Assessment of waste heat recovery from a heavy-duty truck engine by means of an ORC turbogenerator

Journal of Engineering for Gas Turbines and Power

Volumn 135, Issue 4, 2013, Pages

  Lang, Wolfgang ^a   Colonna, Piero ^b   Almbauer, Raimund ^a  

^a GRAZ UNIVERSITY OF TECHNOLOGY   (Austria)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOTIVE APPLICATIONS; AUTOMOTIVE SECTOR; DESIGN AND CONSTRUCTION; DYNAMIC OPERATIONS; FEASIBILITY STUDIES; ORGANIC RANKINE CYCLE(ORC); PRELIMINARY DESIGN; WASTE HEAT RECOVERY SYSTEMS;

AUTOMOTIVE INDUSTRY; FLUIDS; TURBINES; TURBOGENERATORS;

TRUCKS;

EID: 84877614440     PISSN: 07424795     EISSN: 15288919     Source Type: Journal    
DOI: 10.1115/1.4023123     Document Type: Article

References (61)

1. Freymann, R., Strobl, W., and Obieglo, A., 2008, "The Turbosteamer: A System Introducing the Principle of Cogeneration in Automotive Applications," MTZ Motortech. Z., 69, pp. 20-27.
2. Lodwig, E., 1970, "Performance of a 35 HP Organic Rankine Cycle Exhaust Gas Powered System," SAE Paper No. 700160.
3. Doyle, E. F., Di Nanno, L., and Kramer, S., 1979, "Installation of a Diesel Organic Rankine Compound Engine in a Class 8-Truck for a Single Vehicle Test," SAE Paper No. 790646.
4. Patel, P. S. and Doyle, E. F., 1976, "Compounding the Truck Diesel Engine With an Organic Rankine Cycle System," SAE Paper No. 760343.
5. Platell, O. B., 1976, "Progress of Saab Scania's Steam Power Project," SAE Paper No. 760344.
6. Di Nanno, L. R., Di Bella, F. A., and Koplow, M. D., 1983, "An RC-1 Organic Rankine Bottoming Cycle for an Adiabatic Diesel Engine," Report, DOE/NASA/0302-1, NASA CR-168256, December.
7. Koplow, M. D., Di Nanno, L. R., and Di Bella, F. A., 1984, "Status Report for an RC-1 Organic Rankine Bottoming Cycle for an Adiabatic Diesel Engine," Proceedings of the 21st Automotive Technology Development Contractors' Coordination Meeting, Dearborn, MI, October 21-24.
8. Teng, H., Regner, G., and Cowland, C., 2007, "Waste Heat Recovery of Heavy-Duty Diesel Engines by Organic Rankine Cycle Part I: Hybrid Energy System of Diesel and Rankine Engines," SAE Paper No. 2007-01-0537.
9. Teng, H., Regner, G., and Cowland, C., 2007, "Waste Heat Recovery of Heavy-Duty Diesel Engines by Organic Rankine Cycle Part II: Working Fluids for WHR-ORC," SAE Technical Paper 2007-01-0543.
10. Hountalas, D. T., Katsanos, C. O., Rogadiks, E. D., and Kouremenos, D. A., 2007, "Study of Available Exhaust Gas Hat Recovery Technologies for HD Diesel Engine Applications," Int. J. Alternative Propul., 1(2/3), pp. 228-249.
11. Nelson, C., 2006, "Achieving High Efficiency at 2010 Emissions," Diesel Engine-Efficiency and Emissions Research (DEER) Conference, Detroit, MI, August 23.
12. Nelson, C., 2008, "Exhaust Energy Recovery," Semi-Mega Merit Review, Department of Energy, Washington, DC, February 27.
13. Nelson, C., 2010, "Exhaust Energy Recovery," Annual Merit Review, Department of Energy, Washington, DC, June 10.
14. Espinosa, N., Tilman, L., Lemort, V., Quoilin, S., and Lombard, B., 2010, "Rankine Cycle for Waste Heat Recovery on Commercial Trucks: Approach, Constraints and Modelling," 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14-17.
15. Srinivasan, K. K., Mago, P. J., and Krishnan, S. R., 2010, "Analysis of Exhaust Waste Heat Recovery From a Dual Fuel Low Temperature Combustion Engine Using an Organic Rankine Cycle," Int. J. Energy, 35, pp. 2387-2399.
16. Wang, T., Zhang, Y., Peng, Z., and Shu, G., 2011, "A Review of Researches on Thermal Exhaust Heat Recovery With Rankine Cycle," Renew. Sustain. Energy Rev., 15, pp. 2862-2871.
17. Buschmann, G., Clemens, H., Hoetger, M., and Mayer B., 2001, "Der Dampfmotor-Entwicklungsstand und Marktchancen," MTZ Motortech. Z., 62, pp. 2-10.
18. van der Stelt, T. P., Woudstra, N., and Colonna, P., 1985-2012, "Cycle-Tempo: A Program for Thermodynamic Modeling and Optimization of Energy Conversion Systems," http://www.asimptote.com/software/cycletempo
