Room temperature elastic properties of gadolinia-doped ceria as a function of porosity

Ceramics International

Volumn 39, Issue 6, 2013, Pages 6877-6886

  Fan, Xiaofeng ^a   Case, Eldon D ^a   Yang, Qing ^a   Nicholas, Jason D ^a  

^a Michigan State University   (United States)

Author keywords

B. Porosity; C. Mechanical properties; D. Ceria

Indexed keywords

ELASTIC PROPERTIES; GADOLINIA DOPED CERIA; GAS SEPARATION MEMBRANE; POISSON'S RATIO; RESONANT ULTRASOUND SPECTROSCOPY; ROOM TEMPERATURE; SOLID OXIDE FUEL CELLS (SOFCS); YOUNG'S MODULUS;

CHEMICAL REACTORS; ELASTIC MODULI; ELASTICITY; GAS PERMEABLE MEMBRANES; SINTERING; SOLID OXIDE FUEL CELLS (SOFC);

POROSITY;

EID: 84877700535     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2013.02.022     Document Type: Article

References (72)

1. B.C.H. Steele, and A. Heinzel Materials for fuel-cell technologies Nature 414 2001 345 352
2. J.W. Fergus Electrolytes for solid oxide fuel cells Journal of Power Sources 162 2006 30 40
3. H.J.M. Bouwmeester, and A.J. Burggraff Dense ceramic membranes for oxygen separation P.J. Gellings, H.J.M. Bouwmeester, The CRC Handbook of Solid State Electrochemistry 1997 CRC Press New York 481 554
4. A.L. Sauvet, and J. Fouletier Catalytic properties of new anode materials for solid oxide fuel cells operated under methane at intermediary temperature Journal of Power Sources 101 2001 259 266
5. 2- containing materials Catalysis Reviews: Science and Engineering 38 1996 439 509
6. J.B. Goodenough, and Y.-H. Huang Alternative anode materials for solid oxide fuel cells Journal of Power Sources 173 1 2007 1 10
7. J. Liu, B.D. Madsen, Z. Ji, and S.A. Barnett A fuel-flexible ceramic-based anode for solid oxide fuel cells Electrochemical and Solid-State Letters 5 6 2002 A122 A124
8. E.P. Murray, and S.A. Barnett (La,Sr)MnO3-(Ce,Gd)O(2-x) composite cathodes for solid oxide fuel cells Solid State Ionics 143 2001 265 273
9. J.D. Nicholas, L. Wang, A.V. Call, and S.A. Barnett Use of the simple infiltration microstructure polarization loss estimation (SIMPLE) model to predict the measured polarization resistance of infiltrated nano-composite solid oxide fuel cell cathodes Physical Chemistry Chemical Physics 14 2012 15379 15392
10. 1.95 SOFC cathodes produced using infiltrate solution additives Journal of the Electrochemical Society 157 2010 B536 B541
11. M. Shah, J.D. Nicholas, and S.A. Barnett Prediction of infiltrated solid oxide fuel cell cathode polarization resistance using simple models Electrochemistry Communications 11 2009 2 5
12. 3-x into Gd-doped ceria Solid State Ionics 179 2008 2059 2064
13. 3-δ into Gd-doped ceria Journal of the Electrochemical Society 158 6 2011 B650 B659
14. A.J. Samson, P. Hjalmarsson, M. Søgaard, J. Hjelm, and N. Bonanos Highly durable anode supported solid oxide fuel cell with an infiltrated cathode Journal of Power Sources 216 0 2012 124 130
15. S.P. Jiang A review of wet impregnation - an alternative method for the fabrication of high performance and nano-structured electrodes of solid oxide fuel cells Materials Science and Engineering A: Structural Materials, Properties, Microstructure and Processing 418 1-2 2006 199 210
16. J.M. Vohs, and R.J. Gorte High-performance SOFC cathodes prepared by infiltration Advanced Materials 21 9 2009 943 956
17. B. Sun, R.A. Rudkin, and A. Atkinson Effect of thermal cycling on residual stress and curvature of anode-supported SOFCs Fuel Cells 9 6 2009 805 813
18. C.K. Lin, T.T. Chen, Y.P. Chyou, and L.K. Chiang Thermal stress analysis of a planar SOFC stack Journal of Power Sources 164 1 2007 238 251
19. C.S. Montross, H. Yokokawa, and M. Dokiya Thermal stresses in planar solid oxide fuel cells due to thermal expansion differences British Ceramic Transactions 101 3 2002 85 93
20. J.E. Shemilt, H.M. Williams, M.J. Edirsinghe, J.R.G. Evans, and B. Ralph Fracture toughness of doped-ceria ceramics Scripta Materialia 36 1997 929 934
21. 2-δ (M=Y, Gd, Sm, Nd, La) solid electrolyte materials for solid oxide fuel cells International Journal of Hydrogen Energy 35 2 2010 745 752
22. M. Morales, J.J. Roa, X.G. Capdevila, M. Segarra, and S. Pinol Mechanical properties at the nanometer scale of GDC and YSZ used as electrolytes for solid oxide fuel cells Acta Materialia 58 7 2010 2504 2509
