Metallic Particle-Filled Polymer Microcomposites

Polymer Composites

Volumn 1, Issue , 2012, Pages 575-612

  Garnier, Bertrand ^a   Agoudjil, Boudjemaa ^b   Boudenne, Abderrahim ^c  

^a UNIVERSITÉ DE NANTES   (France)

^b UNIVERSITY OF BATNA   (Algeria)

^c UNIVERSITÉ PARIS EST CRÉTEIL   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84876287424     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527645213.ch19     Document Type: Chapter

References (121)

1. Utracki, L.A. and Vu Khanh, T. (2002) Filled polymers, in Multicomponent Polymer Systems, Longman Scientific & Technical, London, pp. 207-268.
2. Sussman, V. (1987) Conductive fillers, in Handbook of Fillers for Plastics, Springer.
3. German, R.M. (1984) Powder Metallurgy Science, Metal Powder Industries Federation.
4. Bigg, D.M. (1979) Mechanical, thermal, and electrical properties of metal fiber-filled polymer composites. Polymer Engineering & Science, 19, 1188-1192.
5. Boudenne, A., Ibos, L., Fois, M., Majesté, J.C., and Géhin, E. (2005) Electrical and thermal behavior of polypropylene filled with copper particles. Composites Part A, 36, 1545-1554.
6. Danes, F., Garnier, B., and Dupuis, T. (2003) Predicting, measuring, and tailoring the transverse thermal conductivity of composites from polymer matrix and metal filler. International Journal of Thermophysics, 24, 771-784.
7. Novák, I., Krupa, I., and Chodák, I. (2004) Electroconductive adhesives based on epoxy and polyurethane resins filled with silver-coated inorganic fillers. Synthetic Metals, 144, 13-19.
8. Luyt, A.S., Molefi, J.A., and Krump, H. (2006) Thermal, mechanical and electrical properties of copper powder filled low-density and linear low-density polyethylene composites. Polymer Degradation and Stability, 91, 1629-1636.
9. Mamunya, Y.P., Davydenko, V.V., Pissis, P., and Lebedev, E.V. (2002) Electrical and thermal conductivity of polymers filled with metal powders. European Polymer Journal, 38, 1887-1897.
10. Ishigure, Y., Iijima, S., Ito, H., Ota, T., Unuma, H., Takahashi, M., Hikichi, Y., and Suzuki, H. (1999) Electrical and elastic properties of conductor-polymer composites. Journal of Materials Science, 34, 2979-2985.
11. Dupuis, T. (2002) PhD thesis Ecole Polytechnique, University of Nantes.
12. Bigg, D.M. and Bradbury, E.J. (1981) Conductive polymeric composites from short conductive fibers. Polymer Science and Technology, 15, 23-38.
13. Agari, Y. and Uno, T. (1986) Estimation on thermal conductivities of filled polymers. Journal of Applied Polymer Science, 32, 5705-5712.
14. Bishay, I.K., Abd-El-Messieh, S.L., and Mansour, S.H. (2011) Electrical, mechanical and thermal properties of polyvinyl chloride composites filled with aluminum powder. Materials & Design, 32, 62-68.
15. Kusy, R.P. and Corneliussen, R.D. (1975) The thermal conductivity of nickel and copper dispersed in poly(vinyl chloride). Polymer Engineering & Science, 15, 107-112.
16. Malliaris, A. and Turner, D.T. (1971) Influence of particle size on the electrical resistivity of compacted mixtures of polymeric and metallic powders. Journal of Applied Physics, 42, 614-618.
17. Boudenne, A., Ibos, L., Fois, M., Gehin, E., and Majesté, J.-C. (2004) Thermophysical Properties of Polypropylene/Aluminum Composites, vol. 42, John Wiley & Sons, Inc., New York.
18. Nakamura, S., Tommura, T., and Sawa, G. (1998) Electrical conduction mechanism of polymer-carbon black composites below and above the percolation threshold. Presented at Annual Report Conference on Electrical Insulation and Dielectric Phenomena, Atlanta, GA.
19. Roldughin, V.I. and Vysotskii, V.V. (2000) Percolation properties of metal-filled polymer films, structure and mechanisms of conductivity. Progress in Organic Coatings, 39, 81-100.