19. Albrigo, D. M., 2007, "Binary Organic Rankine Cycle Turbogenerator: A Viable Option for High Efficiency Power Conversion," Master thesis, ET-2265, Delft University of Technology, Delft, The Netherlands.
20. Ganassin, S., 2009, "Steady State Models for Organic Rankine Cycle Turbogenerators," Master thesis, ET-2373, Delft University of Technology, Delft, The Netherlands.
21. Westerdijk, T., 2010, "Island Operation of Organic Rankine Cycle Turbogenerators," Master thesis, ET-2427, Delft University of Technology, Delft, The Netherlands.
22. Colonna, P., Nannan, N. R., Guardone, A., and Lemmon, E. W., 2006, "Multiparameter Equations of State for Selected Siloxanes," Fluid Phase Equilib., 244, pp. 193-211. (Pubitemid 43816191)
23. Fernández, F. J., Prieto, M. M., and Suárez, I., 2011, "Thermodynamic Analysis of High-Temperature Regenerative Organic Rankine Cycles Using Siloxanes as Working Fluids," Energy, 36, pp. 5239-5249.
24. Nannan, N. R., Colonna, P., Tracy, C. M., Rowley, R. L., and Hurly, J. J., 2007, "Ideal-Gas Heat Capacities of Dimethylsiloxanes From Speed-of-Sound Measurements and Ab Initio Calculations," Fluid Phase Equilib., 257, pp. 102-113. (Pubitemid 46962917)
25. Colonna, P., Nannan, N. R., and Guardone, A., 2008, "Multiparameter Equations of State for Siloxanes: [(CH3)3-Si-O1/2]2-[O-Si-(CH3)2]i1/41,...,3, and [O-Si-(CH3)2]6," Fluid Phase Equilib., 263, pp. 115-130.
26. Nannan, R. N., and Colonna, P., 2009, "Improvement on Multiparameter Equations of State for Dimethylsiloxanes by Adopting More Accurate Ideal-Gas Isobaric Heat Capacities: Supplementary to P. Colonna, N. R. Nannan, A. Guardone, E. W. Lemmon, Fluid Phase Equilib. 244, 193 (2006)," Fluid Phase Equilib., 280(1-2), pp. 151-152.
27. Wagner, W., and Kruse, A., 1998, Properties of Water and Steam, The Industrial Standard IAPWS-IF97 for the Thermodynamic Properties and Supplementary Equations for Other Properties, Springer, Berlin.
28. Colonna, P., and van der Stelt, T. P., 2004-2012, "FluidProp: A Program for the Estimation of Thermo Physical Properties of Fluids," Software, http://www.asimptote.com/software/fluidprop
29. Whitfield, A., and Baines, N. C., 1990, Design of Radial Turbomachines, Longman Scientific and Technical, Harlow, England.
30. Lang, W., 2010, PHE-DESIGN v1.0 software, TU-Graz, Styria, Austria.
31. AspenTech, 2009, Exchanger Design and Rating (EDR) v7.1, AspenTech, Burlington, MA.
32. Quoilin, S., 2010, "Sustainable Energy Conversion Through the Use of Organic Rankine Cycles for Waste Heat Recovery and Solar Applications," Ph.D. thesis, University of Liège, Liège, Belgium.
33. Ray, S. K., and Moss, G., 1965, "Fluorochemicals as Working Fluids for Small Rankine Cycle Power Units," Adv. Energy Convers., 6, pp. 89-102.
34. Colonna, P., 1991, "Fluidi Silossanici per Cicli di Potenza Spaziali (Siloxane Fluids for Space Power Cycles)," Master thesis, Politecnico di Milano, Milano, Italy.
35. Karellas, S., and Schuster, A., 2008, "Supercritical Fluid Parameters in Organic Rankine Cycle Applications," Int. J. Thermodyn., 11(3), pp. 101-108.
36. Invernizzi, C. Iora, P. and Silva, P., 2007, "Bottoming Micro-Rankine Cycles for Micro-Gas Turbines," Appl. Thermal Eng., 27, pp. 100-110. (Pubitemid 44486888)
37. Marciniak, T. J., Krazinski, J. L., Bratis, J. C., Bushby, H. M., and Buyco, E. H., 1981, "Comparison of Rankine-Cycle Power Systems: Effects of Seven Working Fluids," Argonne National Laboratory, Argonne, IL.
38. Liu, B. T., Chien, K. H., and Wang, C. C., 2002, "Effect of Working Fluids on Organic Rankine Cycle forWaste Heat Recovery," Energy, 29, pp. 1207-1217.
39. Lewandowski, G. A., and Struss, R. B., 1980, "Final Report: Rankine Bottoming Cycle Safety Analysis," Vektor Engineering Inc., Springfield, NJ.
