White structure flaking (WSF) in wind turbine gearbox bearings: Effects of butterflies and white etching cracks (WECs)

Energy Materials: Materials Science and Engineering for Energy Systems

Volumn 7, Issue 2, 2012, Pages 3-22

  Evans, M H ^a  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

Author keywords

Brittle flaking; Butterflies; Microstructural change; Rolling contact fatigue; White etching; Wind turbine gearbox

Indexed keywords

BRITTLE FLAKING; BUTTERFLIES; MICROSTRUCTURAL CHANGES; ROLLING CONTACT FATIGUE; WIND TURBINE GEARBOXES;

CARBON NITRIDE; CRACKS; GRAIN REFINEMENT; HYDROGEN; LOW CARBON STEEL; WIND TURBINES;

ETCHING;

EID: 84876811332     PISSN: 17489237     EISSN: 17489245     Source Type: Journal    
DOI: None     Document Type: Review

References (167)

1. M. N. Kotzalas and G. L. Doll: Tribological advancements for reliable wind turbine performance, Phil. Trans. R. Soc. A, 2010, 368A, (1929), 4829-4850.
2. K. Ihata, T. Shiga and A. Umeda: Rolling bearing assembly having magnet to prevent brittle flaking, US Patent 7,520,675 B2, 2009.
3. S. Tanaka, N. Mitamura and Y. Murakami: Influence of sliding and chromium content in the steel on the white structural change under rolling contact, Proc. Global Powertrain Cong., Dearborn, MI, USA, September 2004, Global Powertrain Congress, Vol. 32, 6-13.
4. K. Iso, A. Yokouchi and H. Takemura: Research work for clarifying the mechanism of white structure flaking and extending the life of bearings, SAE World Cong., Detroit, MI, USA, April 2005, SAE International, Paper 2005-01-1868.
5. J. Luyckx, W. Broeders and J. Geertsom: Method for increasing the fatigue strength of a predominantly steel mechanical part of a wind turbine and/or for reducing the tendency to form what are called white etching cracks or brittle flakes in such steel mechanical parts, US Patent 2009/0288742 A1, 2009.
6. Northwest Laboratories of Seattle, Inc., Seattle, WA, USA, 2007.
7. Wind turbine gearbox reconstruction in Fig. 3 based on model from National Renewable Energy Laboratory (NREL), Gearbox Reliability Collaborative.
8. J. Barry and G. Byrne: TEM study on the surface white layer in two turned hardened steels, Metall. Mater. Trans. A, 2002, 325A, 356-364.
9. A. Ramesh, S. Melkote, L. Allard, L. Riester and T. Watkins: Analysis of white layers formed in hard turning of AISI 52100 steel, Mater. Sci. Eng. A, 2005, A390, (1-2), 88-97.
10. D. Schwach and Y. Guo: A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue, Int. J. Fatigue, 2006, 28, (12), 1838-1844.
11. G. Baumann, K. Knothe and H.-J. Fecht: Surface modification, corrugation and nanostructure formation of high speed railway tracks, Nanostruct. Mater., 1997, 9, 751-754.
12. R. Carroll and J. Beynon: Rolling contact fatigue of white etching layer: Part 1 crack morphology, Wear, 2007, 262, (9-10), 1253-1266.
13. I. M. Widiyarta, F. J. Franklin and A. Kapoor: Modelling thermal effects in ratcheting-led wear and rolling contact fatigue, Wear, 2008, 265, (9-10), 1325-1331.
14. G. Baumann, H. J. Fecht and S. Liebelt: Formation of whiteetching layers on rail treads, Wear, 1996, 191, 133-140.
15. H. Yokoyama, S. Mitao, S. Yamamoto, Y. Kataoka and T. Sugiyama: High strength bainitic steel rails for heavy haul railways with superior damage resistance, NKK Tech. Rev., 2001, 84, 44-51.
16. T. W. Wright: The physics and mathematic of adiabatic shear bands; 2002, Cambridge, Cambridge University Press.
17. S. M. Walley: Shear localization: a historical overview, Metall. Mater. Trans. A, 2007, 38A, (11), 2629-2654.
18. H. Schlicht, E. Schreiber and O. Zwirlein: Effects of material properties on bearing steel fatigue strength, in Effect of steel manufacturing processes on the quality of bearing steels, (ed. J. J. C. Hoo), 81-101; 1988, Philadelphia, PA, ASTM.
19. A.P. Voskamp, R. Österlund, P.C. Becker and O. Vingsbo: Gradual changes in residual stress and microstructure during contact fatigue in ball bearings, Met. Technol. 1980, 14-21.
