로고    scopus 로고
    • Wear behavior of an Al-12%Si alloy reinforced with a low volume fraction of SiC particles
    • S.C. Tjong, S.Q. Wu, and H.C. Liao: "Wear Behavior of an Al-12%Si Alloy Reinforced With a Low Volume Fraction of SiC Particles," Compos. Sci. Technol, 1997, 57, pp. 1551-58.
    • (1997) Compos. Sci. Technol , vol.57 , pp. 1551-1558
    • Tjong, S.C.1    Wu, S.Q.2    Liao, H.C.3
  • 21
    • 0028476328 scopus 로고
    • Density, ultimate tensile strength and microstructure of a squeeze cast Al-11.8Si-3Mg-5Graphite composite
    • P. Balan, R.M. Pillai, K.G. Satyanrayana, and B.C. Pai: "Density, Ultimate Tensile Strength and Microstructure of a Squeeze Cast Al-11.8Si-3Mg-5Graphite Composite," Can. Metall. Q., 1994, 33(3), pp. 255-58.
    • (1994) Can. Metall. Q. , vol.33 , Issue.3 , pp. 255-258
    • Balan, P.1    Pillai, R.M.2    Satyanrayana, K.G.3    Pai, B.C.4
  • 22
    • 0028477528 scopus 로고
    • Casting of graphitic Al-Si base composites
    • S.F. Moustafa: "Casting of Graphitic Al-Si Base Composites," Can. Metall. Q., 1994, 33(3), pp. 259-64.
    • (1994) Can. Metall. Q. , vol.33 , Issue.3 , pp. 259-264
    • Moustafa, S.F.1
  • 23
    • 0018946276 scopus 로고
    • Performance of an Al/Si/Graphite particle composite piston in a diesel engine (retroactive coverage)
    • B.P. Krishnan, N. Raman, K. Narayanaswamy, and P.K. Rohatgi: "Performance of an Al/Si/Graphite Particle Composite Piston in a Diesel Engine (Retroactive Coverage)," Wear, 1980, 60(1), pp. 20515.
    • (1980) Wear , vol.60 , Issue.1 , pp. 205-215
    • Krishnan, B.P.1    Raman, N.2    Narayanaswamy, K.3    Rohatgi, P.K.4
  • 24
    • 51649134172 scopus 로고
    • The effect of paniculate reinforcement on the sliding wear behavior of aluminum matrix composites
    • M. Roy, B. Venkataraman, V.V. Bhanuprasad, Y.R. Mahajan, and G. Sundararajan: "The Effect of Paniculate Reinforcement on the Sliding Wear Behavior of Aluminum Matrix Composites," Metall. Trans. A (USA), 1992, 23A(10), pp. 2833-47.
    • (1992) Metall. Trans. A (USA) , vol.23 A , Issue.10 , pp. 2833-2847
    • Roy, M.1    Venkataraman, B.2    Bhanuprasad, V.V.3    Mahajan, Y.R.4    Sundararajan, G.5
  • 25
    • 0042936267 scopus 로고
    • Tribological application of MMC for reducing engine weight
    • K. Shibata and H. Ushio: "Tribological Application of MMC for Reducing Engine Weight," Tribal. Int., 1994, 27, pp. 39-44.
    • (1994) Tribal. Int. , vol.27 , pp. 39-44
    • Shibata, K.1    Ushio, H.2
  • 27
    • 0037942382 scopus 로고    scopus 로고
    • Features of melting of aluminum alloys in plasma arc direct current furnaces
    • M.A. Meshkov: "Features of Melting of Aluminum Alloys in Plasma Arc Direct Current Furnaces." Tsvetnye Metally (Russia), 2000. 8, pp. 130-31.