40. Angelino, G., Gaia, M., and Macchi, E., 1984, "A Review of Italian Activity in the Field of Organic Rankine Cycles," Proceedings of the Intl. VDI Seminar, Bulletin 539, VDI-Düsseldorf, Düsseldorf, Germany, pp. 465-482. (Pubitemid 15504430)
41. Angelino, G., and Invernizzi, C., 1993, "Cyclic Methylsiloxanes as Working Fluids for Space Power Cycles," ASME J. Solar Energy Eng., 115, pp. 130-137.
42. Angelino, G., and Colonna, P., 2000, "Air Cooled Siloxane Bottoming Cycle for Molten Carbonate Fuel Cells," Fuel Cell Seminar, Portland, OR, October 30-November 2.
43. Angelino, G., and Colonna, P., 2000, "Organic Rankine Cycles (ORCs) for Energy Recovery From Molten Carbonate Fuel Cells," Proceedings of 35th Intersociety Energy Conversion Engineering Conference and Exhibit (IECEC), Las Vegas, NV, July 24-28.
44. Badr, O., Probert, S. D., and O'Callaghan, P. W., 1985, "Selecting a Working Fluid for a Rankine-Cycle Engine," Appl. Energy, 21, pp. 1-42. (Pubitemid 15590569)
45. Badr, O., Naik, S., O'Callaghan, and Probert, S. D., 1991, "Expansion Machine for a Low Power-Output Steam Rankine-Cycle Engine," Appl. Energy, 39, pp. 93-116. (Pubitemid 21649953)
46. Hung, T. C., Shai, T. Y., and Wang, S. K., 1997, "A Review of Organic Rankine Cycles (ORCs) for the Recovery of Low-Grade Waste Heat," Energy, 11(7), pp. 661-667. (Pubitemid 27206837)
47. Macchi, E., and Perdichizzi, A., 1981, "Efficiency Prediction for Axial-Flow Turbines Operating With Nonconventional Fluids," ASME J. Eng. Power, 103, pp. 718-724. (Pubitemid 12447491)
48. Persson, J. G., 1990, "Performance of Fluid Machinery During Conceptual Design," Ann. CIRP, 39(1), pp. 137-140.
49. Brasz, J., 2008, "Assessment of C6F as Working Fluid for Organic Rankine Cycle Applications," Proceedings of the International Refrigeration and Air Conditioning Conference, Purdue, West Lafayette, IN, July 14-17.
50. Angelino, G., and Colonna, P., 1998, "Multicomponent Working Fluids for Organic Rankine Cycles (ORCs)," Energy, 23(6), pp. 449-463. (Pubitemid 28335752)
51. Larjola, J., 1995, "Electricity from Industrial Waste Heat Using High-Speed Organic Rankine Cycle," Int. J. Product. Econ., 41, pp. 227-235.
52. Calderazzi, L., and Colonna, P., 1997, "Thermal Stability of R-134a, R-141b, R-13I1, R-7146, R-125 Associated With Stainless Steel As a Containing Material," Int. J. Refrig., 20(6), pp. 381-389. (Pubitemid 127402499)
53. Tabor, H., and Bronicki, L., 1964, "Establishing Criteria for Small Vapour Turbines," SAE National Transportation, Power Plant, Fuels and Lubricants Meeting, Baltimore, MD, October 19-23, Paper 931C.
54. Colonna, P., 1996, "Fluidi di Lavoro Multi Componenti Per Cicli Termodinamici di Potenza (Multicomponent Working Fluids for Power Cycles)," Ph.D. thesis, Politecnico di Milano, Milano, Italy.
55. Colonna, P., Harinck, J., Rebay, S., and Guardone, A., 2008, "Real-Gas Effects in Organic Rankine Cycle Turbine Nozzles," J. Propul. Power, 24, pp. 282-294. (Pubitemid 351683638)
56. Whelan, M. J., Estrada, E., and Van Egmond, R. A., 2004, "A Modelling Assessment of the Atmospheric Fate of Volatile Methyl Siloxanes and Their Reaction Products," Chemosphere, 57(10), pp. 1427-1437. (Pubitemid 39422323)
57. Carpenter, J. C., Cella, J. A., and Dorn, S. B., 1995, "Study of the Degradation of Polydimethylsiloxanes on Soil," Environ. Sci. Technol., 29(4), pp. 864-868.
58. Smith, J. M., van Ness, H. C., and Abbot, M. M., 2005, Introduction to Chemical Engineering Thermodynamics, 7th ed., McGraw-Hill, Boston, pp. 597-602.
59. Vernau, A., 1987, "Supersonic Turbines for Organic Rankine Cycles From 3 kW to 1300 kW," Von Karman Institute for Fluid Dynamics, Lecture Series 1987-07.
60. Pasquale, D., 2008, "zFlow 3: a RANS Solver With Accurate Fluid Property Models for Turbomachinery Applications," Master thesis, ET-2265, Delft University of Technology, The Netherlands.
61. Pasquale, D., Ghidoni, A., and Rebay, S., 2012,"Shape Optimization of an ORC Radial Turbine Nozzle," ASME J. Eng. Gas Turbines Power (in press).