20. I. A. Polonsky and L. M. Keer: On white etching band formation in rolling bearings, J. Mech. Phys. Solids, 1995, 43, 637-669.
21. H. Swahn, P. C. Becker and O. Vingsbo: Martensite decay during rolling contact fatigue in ball bearings, Metall. Trans. A, 1976, 7A, 1099-1110.
22. T. A. Harris and M. N. Kotzalas: Rolling bearing analysis - essential concepts of bearing technology; 2007, Boca Raton, FL, Taylor & Francis.
23. A. Grabulov, R. Petrov and H. W. Zandbergen: EBSD investigation of the crack initiation and TEM/FIB analyses of the microstructural changes around the cracks formed under rolling contact fatigue (RCF), Int. J. Fatigue, 2010, 32, (3), 576- 583.
24. T. B. Lund: Subsurface initiated rolling contact fatigue - influence of non-metallic inclusions, processing conditions, and operating conditions, J. ASTM Int., 2010, 7, (5), 1-12.
25. K. Sugino, K. Miyamoto, M. Nagumo and K. Aoki: Structural alterations of bearing steels under rolling contact fatigue, ISIJ Int., 1970, 10, 98-111.
26. A. Grabulov: Fundamentals of rolling contact fatigue, PhD thesis, University of Belgrade, Serbia, 2010.
27. P. C. Becker: Microstructural changes around non-metallic inclusions caused by rolling contact fatigue of ball-bearing steels, Met. Technol., 1981, 8, 234-243.
28. K. Hiraoka, M. Nagao and T. Isomoto: Study on flaking process in bearings by white etching area generation, J. ASTM Int., 2006, 3, (5), 1-7.
29. A. Grabulov, U. Ziese and H. W. Zandbergen: TEM/SEM investigation of microstructural changes within the white etching area under rolling contact fatigue and 3-D crack reconstruction by focused ion beam, Scr. Mater.,2007, 57, (7), 635-638.
30. H. Harada, T. Mikami, M. Shibata, D. Sokai, A. Yamamoto and H. Tsubakino: Microstructural changes and crack initiation with white etching area formation under rolling/sliding contact in bearing steel, ISIJ Int., 2005, 45, (12), 1897-1902.
31. D. Scott, B. Loy and G. H. Mills: Metallurgical aspects of rolling contact fatigue, P. I. Mech. Eng., 1966, 181, (315), 94-103.
32. T. Endo, D. Dong, Y. Imai and Y. Yamamoto: Study on rolling contact fatigue in hydrogen atmosphere - improvement of rolling contact fatigue life by formation of surface film, Proc. 31st Leeds--Lyon Tribology Symp.: Life cycle tribology, (ed. D. Dowson et al.), 343-350; 2004, Leeds, Elsevier.
33. R. H. Vegter and J. T. Slycke: The role of hydrogen on rolling contact fatigue response of rolling element bearings, J. ASTM Int., 2009, 7, (2), 1-12.
34. Y. Imai, T. Endo, D. Dong and Y. Yamamoto: Study on rolling contact fatigue in hydrogen environment at a contact pressure below basic static load capacity, Tribol. T., 2010, 53, (5), 764-770.
35. X. D. Peng, Y. Shimizu and N. Mitamura: Long life bearing technologies on material aspect, in Advanced tribology, (ed. J. Luo et al.), 932-933; 2010, Berlin, Heidelberg, Springer.
36. S. Fujita, N. Mitamura and Y. Murakami: Research of new factors affecting rolling contact fatigue life, Proc. World Tribology Congress III, Washington, DC, USA, September 2005, ASME, 1-2.
37. Y. Matsumoto, Y. Murakami and M. Oohori: Rolling contact fatigue under water-infiltrated lubrication, in Bearing steel technology, (ed. J. M. Beswick), 226-243; 2002, West Conshohocken, PA, ASTM International
38. H. Uyama, H. Yamada, H. Hidaka and N. Mitamura: The effects of hydrogen on microstructural change and surface originated flaking in rolling contact fatigue, Tribol. Online, 2011, 6, (2), 123- 132.
39. K. Hiraoka, T. Fujimatsu, N. Tsunekage and A. Yamamoto: Generation process observation of micro-structural change in rolling contact fatigue by hydrogen-charged specimens, Jpn J. Tribol., 2007, 52, (6), 673-683.
40. R. Österlund, O. Vingsbo, L. Vincent and P. Guiraldenq: Butterflies in fatigued ball bearings - formation mechanism and structure, Scand. J. Metall., 1982, 11, 23-32.
