Room temperature Young's modulus, shear modulus, and Poisson's ratio of Ce0.9Fe3.5Co0.5Sb12 and Co 0.95Pd0.05Te0.05Sb3 skutterudite materials

Journal of Alloys and Compounds

Volumn 504, Issue 2, 2010, Pages 303-309

  Schmidt, Robert D ^a   Ni, Jennifer E ^a   Case, Eldon D ^a   Sakamoto, Jeffery S ^a   Kleinow, Daniel C ^a   Wing, Bradley L ^a   Stewart, Ryan C ^a   Timm, Edward J ^a  

^a Michigan State University   (United States)

Author keywords

Elasticity; Microstructure; Nanoindentation; Thermoelectric materials; Ultrasonics

Indexed keywords

CE ADDITION; CE-DOPING; DENSE SPECIMENS; NANO-INDENTATION MEASUREMENTS; P-TYPE; POISSON'S RATIO; RELATIVE DENSITY; RESONANT ULTRASOUND SPECTROSCOPY; ROOM TEMPERATURE; SHEAR MODULUS; SKUTTERUDITE MATERIALS; SKUTTERUDITES; THERMOELECTRIC MATERIAL; THERMOELECTRIC MATERIALS; YOUNG'S MODULUS;

BILLETS (METAL BARS); CERIUM; CERIUM COMPOUNDS; ELASTICITY; MICROSTRUCTURE; NANOINDENTATION; PALLADIUM; POISSON RATIO; SHEAR STRAIN; SPECTROSCOPY; TELLURIUM COMPOUNDS; THERMOELECTRIC EQUIPMENT; THERMOELECTRICITY; ULTRASONICS;

ELASTIC MODULI;

EID: 77955426526     PISSN: 09258388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jallcom.2010.06.003     Document Type: Article

References (33)

