Microstructural consequences of nanosilica addition on aerial lime binding materials: Influence of different drying conditions

Materials Characterization

Volumn 80, Issue , 2013, Pages 36-49

  Alvarez, J I ^a   Fernandez J M ^a   Navarro Blasco, I ^a   Duran, A ^a   Sirera, R ^a  

^a UNIVERSITY OF NAVARRA   (Spain)

Author keywords

Compressive strength; Mesopore; Nanosilica; Pore size distribution; SEM; TEM

Indexed keywords

COMPARATIVE STUDIES; FREEZE DRYING METHOD; MECHANICAL BEHAVIOR; MESOPORE; MICROSTRUCTURAL MODIFICATION; NANO-SILICA; NANOSIZED MATERIALS; STRUCTURE EVALUATIONS;

COMPRESSIVE STRENGTH; DRYING; LIME; MICROPOROSITY; OVENS; PORE SIZE; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY;

MATERIALS;

EID: 84876551943     PISSN: 10445803     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matchar.2013.03.006     Document Type: Article

References (48)

1. A. Arizzi, H. Viles, and G. Cultrone Experimental testing of the durability of lime-based mortars used for rendering historic buildings Constr Build Mater 28 2012 807 818
2. G. Margalha, R. Veiga, A. Santos Silva, and J. de Brito Traditional methods of mortar preparation: the hot lime mix method Cem Concr Compos 33 2011 796 804
3. H. Paiva, A. Velosa, R. Veiga, and V.M. Ferreira Effect of maturation time on the fresh and hardened properties of an air lime mortar Cem Concr Res 40 2010 447 451
4. A. Izaguirre, J. Lanas, and J.I. Álvarez Behaviour of a starch as a viscosity modifier for aerial lime-based mortars Carbohydr Polym 80 2010 222 228
5. 2 mortars Appl Catal Environ 95 2010 78 86
6. A. Izaguirre, J. Lanas, and J.I. Álvarez Effect of water-repellent admixtures on the behaviour of aerial lime-based mortars Cem Concr Res 39 2009 1095 1104
7. A. Izaguirre, J. Lanas, and J.I. Álvarez Characterization of aerial lime-based mortars modified by the addition of two different water-retaining agents Cem Concr Compos 33 2011 309 318
8. A. El-Turki, R.J. Ball, S. Holmes, W.J. Allen, and G.C. Allen Environmental cycling and laboratory testing to evaluate the significance of moisture control for lime mortars Constr Build Mater 24 2010 1392 1397
9. A. Arizzi, and G. Cultrone Aerial lime-based mortars blended with a pozzolanic additive and different admixtures: a mineralogical, textural and physical-mechanical study Constr Build Mater 31 2012 135 143
10. G. Wei, H. Zhang, H. Wang, S. Fang, B. Zhang, and F. Yang An experimental study on application of sticky rice-lime mortar in conservation of the stone tower in the Xiangji Temple Constr Build Mater 28 2012 624 632
11. L. Ventolà, M. Vendrell, P. Giraldez, and L. Merino Traditional organic additives improve lime mortars: new old materials for restoration and building natural stone fabrics Constr Build Mater 25 2011 3313 3318
12. M.P. Seabra, H. Paiva, J.A. Labrincha, and V.M. Ferreira Admixtures effect on fresh state properties of aerial lime based mortars Constr Build Mater 23 2009 1147 1153
13. E. Aggelakopoulou, A. Bakolas, and A. Moropoulou Properties of lime-metakaolin mortars for the restoration of historic masonries Appl Clay Sci 53 2011 15 19
14. 1H NMR to hydration and porosity studies of lime-pozzolan mixtures Microporous Mesoporous Mater 139 2011 16 24
15. A. Gameiro, A. Santos Silva, R. Veiga, and A. Velosa Hydration products of lime-metakaolin pastes at ambient temperature with ageing Thermochim Acta 535 2012 36 41
16. E. Vejmelková, M. Keppert, P. Rovnaníková, Z. Keršner, and R. Černý Application of burnt clay shale as pozzolan addition to lime mortar Cem Concr Compos 34 2012 486 492
17. A. Sepulcre-Aguilar, and F. Hernández-Olivares Assessment of phase formation in lime-based mortars with added metakaolin, Portland cement and sepiolite, for grouting of historic masonry Cem Concr Res 40 2010 66 76
18. C. Fortes-Revilla, S. Martínez-Ramírez, and M.T. Blanco-Varela Modelling of slaked lime-metakaolin mortar engineering characteristics in terms of process variables Cem Concr Compos 28 2006 458 467
19. N. Billong, U.C. Melo, D. Njopwouo, F. Louvet, and J.P. Bonnet Effect of mixture constituents on properties of slaked lime-metakaolin-sand mortars containing sodium hydroxide Cem Concr Compos 31 2009 658 662
20. J. Lanas, and J.I. Alvarez-Galindo Masonry repair lime-based mortars: factors affecting the mechanical behavior Cem Concr Res 33 2003 1867 1876
21. J.-Y. Shih, T.-P. Chang, and T.-C. Hsiao Effect of nanosilica on characterization of Portland cement composite Mater Sci Eng A-Struct 424 2006 266 274
22. G. Quercia, G. Hüsken, and H.J.H. Brouwers Water demand of amorphous nano silica and its impact on the workability of cement paste Cem Concr Res 42 2012 344 357
23. M.-H. Zhang, and J. Islam Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag Constr Build Mater 29 2012 573 580