41. W. J. Davies and K. L. Day: Surface fatigue in ball bearings, roller bearings, and gears in aircraft engines, Proc. Symp. on Fatigue in rolling contact, London, UK, March 1963, Institution of Mechanical Engineers, 23-40.
42. Y. Murakami, M. Naka, A. Iwamoto and G. Chatell: Long life bearings for automotive alternator applications, Proc. Int. Cong. Exposit., Detroit, MI, USA, February-March 1995, SAE International, 1-14.
43. N. Kino and K. Otani: The influence of hydrogen on rolling contact fatigue life and its improvement, JSAE Rev., 2003, 24, (3), 289-294.
44. K. Tamada and H. Tanaka: Occurrence of brittle flaking on bearings used for automotive electrical instruments and auxiliary devices, Wear, 1996, 199, (2), 245-252.
45. J. A. Martin, S. F. Borgese and A. D. Eberhardt: Microstructural alterations of rolling bearing steels undergoing cyclic stressing, Trans. ASME J. Basic Eng., 1966, 88, 555-567.
46. J. L. OBrien and A. H. King: Electron microscopy of stressinduced structural alterations near inclusions in bearing steels, Trans. ASME J. Basic Eng., 1966, 88, 568-572.
47. J. Buchwald and H. W. Heckel: An analysis of microstructural changes in 52100 steel bearings due to cyclic stressing, Trans. ASM, 1968, 61, 750-756.
48. D. McVittie: Wind turbine gearbox reliability; 2006. Seattle, WA, Gear Engineers, Inc. Available from: www.sandia.gov/wind/2006reliability/tuesday/14-brianmcniff.pdf.
49. A. Muroga and H. Saka: Analysis of rolling contact fatigued microstructure using focused ion beam sputtering and transmission electron microscopy observation, Scr. Metall. Mater., 1995, 33, (1), 151-156.
50. H. W. Walton: The influence of residual stresses on the susceptibility to hydrogen embrittlement in hardened steel components subjected to rolling contact conditions, Proc. SAE Int. Off-Highway Cong., Las Vegas, NV, USA, March 2002, SAE International, 1-6.
51. NSK: Long life bearings for engine accessories, Motion Control, Aug. 2004, 1-10.
52. M. Kohara, T. Kawamura and M. Egami: Study on mechanism of hydrogen generation from lubricants, Tribol. T., 2006, 49, (1), 53-60.
53. T. Kawamura and H. Mikami: Development of NA103A longlife grease for automotive components, NTN Tech. Rev., 2007, 75, 116-123.
54. H. Mikami and T. Kawamura: Influence of electrical current on bearing flaking life, SAE Technical Paper 2007-01-0113, SAE International, Warrendale, PA, USA, 2007.
55. K. Iso, H. Miyajima, K. Denpou, Y. Toda, M. Yamazaki, M. Naka and Y. Fujita: Rolling bearing, rolling bearing for fuel cell, compressor for fuel cell system and fuel cell system, US Patent 7,265,080 B2, 2007.
56. H. Nakashima: Trends in materials and heat treatments for rolling bearings, NTN Tech. Rev., 2008, 10-17.
57. S. Tanaka and Y. Murakami: Rolling bearing, US Patent 7,435,308 B2, 2008.
58. A. Umeda, T. Shiga and K. Ihata: Rolling bearing incorporated in auxiliary device for internal combustion engine, US Patent 7,618,193 B2, 2009.
59. H. Harada and Y. Ono: Toroidal continuously variable transmission and method for producing torque transmitting member thereof, US Patent 7,488,270 B2, 2009.
60. J. Rosinski and D. Smurthwaite: Troubleshooting wind gearbox problems, Gear Solut., 2010, 8, 22-33.
61. F. Rasmussen, K. Thomsen and T. J. Larsen: The gearbox problem revisited, Risø Fact-Sheet AED-RB-17(en), Risø National Laboratory, Roskilde, DenmarK, 2004. Available from: http://www.windwin.de/images/pdf/riso.pdf.
62. P. J. Tavner, J. Xiang and F. Spinato: Reliability analysis for wind turbines, Wind Energy, 2007, 10, (1), 1-18.
63. T. Hamilton: A more durable wind turbine, Technol. Rev., Dec. 2009.
64. Northern Power Systems: The gearbox problem, Northern Power Systems, Barre, VT, USA, July 2009.
65. J. Broehl: Gearbox performance probe sparks legal fears, Windpower Monthly Mag., Mar. 2010.
66. W. Musial, S. Butterfield and B. McNiff: Improving wind tubine gearbox reliability, Proc. EWEA 2007 Conf., Milan, Italy, 2007, US Department of Commerce, 1-10.