23. x (R=Y, Gd, and Sm; x=0.02-0.20) ceramics Solid State Ionics 176 31-34 2005 2417 2421
24. K.R. Reddy, and K. Karan Sinterability, mechanical, microstructural, and electrical properties of gadolinium-doped ceria electrolyte for low-temperature solid oxide fuel cells Journal of Electroceramics 15 1 2005 45 56
25. 2 at low stresses Journal of Materials Science 16 20 1997 1637 1639
26. A. Nakajo, J. Kuebler, A. Faes, U.F. Vogt, H.J. Schindler, L.-K. Chiang, S. Modena, J. Van herle, and T. Hocker Compilation of mechanical properties for the structural analysis of solid oxide fuel cell stacks. Constitutive materials of anode-supported cells Ceramics International 38 5 2012 3907 3927
27. A. Nakajo, F. Mueller, J. Brouwer, J. Van Herle, and D. Favrat Mechanical reliability and durability of SOFC stacks. Part II: modelling of mechanical failures during ageing and cycling International Journal of Hydrogen Energy 37 11 2012 9269 9286
28. 1.95 Scripta Materialia 38 2 1997 315 320
29. J.D. Nicholas, and L.C. DeJonghe Prediction and evaluation of sintering aids for cerium gadolinium oxide Solid State Ionics 178 19-20 2007 1187 1194
30. A. Migliori, and J.D. Maynard Implementation of a modern resonant ultrasound spectroscopy system for the measurement of the elastic moduli of small solid specimens Review of Scientific Instruments 76 12 2005
31. A. Migliori, J.L. Sarrao, W.M. Visscher, T.M. Bell, M. Lei, Z. Fisk, and R.G. Leisure Resonant ultrasound spectroscopic techniques for measurement of the elastic moduli of solids Physica B 183 1-2 1993 1 24
32. X. Fan, E.D. Case, F. Ren, Y. Shu, and M.J. Baumann Part II: fracture strength and elastic modulus as a function of porosity for hydroxyapatite and other brittle materials Journal of the Mechanical Behavior of Biomedical Materials 8 2012 99 110
33. F. Ren, E.D. Case, A. Morrison, M. Tafesse, and M.J. Baumann Resonant ultrasound spectroscopy measurement of Young's modulus, shear modulus and Poisson's ratio as a function of porosity for alumina and hydroxyapatite Philosophical Magazine 89 14 2009 1163 1182
34. J.E. Ni, E.D. Case, J.S. Sakamoto, and J.B. Wolfenstein Room temperature elastic moduli and vickers hardness of hot-pressed LLZO cubic garnet Journal of Materials Science 47 2012 7978 7985
35. H. Seiner, P. Sedlak, L. Bodnarova, A. Kruisova, M. Landa, A. de Pablos, and M. Belmonte Sensitivity of the resonant ultrasound spectroscopy to weak gradients of elastic properties Journal of the Acoustical Society of America 131 5 2012 3775 3785
36. A.Q. Morrison, E.D. Case, F. Ren, A.J. Baumann, D.C. Kleinow, J.E. Ni, T.P. Hogan, J. D'Angelo, N.A. Matchanov, T.J. Hendricks, N.K. Karri, C. Cauchy, J. Barnard, and M.G. Kanatzidis Elastic modulus, biaxial fracture strength, electrical and thermal transport properties of thermally fatigued hot pressed LAST and LASTT thermoelectric materials Materials Chemistry and Physics 134 2-3 2012 973 987
37. 2Si thermoelectric materials Journal of Electronic Materials 41 6 2012 1210 1216
38. D.H. Hurley, S.J. Reese, S.K. Park, Z. Utegulov, J.R. Kennedy, and K.L. Telschow In situ laser-based resonant ultrasound measurements of microstructure mediated mechanical property evolution Journal of Applied Physics 107 6 2010
39. G. Kaplan, T.W. Darling, and K.R. McCall Resonant ultrasound spectroscopy and homogeneity in polycrystals Ultrasonics 49 1 2009 139 142
40. S. Gorsse, and D.B. Miracle Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements Acta Materialia 51 9 2003 2427 2442
41. O.V. Vdovychenko, V.S. Voropaev, and A.N. Slipenyuk Effect of microstructure on Young's modulus of extruded Al-SiC composites studied by resonant ultrasound spectroscopy Journal of Materials Science 41 24 2006 8329 8338
42. E.E. Underwood, A.R. Colcord, and R.C. Waugh Quantitative relationships for random microstructures R.M. Fulrath, J.A. Pask, Ceramic Microstructures 1968 John Wiley & Sons New York 25
43. X. Fan, E.D. Case, F. Ren, Y. Shu, and M.J. Baumann Part I: porosity dependence of the weibull modulus for hydroxyapatite and other brittle materials Journal of the Mechanical Behavior of Biomedical Materials 8 2012 21 36
44. 3 Journal of the American Ceramic Society 69 2 1986 143 149