    • (2000) Tsvetnye Metally (Russia) , vol.8 , pp. 130-131
    • Meshkov, M.A.1
  • 29
    • 0037942381 scopus 로고    scopus 로고
    • Optimum time for pouring aluminum melt after being refined
    • Z. Zhang and X. Bian: "Optimum Time for Pouring Aluminum Melt After Being Refined," Foundry (China), 1999, 11, pp. 1-3, 7.
    • (1999) Foundry (China) , vol.11 , pp. 1-3
    • Zhang, Z.1    Bian, X.2
  • 32
    • 0033749907 scopus 로고    scopus 로고
    • Modification effect and mechanism of Sr, Na in Al-Si alloy
    • P. Li, D. Zeng, J. Jia, and Q. Li: "Modification Effect and Mechanism of Sr, Na in Al-Si Alloy," Chinese J. Mech. Eng. (China), 2000, 36(2), pp. 81-84.
    • (2000) Chinese J. Mech. Eng. (China) , vol.36 , Issue.2 , pp. 81-84
    • Li, P.1    Zeng, D.2    Jia, J.3    Li, Q.4
  • 33
    • 1642618028 scopus 로고    scopus 로고
    • Heredity of hydrogen in Al alloys during melting process
    • Z. Zhang, X. Bian, and X. Liu: "Heredity of Hydrogen in Al Alloys During Melting Process," Mater. Sci. Forum (Switzerland), 2000, 331-337(1), pp. 307-12.
    • (2000) Mater. Sci. Forum (Switzerland) , vol.331-337 , Issue.1 , pp. 307-312
    • Zhang, Z.1    Bian, X.2    Liu, X.3
  • 34
    • 0037604352 scopus 로고    scopus 로고
    • Development of degassing technology of aluminum alloys at kamensk-ural'skii metallurgical works
    • A.I. Semenukhin and B.V. Ovsyannikov: "Development of Degassing Technology of Aluminum Alloys at Kamensk-Ural'skii Metallurgical Works," Tekhnol. Legkikh Splavov, 1999, 5, pp. 8-10.
    • (1999) Tekhnol. Legkikh Splavov , vol.5 , pp. 8-10
    • Semenukhin, A.I.1    Ovsyannikov, B.V.2
  • 35
    • 0031207374 scopus 로고    scopus 로고
    • Degassing aluminum using static fine-pore refractory diffusers
    • D.A. Larsen: "Degassing Aluminum Using Static Fine-Pore Refractory Diffusers," JOM (USA), 1997, 49(8), pp. 27-28, 67.
    • (1997) JOM (USA) , vol.49 , Issue.8 , pp. 27-28
    • Larsen, D.A.1
  • 36
    • 33750930241 scopus 로고    scopus 로고
    • Dissolution kinetics of primary silicon for hypereutectic Al-Si alloy
    • R. Zhang, Q.F. Cao, S.X. Pang, and L. Liu: "Dissolution Kinetics of Primary Silicon for Hypereutectic Al-Si Alloy," Chinese J. Nonferrous Metals (China), 2000. 70(1), pp. 89-91.
    • (2000) Chinese J. Nonferrous Metals (China) , vol.70 , Issue.1 , pp. 89-91
    • Zhang, R.1    Cao, Q.F.2    Pang, S.X.3    Liu, L.4
  • 40
    • 0001852824 scopus 로고    scopus 로고
    • Characterization and shear behavior of semi-solid Al-7Si-0.35Mg alloy microstructure
    • H. Wang: "Characterization and Shear Behavior of Semi-Solid Al-7Si-0.35Mg Alloy Microstructure," Aluminum Trans., 2000, 2(1), pp. 57-66.
    • (2000) Aluminum Trans. , vol.2 , Issue.1 , pp. 57-66
    • Wang, H.1
  • 41
    • 0022806096 scopus 로고
    • Castings-current practice and future potential
    • G.A. Chadwick: "Castings-Current Practice and Future Potential," Met. Mater., 1986, 2, pp. 693-98.