67. S.E. Thor: Proc. 57th IEA Topical Expert Meet., Jyväskylä, Finland, September 2008. http://www.ieawind.org/Task_11/Proceedings/57_Gearboxes.pdf.
68. R.J.K. Wood, A. S. Bahaj, S. R. Turnock, L. Wang and M. Evans: Tribological design constraints of marine renewable energy systems, Phil. Trans. R. Soc. A: Math. Phys. Eng. Sci., 2010, 368, (1929), 4807-4827.
69. E.J. Terrell, W.M. Needelman and J.P. Kyle: Tribological challenges to the system, ASME/STLE Int. Joint Tribology Conf., Memphis, TN, USA, October 2009, ASME/STLE, 26-30.
70. H. Siebert: Wind turbines power up with oil, Lubr. Fluid Power, Sept./Oct. 2006.
71. A. Heege, Y. Radovcic and J. Betran: Fatigue load computation of wind turbine gearboxes by coupled structural, mechanism and aerodynamic analysis, DEWI Mag., Feb. 2006, 61-68.
72. T. Burton, D. Sharpe, N. Jenkins and E. Bossanyi: Wind energy handbook; 2001, New York, John Wiley and Sons.
73. E. Vries: Wind turbine gearboxes and the effort to improve their reliability, Windpower Monthly, Jun. 2010.
74. A. Olver: The mechanism of rolling contact fatigue: an update, P. I. Mech. Eng. J.-J. Eng., 2005, 219, (5), 313-330.
75. With kind permission from Springer Science+Business Media. R.D. Evans, G.L. Doll, C.H. Hager and J.Y. Howe: Influence of steel type on the propensity for tribochemical wear in boundary lubrication with a wind turbine gear oil, Tribol. Lett., 2010, 38, 25-32. Figures 3 and 7 respectively.
76. J. Beswick, A. A. Gabelli, S. Ioannides, J. H. Tripp and A. P. Voskamp: Rolling bearing life models and steel internal cleanliness, in Advances in the production and use of steel with improved internal cleanliness, (ed. J. Mahaney), 12-31; 1999, West Conshohocken, PA, ASTM International.
77. J. A. Eckel, P. C. Glaws, J. O. Wolfe and B. J. Zorc: Clean engineered steels - progress at the end of the twentieth century, in Advances in the production and use of steel with improved internal cleanliness, (ed. J. Mahaney), 1-12; 1999, West Conshohocken, PA, ASTM International.
78. Y. Murakami and S. Beretta: Small defects and inhomogeneities in fatigue strength: experiments, models and statistical implications, Extremes, 1999, 2, (2), 123-147.
79. R. Tricot, J. Monnot and M. Lluansi: How microstructural alterations affect fatigue properties of 52100 steel, Met. Eng. Q., 1972, 12, (2), 39-47.
80. R.S. Hyde: Microstructural changes from contact fatigue, in ASM handbook, Vol. 19, Fatigue and fracture, 1749-1780; 1996, Materials Park, OH, ASM International.
81. F.B. Oswald, E.V. Zaretsky and J.V. Poplawski: Interference-fit life factors for roller bearings, Tribol. T., 2009, 52, (4), 415-426.
82. F.B. Oswald, E.V. Zaretsky and J.V. Poplawski: Interference-fit life factors for ball bearings, Tribol. T., 2010, 54, (1), 1-20.
83. R. D. Evans, G. L. Doll, C. H. Hager and J. Y. Howe: Influence of steel type on the propensity for tribochemical wear in boundary lubrication with a wind turbine gear oil, Tribol. Lett., 2010, 38, (1), 25-32.
84. S. Tanaka, K. Yamamura and M. Oohori: Excellent stainless bearing steel (ES1), Motion Control, 2000, 8, 23-26.
85. J. A. Ciruna and H. J. Szieleit: The effect of hydrogen on the rolling contact fatigue life of AISI 52100 and 440C steel balls, Wear, 1973, 24, 107-118.
86. O. Zwirlein and H. Schlicht: Rolling contact fatigue mechanisms - accelerated testing versus field performance, in Rolling contact fatigue testing of bearing steels, ASTM STP 771, (ed. J. J. C. Hoo), 358-379; 1982, West Conshohocken, PA, ASTM International.