24. F. Kontoleontos, P.E. Tsakiridis, A. Marinos, V. Kaloidas, and M. Katsioti Influence of colloidal nanosilica on ultrafine cement hydration: physicochemical and microstructural characterization Constr Build Mater 35 2012 347 360
25. P. Hou, S. Kawashima, K. Wang, D.J. Corr, J. Qian, and S.P. Shah Effects of colloidal nanosilica on rheological and mechanical properties of fly ash-cement mortar Cem Concr Compos 35 2013 12 22 10.1016/j.cemconcomp.2012.08. 027
26. J. Björnström, A. Martinelli, A. Matic, L. Börjesson, and I. Panas Accelerating effects of colloidal nano-silica for beneficial calcium-silicate-hydrate formation in cement Chem Phys Lett 392 2004 242 248
27. M. Berra, F. Carassiti, T. Mangialardi, A.E. Paolini, and M. Sebastiani Effects of nanosilica addition on workability and compressive strength of Portland cement pastes Constr Build Mater 35 2012 666 675
28. J.M. Fernández, A. Durán, I. Navarro-Blasco, J. Lanas, R. Sirera, and J.I. Alvarez Influence of nanosilica and a polycarboxylate ether superplasticizer on the performance of lime mortars Cem Concr Res 43 2013 12 24
29. R.M. Espinosa, and L. Frank Influence of the age and drying process on pore structure and sorption isotherms of hardened cement paste Cem Concr Res 36 2006 1969 1984 (Pubitemid 44572177)
30. M. Stefanidou Methods for porosity measurement in lime-based mortars Constr Build Mater 24 2010 2572 2578
31. M. Arandigoyen, and J.I. Alvarez Blended pastes of cement and lime: pore structure and capillary porosity Appl Surf Sci 252 2006 8077 8085 (Pubitemid 44311237)
32. M. Arandigoyen, B. Bicer-Simsir, J.I. Alvarez, and D.A. Lange Variation of microstructure with carbonation in lime and blended pastes Appl Surf Sci 252 2006 7562 7571 (Pubitemid 44233926)
33. J. Zhang, and G.W. Scherer Comparison of methods for arresting hydration of cement Cem Concr Res 41 2011 1024 1036
34. N.C. Collier, J.H. Sharp, N.B. Milestone, J. Hill, and I.H. Godfrey The influence of water removal techniques on the composition and microstructure of hardened cement pastes Cem Concr Res 38 2008 737 744 (Pubitemid 351635791)
35. L. Konecny, and S.J. Naqvi The effect of different drying techniques on the pore size distribution of blended cement mortars Cem Concr Res 23 1993 1223 1228 (Pubitemid 23715473)
36. C. Gallé Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: a comparative study between oven-, vacuum-, and freeze-drying Cem Concr Res 31 2001 1467 1477 (Pubitemid 32935080)
37. A. Korpa, and R. Trettin The influence of different drying methods on cement paste microstructures as reflected by gas adsorption: comparison between freeze-drying (F-drying), D-drying, P-drying and oven-drying methods Cem Concr Res 36 2006 634 649
38. M. Arandigoyen, J.L. Pérez Bernal, M.A. Bello López, and J.I. Alvarez Lime-pastes with different kneading water: pore structure and capillary porosity Appl Surf Sci 252 2005 1449 1459 (Pubitemid 41668399)
39. R.M. Lawrence, T.J. Mays, S.P. Rigby, P. Walker, and D. D'Ayala Effects of carbonation on the pore structure of non-hydraulic lime mortars Cem Concr Res 37 2007 1059 1069 (Pubitemid 46961946)
40. P. Pipilikaki, and M. Beazi-Katsioti The assessment of porosity and pore size distribution of limestone Portland cement pastes Constr Build Mater 23 2009 1966 1970
41. N. De Belie, J. Kratky, and S. Van Vlierberghe Influence of pozzolans and slag on the microstructure of partially carbonated cement paste by means of water vapour and nitrogen sorption experiments and BET calculations Cem Concr Res 40 2010 1723 1733
42. J. Dweck, P.M. Buchler, A.C. Vieira-Coelho, and F.K. Cartledge Hydration of a Portland cement blended with calcium carbonate Thermochim Acta 346 2000 105 113
43. A. Duran, L.A. Perez-Maqueda, J. Poyato, and J.L. Perez-Rodriguez A thermal study approach to roman age wall painting mortars J Therm Anal Calorim 99 2010 803 809
44. C.A. García-González, N. el Grouh, A. Hidalgo, J. Fraile, A.M. López-Periago, and C. Andrade New insights on the use of supercritical carbon dioxide for the accelerated carbonation of cement pastes J Supercrit Fluids 43 2008 500 509 (Pubitemid 47588835)
45. S. Goñi, M. Frias, I. Vegas, R. García, and R. Vigil de la Villa Quantitative correlations among textural characteristics of CSH gel and mechanical properties: case of ternary Portland cements containing activated paper sludge and fly ash Cem Concr Compos 34 2012 911 916
46. 4 addition on the microstructural development of calcium aluminate cement Cem Concr Res 40 2010 1555 1570
47. S. Kawashima, P. Hou, D.J. Corr, and S.P. Shah Modification of cement-based materials with nanoparticles Cem Concr Compos 36 2013 8 15 10.1016/j.cemconcomp. 2012.06.01
48. O. Cizer, C. Rodriguez-Navarro, E. Ruiz-Agudo, J. Elsen, D. Van Gemert, and K. Van Balen Phase and morphology evolution of calcium carbonate precipitated by carbonation of hydrated lime J Mater Sci 47 2012 6151 6165