45. A. Selcuk, and A. Atkinson Elastic properties of ceramic oxides used in solid oxide fuel cells Journal of the European Ceramic Society 17 1997 1523 1532
46. 2-δ at high temperatures under controlled atmospheres Solid State Ionics 198 1 2011 32 38
47. T. Kushi, K. Sato, A. Unemoto, K. Amezawa, and T. Kawada Investigation of high tempearture elastic modulus and internal friction of SOFC electrolytes using resonance method Electrochemical Society Transactions 25 2 2009 1673 1677
48. Y. Wang, K. Duncan, E.D. Wachsman, and F. Ebrahimi The effect of oxygen vacancy concentration on the elastic modulus of fluorite-structured oxides Solid State Ionics 178 1-2 2007 53 58
49. E. Wachtel, and I. Lubomirsky The elastic modulus of pure and doped ceria Scripta Materialia 65 2 2011 112 117
50. R.W. Rice Porosity of Ceramics 1998 Marcel Dekker New York
51. D.P.H. Hasselman On the porosity dependence of the elastic moduli of polycrystalline refractory materials Journal of the American Ceramic Society 45 9 1962 452 453
52. N. Ramakrishnan, and V.S. Arunachalam Effective elastic moduli of porous ceramic materials Journal of the American Ceramic Society 76 11 1993 2745 2752
53. G. Simmons, and H. Wang Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook 1971 MIT Press Cambridge, MA
54. 2 Journal of Physics: Condensed Matter 18 42 2006 9615 9624
55. 2 by statistical moment method Physica B 406 21 2011 4014 4018
56. T. Hashida, K. Sato, Y. Takeyama, T. Kawada, and J. Mizusaki Deformation and fracture characteristics of zirconia and ceria-based electrolytes for SOFCs under reducing atmospheres Electrochemical Society Transactions 25 2 2009 1565 1575
57. X. Huang, and Q. Yang Effects of co-doping on elastic modulus for zirconia based ternary ceramic materials Materials Science and Technology 24 6 2008 751 755
58. K.L. Duncan, Y.L. Wang, S.R. Bishop, F. Ebrahimi, and E.D. Wachsman The role of point defects in the physical properties of nonstoichiometric ceria Journal of Applied Physics 101 4 2007
59. W.C. Oliver, and G.M. Pharr An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments Journal of Materials Research 7 6 1992 1564 1583
60. M. Radovic, E. Lara-Curzio, and L. Riester Comparison of different experimental techniques for determination of elastic properties of solids Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 368 1-2 2004 56 70
61. 3 skutterudite materials Journal of Alloys and Compounds 504 2 2010 303 309
62. D. Hardy, and D.J. Green Mechanical properties of partially sintered alumina Journal of the European Ceramic Society 15 8 1995 769 775
63. K.K. Phani, and A. Novel Method of predicting ultrasonic and elastic properties of isotropic ceramic materials after sintering from the properties of partially sintered or green compacts Journal of the American Ceramic Society 91 1 2008 215 222
64. J.E. Ni, F. Ren, E.D. Case, and E.J. Timm Porosity dependence of elastic moduli in LAST (lead-antimony-silver-tellurium) thermoelectric materials Materials Chemistry and Physics 118 2-3 2009 459 466
65. A.R. Boccaccini Effective elastic moduli of porous ceramic materials-comment Journal of the American Ceramic Society 77 10 1994 2779 2781
66. J.B. Wachtman, W.R. Cannon, and M.J. Matthewson Mechanical Properties of Ceramics 2009 John Wiley & Sons New York
67. J. Luo, and R. Stevens Porosity dependence of elastic moduli and hardness of 3Y-TZP ceramics Ceramics International 25 3 1999 281 286
68. O.O. Oduleye, S.J. Penn, and N.M. Alford The mechanical properties of (Bi-Pb)SrCaCuO Superconductor Science and Technology 11 9 1998 858 865
69. 4 Journal of the American Ceramic Society 58 1-2 1975 78 79
70. S.C. Nanjangud, R. Brezny, and D.J. Green Strength and Youngs modulus behavior of a partially sintered porous alumina Journal of the American Ceramic Society 78 1 1995 266 268
71. Z.Y. Deng, J.F. Yang, Y. Beppu, M. Ando, and T. Ohji Effect of agglomeration on mechanical properties of porous zirconia fabricated by partial sintering Journal of the American Ceramic Society 85 8 2002 1961 1965
72. I.H. Oh, N. Nomura, N. Masahashi, and S. Hanada Mechanical properties of porous titanium compacts prepared by powder sintering Scripta Materialia 49 12 2003 1197 1202