87. A. P. Voskamp: Material response to rolling contact loading, J. Tribol.-T. ASME, 1985, 107, 359-366.
88. A.P. Voskamp: Fatigue and material response in rolling contact, in Bearing steels: into the 21st century, (ed. J. J. C. Hoo et al.), 152-166; 1998, West Conshohocken, PA, ASTM International.
89. R.D. Evans, C.H. Hager and R.D. Logsdon: Friction and wear performance of candidate surface treatments for wind turbine gearbox bearings in high slip contacts, Proc. ASME/STLE 2009 Int. Joint Tribology Conf., Memphis, TN, USA, October 2009, 491-493.
90. R. Gebauer and S. Ruhl: Rolling bearings in wind turbine gearboxes, INA Wälzlager Schaeffler oHG, 2003. Available from: http://www.schaeffler.com/remotemedien/media/_shared_media/library/downl oads/wwg_de_us.pdf.
91. TheEngineer: New coating for cylindrical roller bearings reduces gearbox failures in wind turbine applications, 2009. Available from: http://www.theengineer.co.uk/news/new-coating-for-cylindrical-roller-bea rings-reduces-gearbox-failures-in-wind-turbineapplications/312356.articl e.
92. Schaeffler: Protective materials and coatings for extreme environments, 2010. Available from: http://www.ina.de/content.ina.de/de/press/press-releases/press-details.j sp?id=3358849.
93. J. Tao, T. G. Hughes, H. P. Evans, R. W. Snidle, N. A. Hopkinson, M. Talks and J. M. Starbuck: Elastohydrodynamic lubrication analyses of gear tooth surfaces from micropitting tests, J. Tribol.-T. ASME, 2003, 125, 267-274.
94. A. P. Voskamp and E. J. Mittemeijer: State of residual stress induced by cyclic rolling contact loading, Mater. Sci. Technol., 1997, 13, (5), 430-438.
95. F. Sadeghi, B. Jalalahmadi, T. S. Slack, N. Raje and N.K. Arakere: A review of rolling contact fatigue, J. Tribol.-T. ASME, 2009, 131, (4), 1-15.
96. G. Lundberg and A. Palmgrem: Dynamic capacity of rolling bearings, Acta Polytech. Scand. Mech. Eng. Ser., 1947, 3, 5-50.
97. R.L. Widner: Failures of rolling element bearings: failure analysis and prevention, in Metals handbook, 9th edn; 1986, Materials Park, OH, ASM International.
98. N. Tsushima: Crack propagation of rolling contact fatigue in ball bearing steel due to tensile strain, NTN Tech. Rev., 2007, 128- 139.
99. Reprinted from A. Grabulov, R. Petrov, and H.W. Zandbergen: EBSD investigation of the crack initiation and TEM/FIB analyses of the microstructural changes around the cracks formed under rolling contact fatigue (RCF), Int. J. Fatigue, 2010, 32, 576-583 with permission from Elsevier.
100. K. Furumura, Y. Murakami and T. Abe: Development of long life bearing steel for full film lubrication and for poor and contaminated lubrication, Motion Control, 1996, 1, 30-36.
101. A. Kerrigan, J. C. Kuijpers, A. Gabelli and E. Ioannides: Cleanliness of bearing steels and fatigue life of rolling contacts, in Bearing steel technology - advances and state of the art in bearing steel quality assurance, (ed. J. M. Beswick), 101-106; 2006, West Conshohocken, PA, ASTM International.
102. A. Stiénon, A. Fazekas, J. Y. Buffière, A. Vincent, P. Daguier and F. Merchi: A new methodology based on X-ray microtomography to estimate stress concentrations around inclusions in high strength steels, Mater. Sci. Eng. A, 2009, A513-A514, 376-383.
103. K. Hashimoto, T. Fujimatsu, N. Tsunekage, K. Hiraoka, K. Kida and E. C. Santos: Study of rolling contact fatigue of bearing steels in relation to various oxide inclusions, Mater. Des., 2011, 32, (3), 1605-1611.
104. K. Hashimoto, T. Fujimatsu, N. Tsunekage, K. Hiraoka, K. Kida and E. C. Santos: Effect of inclusion/matrix interface cavities on internal-fracture-type rolling contact fatigue life, Mater. Des., 2011, 32, (10), 4980-4985.
105. D. Brooksbank and K. W. Andrews: Stress fields around inclusions and their relation to mechanical properties, J. Iron Steel Inst. (Lond.), 1971, 210, 246-255.
106. D. Ray, L. Vincent, B. Coquillet and P. Guirandenq: Hydrogen embrittlement of a stainless ball bearing steel, Wear, 1980, 65, 103-111.