    • (1986) Met. Mater. , vol.2 , pp. 693-698
    • Chadwick, G.A.1
  • 42
    • 0027841730 scopus 로고
    • Inhibition of delayed ageing by trace additions in Al-7Si-0.3Mg cast alloy
    • S. Murali, K.T. Kashyap, K.S. Raman, and K.S.S. Murthy: "Inhibition of Delayed Ageing by Trace Additions in Al-7Si-0.3Mg Cast Alloy," Scipta Metall. Mater., 1993, 29(11), pp. 1421-26.
    • (1993) Scipta Metall. Mater. , vol.29 , Issue.11 , pp. 1421-1426
    • Murali, S.1    Kashyap, K.T.2    Raman, K.S.3    Murthy, K.S.S.4
  • 43
    • 0035902693 scopus 로고    scopus 로고
    • Stress aging of Al-xCu alloys: Experiments
    • A.W. Zhu and E.A. Starke: "Stress Aging of Al-xCu Alloys: Experiments," Acta Mater. (USA), 2001, 49(12), pp. 2285-95.
    • (2001) Acta Mater. (USA) , vol.49 , Issue.12 , pp. 2285-2295
    • Zhu, A.W.1    Starke, E.A.2
  • 44
    • 0035358756 scopus 로고    scopus 로고
    • Effect of solution treatment temperature on precipitation behavior in Al-7%Mg alloy improved by chromium or manganese addition
    • M. Furuta and Y. Nakayama: "Effect of Solution Treatment Temperature on Precipitation Behavior in Al-7%Mg Alloy Improved by Chromium or Manganese Addition," J. Jap. Instit. Light Metals (Japan), 2001, 51(6), pp. 318-23.
    • (2001) J. Jap. Instit. Light Metals (Japan) , vol.51 , Issue.6 , pp. 318-323
    • Furuta, M.1    Nakayama, Y.2
  • 47
    • 0037942383 scopus 로고    scopus 로고
    • Polymer quenching of aluminum alloy parts of B-757 aircraft
    • R-H Wu and M. Feng: "Polymer Quenching of Aluminum Alloy Parts of B-757 Aircraft," Heat Treatment Met. (China), 2001, 1, pp. 48-50.
    • (2001) Heat Treatment Met. (China) , vol.1 , pp. 48-50
    • Wu, R.-H.1    Feng, M.2
  • 48
    • 0033204382 scopus 로고    scopus 로고
    • Effect of Mg on the ageing behavior of Al-Si-Cu 319 type aluminum casting alloys
    • P. Ouellet and F.H. Samuel: "Effect of Mg on the Ageing Behavior of Al-Si-Cu 319 Type Aluminum Casting Alloys," J. Mater. Sci., 1999, 34, pp. 4671-97.
    • (1999) J. Mater. Sci. , vol.34 , pp. 4671-4697
    • Ouellet, P.1    Samuel, F.H.2
  • 49
    • 0034487812 scopus 로고    scopus 로고
    • Fundamental aspects of hot isostatic pressing: An overview
    • H.V. Atkinson and S. Davies: "Fundamental Aspects of Hot Isostatic Pressing: An Overview," Metall. Mater. Trans. A, 2000, 31A, pp. 2981-3000.
    • (2000) Metall. Mater. Trans. A , vol.31 A , pp. 2981-3000
    • Atkinson, H.V.1    Davies, S.2
  • 50
    • 0035247042 scopus 로고    scopus 로고
    • Influence of casting technique and hot isostatic pressing on the fatigue of an Al-7Si-Mg alloy
    • C. Nyahumwa, N.R. Green, and J. Campbell: "Influence of Casting Technique and Hot Isostatic Pressing on the Fatigue of an Al-7Si-Mg Alloy," Metall. Mater. Trans. A, 2001, 32A, pp. 349-58.
    • (2001) Metall. Mater. Trans. A , vol.32 A , pp. 349-358
    • Nyahumwa, C.1    Green, N.R.2    Campbell, J.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.