1. G. Kaiper U.S. Energy Flow Trends - 2002 2004 Office of Scientific and Technical Information Oak Ridge, TN
2. D.M. Rowe CRC Handbook on Thermoelectrics 1995 CRC Press Boca Raton, FL p. 421
3. T.P. Hogan, A. Downey, J. Short, J. D'Angelo, C.-I. Wu, E. Quarez, J. Androulakis, P.F.P. Poudeu, J.R. Sootsman, D.-Y. Chung, M.G. Kanatzidis, S.D. Mahanti, E.J. Timm, H. Schock, F. Ren, J. Johnson, and E.D. Case Nanostructured thermoelectric materials and high efficiency power generation modules J. Electron. Mater. 36 2007 704 710
4. J. Yang, and T. Caillat Thermoelectric materials for space and automotive power generation Mater. Res. Bull. 31 2006 224 229
5. F. Stabler, Automotive Applications of High Efficiency Thermoelectrics, Presented at DARPA/ONR Program Review and DOE High Efficiency Thermoelectric Workshop San Diego, CA, March 24-27, 2002.
6. 3 J. Phys. Chem. Solids 58 1997 1119 1125
7. C. Uher, J. Yang, S. Hu, D.T. Morelli, and G.P. Meisner Transport properties of pure and doped MNiSn (M = Zr, Hf) Phys. Rev. B 59 1999 8615 8621
8. G.S. Nolas, M. Kaeser, R. Littleton IV, and T.M. Tritt High figure of merit in partially filled ytterbium skutterudite materials Appl. Phys. Lett. 77 2000 1855 1857
9. V.N. Kaliakin Introduction to Approximate Solution Techniques, Numerical Modeling, and Finite Element Methods 2002 Marcel Dekker, Inc. New York
10. J.N. Reddy An Introduction to the Finite Element Method 3rd edition 2006 McGraw-Hill Higher Education New York
11. E.D. Case The saturation of thermomechanical fatigue in brittle materials M.H. Alibadi, Thermo-mechanical Fatigue and Fracture 2002 WIT Press Southampton, UK 137 208
12. E.D. Case, and Y. Kim The effect of surface-limited microcracks on the effective Young's modulus of ceramics J. Mater. Sci. 28 1993 1885 1900 (Pubitemid 23640009)
13. 3 using small angle neutron scattering and elasticity measurements J. Mater. Sci. 19 1984 2962 2968
14. F. Ren, E.D. Case, A. Morrison, M. Tafesse, and M.J. Baumann Young's modulus, shear modulus and Poisson's ratio as a function of porosity for alumina and hydroxyapaptite Philos. Mag. 89 2009 1163 1182
15. J.E. Ni, F. Ren, E.D. Case, and E.J. Timm Porosity dependence of elastic moduli in LAST (lead-antimony-silver-tellurium) thermoelectric materials Mater. Chem. Phys. 118 2009 459 466
16. 3 fabricated by spark plasma sintering Scripta Mater. 52 2005 347 351
17. 3 by spark plasma sintering Mater. Sci. Eng. B: Solid 117 2005 334 338 (Pubitemid 40274982)
18. F. Ren, E.D. Case, E.J. Timm, M.D. Jacobs, and H.J. Schock Weibull analysis of the biaxial fracture strength of a cast p-type LAST-T thermoelectric material Philos. Mag. Lett. 86 2006 673 682
19. S.S. Kim, S. Yamamoto, and T. Aizawa Thermoelectric properties of anisotropy-controlled p-type Bi-Te-Sb system via bulk mechanical alloying and shear extrusion J. Alloys Compd. 375 2004 107 113
20. A.L. Pilchak, F. Ren, E.D. Case, E.J. Timm, H.J. Schock, C.-I. Wu, and T.P. Hogan Characterization of dry milled powders of LAST (lead-antimony-silver- tellurium) thermoelectric material Philos. Mag. 87 2007 4567 4591
21. B.D. Hall, E.D. Case, F. Ren, J.R. Johnson, and E.J. Timm Agglomeration during wet milling of LAST (lead-antimony-silver-tellurium) powders Mater. Chem. Phys. 113 2009 497 502
22. A. Migliori, and J.L. Sarrao Resonant Ultrasound Spectroscopy: Applications to Physics, Materials Measurements, and Nondestructive Evaluation 1997 Academic Press New York
23. F. Ren, E.D. Case, J.R. Sootsman, M.G. Kanatzidis, H. Kong, C. Uher, E. Lara-Curzio, R.M. Trejo, and C. Uher The high temperature elastic moduli of polycrystalline PbTe measured by resonant ultrasound spectroscopy Acta Mater. 56 2008 5954 5963
24. F. Ren, E.D. Case, J.E. Ni, E.J. Timm, E. Lara-Curzio, R.M. Trejo, C.-H. Lin, and M.G. Kanatzidis Temperature-dependent elastic moduli of lead telluride-based thermoelectric materials Philos. Mag. 89 2009 143 167
25. W.F. McClure, Powder Diffraction File Sets 19 to 20 1979 International Centre for Diffraction Data Swarthmore, PA 107
26. W.F. McClure, Powder Diffraction File Sets 29 to 30 1987 International Centre for Diffraction Data Swarthmore, PA 50
27. B.D. Cullity, and S.R. Stock Elements of X-ray Diffraction 3rd ed. 2001 Prentice Hall Upper Saddle River, NJ Chapter 5
28. R.W. Rice Mechanical Properties of Ceramics and Composites 2000 Marcel Dekker New York pp. 308-312
29. V. Ravi, S. Firdosy, T. Caillat, B. Lerch, A. Calamino, R. Pawlik, M. Nathal, A. Sechrist, J. Buchhalter, and S. Nutt Mechanical properties of thermoelectric skutterudites Mohamed S. El-Genk, Proceedings of Space Technology and Applications International Forum - STAIF 2008, vol. 969 American Institute of Physics Conference Proceedings, Albuquerque, NM, 10-14 February 2008 2008 656 662
30. C. Recknagel, N. Reinfried, P. Höhn, W. Schnelle, H. Rosner, Yu. Grin, and A. Leithe-Jasper Application of spark plasma sintering to the fabrication of binary and ternary skutterudites Sci. Technol. Adv. Mater. 8 2007 357 363
31. W.C. Oliver, and G.M. Pharr An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments J. Mater. Res. 7 1992 1564 1583
32. M. Radovic, E. Lara-Curzio, and L. Reister Comparison of different experimental techniques for determination of elastic properties of solids Mater. Sci. Eng. A 368 2004 56 70 (Pubitemid 38329588)
33. Aluminum Association, International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys, Arlington, VA, 2009.