107. A. Vincent, G. Lormand, P. Lamagnère, L. Gosset, D. Girodin, G. Dudragne and R. Fougères: From white etching areas formed around inclusions to crack nucleation in bearing steels under rolling contact fatigue, in Bearing steels: into the 21st century, (ed. J. J. C. Hoo et al.), 109-123; 1998, West Conshohocken, PA, ASTM International.
108. H. Mayer, W. Haydn, R. Schuller, S. Issler and M. Bacher- Höchst: Very high cycle fatigue properties of bainitic high carbon-chromium steel under variable amplitude conditions, Int. J. Fatigue, 2009, 31, (8-9), 1300-1308.
109. R. F. Johnson and J. R. Blank: Fatigue in rolling contact: some metallurgical aspects, P. I. Mech. Eng., 1963, 95-102.
110. M. Brückner, J. Gegner, A. Grabulov, W. Nierlich and J. Slycke: Alternative butterfly formation mechanisms in rolling contact fatigue, Proc. 5th Int. Conf. on Very high cycle fatigue, Berlin, Germany, June 2011, 138-151.
111. O. Umezawa and K. Nagai: Effects of test temperature on internal fatigue crack generation associated with nonmetallic particles in austenitic steels, Metall. Mater. Trans. A, 1998, 29A, 3017-3028.
112. A.H. King and J.L. OBrien: Microstructural alterations in rolling contact fatigue, Proc. 68th ASTM Annual Meeting on Advances in electron metallography, Vol. 6, Lafayette, IN, USA, June 1965, ASTM International, 74-88.
113. K. Böhm, H. Schlicht, O. Zwirlein and R. Eberhard: Nonmetallic inclusions and rolling contact fatigue, Proc. ASTM May Committee Week on Bearing steels: the rating of nonmetallic inclusions, Boston, MA, USA, May 1974, ASTM, 96-113.
114. K. Hono, M. Ohnuma, M. Murayama, S. Nishida, A. Yoshie and T. Takahashi: Cementite decomposition in heavily drawn pearlite steel wire, Scr. Mater., 2001, 44, 977-983.
115. Reprinted with permission from the J. ASTM Int., 3, (5). copyright ASTM International, 100 Barr Harbour Drive, West Conshocken, PA 19428.
116. By MATTER, Havovy Cama, released under CC BY-NC-ND 2.0 license. http://core.materials.ac.uk/search/detail.php?id=2626.
117. T. Sakai, B. Lian, M. Takeda, K. Shiozawa, N. Oguma, Y. Ochi, M. Nakajima and T. Nakamura: Statistical duplex S-N characteristics of high carbon chromium bearing steel in rotating bending in very high cycle regime, Int. J. Fatigue, 2010, 32, (3), 497-504.
118. M. Shibata: Trends of studies on rolling contact fatigue life and recent results, Koyo Eng. J. (English Edition), 2004, 8-13.
119. C. Först, J. Slycke, K. van Vliet and S. Yip: Point defect concentrations in metastable Fe-C alloys, Phys. Rev. Lett., 2006, 96, (17), 175501.
120. Y. Ivanisenko, W. Lojkowski, R. Z. Valiev and H.-J. Fecht: The mechanism of formation of nanostructure and dissolution of cementite in a pearlitic steel during high pressure torsion, Acta Mater., 2003, 51, (18), 5555-5570.
121. Y. Todaka, M. Umemoto, A. Ohno, M. Suzuki, Y. Kawabata and K. Tsuchiya: Dissolution of cementite in carbon steels by ball drop deformation and laser heating, J. Alloys Compd, 2007, 434- 435, 497-500.
122. S. Ohsaki, K. Hono, H. Hidaka and S. Takaki: Characterization of nanocrystalline ferrite produced by mechanical milling of pearlitic steel, Scr. Mater., 2005, 52, (4), 271-276.
123. Y. Xu, Z. G. Liu, M. Umemoto and K. Tsuchiya: Formation and annealing behavior of nanocrystalline ferrite in Fe-0.89C spheroidite steel produced by ball milling, Metall. Mater. Trans. A, 2002, 33A, 2195-2203.
124. N. Min, W. Li, H. Li and X. Jin: Atom probe and mossbauer spectroscopy investigations of cementite dissolution in a cold drawn eutectoid steel, J. Mater. Sci. Technol., 2010, 26, (9), 776- 782.
125. V. Gavriljuk: Comment on cementite decomposition in heavily drawn pearlite steel wire, Scr. Mater., 2002, 46, 175-177.
126. A. Taniyama, T. Takayama, M. Arai and T. Hamada: Structure analysis of ferrite in deformed pearlitic steel by means of X-ray diffraction method with synchrotron radiation, Scr. Mater., 2004, 51, (1), 53-58.
127. X. Sauvage, A. Chbihi and X. Quelennec: Severe plastic deformation and phase transformations, J. Phys.: Conf. Ser., 2010, 240, 1-8. 128. J. Ćwiek: Hydrogen degradation of high-strength steels, J. Achiev. Mater. Manuf. Eng., 2009, 37, 193-212.
128. L. Grunberg: The formation of hydrogen peroxide on fresh metal surfaces, Proc. Phys. Soc. Lond. Sect. B, 1953, 66, 153-161.
129. T. Imran, B. Jacobson and A. Shariff: Quantifying diffused hydrogen in AISI-52100 bearing steel and in silver steel under tribo-mechanical action: Pure rotating bending, sliding-rotating bending, rolling-rotating bending and uni-axial tensile loading, Wear, 2006, 261, 86-95.
130. L. Grunberg, D. T. Jamieson and D. Scott: Hydrogen penetration in water-accelerated fatigue of rolling surfaces, Philos. Mag., 1963, 8, (93), 1553-1568.
131. Y. Matsubara and H. Hamada: A novel method to evaluate the influence of hydrogen on fatigue properties of high strength steels, J. ASTM Int., 2006, 3, (2), 1-14.
132. L. Hong, L. Midan, Z. Tiancheng and C. Wuyang: Hydrogenenhanced dislocation emission, motion and nucleation of hydrogen-induced cracking for steel, Sci. China Ser. E, 1997, 40E, (5), 530-538.
133. S. Fujita, S. Matsuoka, Y. Murakami and G. Marquis: Effect of hydrogen on mode II fatigue crack behavior of tempered bearing steel and microstructural changes, Int. J. Fatigue, 2010, 32, (6), 943-951.
134. Y. Murakami and H. Matsunaga: The effect of hydrogen on fatigue properties of steels used for fuel cell system, Int. J. Fatigue, 2006, 28, (11), 1509-1520.
135. Y. Murakami, T. Kanezaki, Y. Mine and S. Matsuoka: Hydrogen embrittlement mechanism in fatigue of austenitic stainless steels, Metall. Mater. Trans. A, 2008, 39A, (6), 1327- 1339.
136. P. Ruo and A. V. Olver: Hydrogen in lubricated contact, 1st International Conference - Artificial Intelligence for Industrial Applications, Ostravice, CZ, 19-23 February, 2007, European Marie Curie, 1-7.
137. M. Nagumo, H. Uyama and M. Yoshizawa: Accelerated failure in high strength steel by alternating hydrogen-charging potential, Scr. Mater., 2001, 44, 947-952.
138. D. Scott and H. M. Scott: The application of electron microscopy to the study of pitting failure of rolling bearings, European Regional Conference on Electron Microscopy, Delft, The Netherlands, August-September 1960, 539-542.
139. C. D. Beachem: A new model for hydrogen-assisted cracking (hydrogen embrittlement), Metall. Trans. B, 1972, 3B, (2), 437- 451.
140. H. W. Walton: Ubiquitous hydrogen, in Heat treating: including steel heat treating in the new millennium, (ed. S. J. Midea and G. D. Pfaffmann), 558-563; 1999, Materials Park, OH, ASM International.
141. M. Nagumo, K. Takai and N. Okuda: Nature of hydrogen trapping sites in steels induced by plastic deformation, J. Alloys Compd, 1999, 293-295, 310-316.
142. D. Park, I. S. Maroef, A. Landau and D. L. Olson: Retained austenite as a hydrogen trap in steel welds, Weld. J., 2002, 27-35.
143. 3 precipitation in Fe-C-Mo-V steels and relationship to hydrogen trapping, Proc. R. Soc. Lond. Ser. A, 2006, 462, (2072), 2315-2330.
144. T. Otsuka, H. Hanada, H. Nakashima, K. Sakamoto, M. Hayakawa, K. Hashizume and M. Sugisaki: Observation of hydrogen distribution around non-metallic inclusions in steels with tritium microautoradiography, Fusion Sci. Technol., 2005, 48, (1), 708-711.
145. M. Nagumo, M. Nakamura and K. Takai: Hydrogen thermal desorption relevent to delayed-fracture susceptibility of highstrength steels, Metall. Mater. Trans. A, 2001, 32A, 339-347.
146. M. Nagumo: Hydrogen related failure of steels - a new aspect, Mater. Sci. Technol., 2004, 20, 940-950.
147. K. Takai, H. Shoda, H. Suzuki and M. Nagumo: Lattice defects dominating hydrogen-related failure of metals, Acta Mater., 2008, 56, (18), 5158-5167.
148. Copyright (2005) by the American Nuclear Society, La Grange Park, IL, USA. T. Otsuka, H. Hanada, H. Nakashima, K. Sakamoto, M. Hayakawa, K. Hashizume and M. Sugisaki: Fusion Sci. Technol., 2005, 48, (1), 708-711.
149. R. A. Oriani: Hydrogen - the versatile embrittler, Corrosion, 1987, 43, (7), 390-397.
150. H. K. Birnbaum and P. Sofronis: Hydrogen-enhanced localized plasticity - a mechanism for hydrogen related failure, Mater. Sci. Eng. A, 1994, A176, (1-2), 191-202.
151. A. Barnoush and H. Vehoff: Recent developments in the study of hydrogen embrittlement: Hydrogen effect on dislocation nucleation, Acta Mater., 2010, 58, (16), 5274-5285.
152. V. G. Gavriljuk, V. N. Bugaev, Y. N. Petrov, A. V. Tarasenko and B. Z. Yanchitski: Hydrogen-induced equilibrium vacancies in fcc iron-base alloys, Scr. Mater., 1996, 34, (6), 903-907.
153. R. B. McLellan and Z. R. Xu: Hydrogen-induced vacancies in the iron lattice, Scr. Mater., 1997, 36, (10), 1201-1205.
154. Y. Tateyama and T. Ohno: Stability and clusterization of hydrogen-vacancy complexes in α-Fe: an ab initio study, Phys. Rev. B: Condens. Matter, 2003, 67, (17), 174105.
155. M. Reichelt, T. E. Weirich, J. Mayer, T. Wolf, J. Loos, P. W. Gold and M. Fajfrowski: TEM and nanomechanical studies on tribological surface modifications formed on roller bearings under controlled lubrication conditions, J. Mater. Sci., 2006, 41, (14), 4543-4553.
156. S. M. Hsu and R. S. Gates: Effect of materials on tribochemical reactions between hydrocarbons and surfaces, J. Phys. D: Appl. Phys., 2006, 39, (15), 3128-3137.
157. T. Sakamoto, H. Uetz, J. Föhl and M. A. Khosrawi: The reaction layer formed on steel by additives based on sulphur and phosphorus compounds under conditions of boundary lubrication, Wear, 1982, 77, 139-157.
158. G. T. Y. Wan, H. Lankamp, A. D. Vries and E. Ioannides: The effect of extreme pressure (EP) lubricants on the life of rolling element bearings, P. I. Mech. Eng. J.-J. Eng., 1994, 208, 247-252.
159. J. Fitch: How water causes bearing failure, Mach. Lubr. Mag., Jul. 2008. Available from: http://www.machinerylubrication.com/Read/1367/water-bearing-failure.
160. L. J. Taylor and H. A. Spikes: Friction-enhancing properties of ZDDP antiwear additive: Part I - friction and morphology of ZDDP reaction films, Tribol. T., 2003, 46, (3), 303-309.
161. A. Thompson and I. M. Bernstein: The role of metallurgical variables in hydrogen-assisted environmental fracture, in Advances in corrosion science and technology, (ed. M. G. Fontana et al.), 53-175; 1980, New York, Plenum Press.
162. P. Schatzberg: Inhibition of water-accelerated rolling-contact fatigue, J. Lubr. Technol.-T. ASME, 1971, 70, 231-233.
163. P. J. L. Fernandes and C. McDuling: Surface contact fatigue failures in gears, Eng. Fail. Anal., 1997, 4, (2), 99-107.
164. Y.S. Kang, R.D. Evans and G.L. Doll: Roller-raceway slip simulations of wind turbine gearbox bearings using dynamic bearing model, Proc. STLE/ASME 2010 Int. Joint Tribology Conf., San Francisco, CA, USA, October 2010, ASME, 407-409.
165. P. Johansson, S. Bengtsson and S. Dizdar: RCF-testing of selectively densified rollers of p/m materials for gear applications, Adv. Powder Metall. Particul. Mater.s, 2002, (Part 5), 180-192.
166. J. Lord and R. Larsson: Effects of slide-roll ratio and lubricant properties on elastohydrodynamic lubrication film thickness and traction, P. I. Mech. Eng. J.-J. Eng., 2001, 215, 301-308.
167. D. M. Nuruzzaman and M. A. A. Sheikh: EHL oil film thickness under rolling-sliding contact, J. Mech. Eng., 2007, 38, 58-60.