20. Cecen, V., Boudenne, A., Ibos, L., Novak, I., Nogellova, Z., Prokes, J., and Krupa, I. (2008) Electrical,Mechanical and Adhesive Properties of Ethylene-Vinylacetate Copolymer (EVA) Filled with Wollastonite Fibers Coated by Silver, vol. 44, Elsevier, Kidlington, UK.
21. Agoudjil, B., Ibos, L., Majesté, J.C., Candau, Y., and Mamunya, Y.P. (2008) Correlation between transport properties of ethylene vinyl acetate/glass, silvercoated glass spheres composites. Composites Part A, 39, 342-351.
22. Krupa, I., Mikova, G., Novak, I., Janigova, I., Nogellova, Z., Lednicky, F., and Prokes, J. (2007) Electrically Conductive Composites of Polyethylene Filled with Polyamide Particles Coated with Silver, vol. 43, Elsevier, Kidlington,UK.
23. Bigg, D.M. (1986) Thermally conductive polymer compositions. Polymer Composites, 7, 125-140.
24. Tekce, H.S., Kumlutas, D., and Tavman, I.H. (2007) Effect of Particle Shape on Thermal Conductivity of Copper Reinforced Polymer Composites, vol. 26, Sage, London.
25. Tavman, I.H. (1996) Thermal and mechanical properties of aluminum powder-filled high-density polyethylene composites. Journal of Applied Polymer Science, 62, 2161-2167.
26. Tavman, I.H. (1997) Thermal and mechanical properties of copper powder filled poly(ethylene) composites. Powder Technology, 91, 63-67.
27. Molefi, J., Luyt, A., and Krupa, I. (2009) Comparison of the influence of Cu micro- and nano-particles on the thermal properties of polyethylene/Cu composites, eXPRESS Polymer Letters, 3, 639-649.
28. Sofian, N.M., Rusu, M., Neagu, R., and Neagu, E. (2001) Metal powder-filled polyethylene composites. V. Thermal properties. Journal of Thermoplastic Composite Materials, 14, 20-33.
29. Kumlutas, D. and Tavman, I.H. (2006) A numerical and experimental study on thermal conductivity of particle filled polymer composites. Journal of Thermoplastic Composite Materials, 19, 441-455.
30. Maiti, S.N. and Mahapatro, P.K. (1990) Thermal properties of nickel powder filled polypropylene composites. Polymer Composites, 11, 223-228.
31. Weidenfeller, B., Hofer, M., and Schilling, F.R. (2004) Thermal Conductivity, Thermal Diffusivity, and Specific Heat Capacity of Particle Filled Polypropylene, vol. 35, Elsevier, Kidlington, UK.
32. Tlili, R., Cecen, V., Krupa, I., Boudenne, A., Ibos, L., Candau, Y., and Novak, I. (2011) Mechanical and thermophysical properties of EVA copolymer filled with nickel particles. Polymer Composites, 32, 727-736.
33. De Araujo, F.F.T., Garrett, K.W., and Rosenberg, H.M. (1976) Presented at ICCM Proceedings of the International Conference on Composite Materials. vol. 2, p. 568.
34. Nieberlein, V. (1978) Thermal conductivity enhancement of epoxies by the use of fillers. IEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1, 172-176.
35. Katz, H.S. and Milewski, J.V. (1978) Handbook of Fillers and Reinforcements for Plastics, Van Nostrand Reinhold Company.
36. Chung, S.I., Im, Y.G., Jeong, H.D., and Nakagawa, T. (2003) The effects of metal filler on the characteristics of casting resin for semi-metallic soft tools. Journal of Materials Processing Technology, 134, 26-34.
37. De-Araujo, F.F.T. and Rosenberg, H.M. (1976) The thermal conductivity of epoxy-resin/metal-powder composite materials from 1.7 to 300K. Journal of Physics D, 9, 665-675.
38. Hansen, D. and Tomkiewicz, R. (1975) Heat conduction in metal-filled polymers: the role of particle size, shape, and orientation. Polymer Engineering and Science, 15, 353-356.
39. Hamilton, R.L. and Crosser, O.K. (1962) Thermal conductivity of heterogeneous two-component systems. Industrial & Engineering Chemistry Fundamentals, 1, 187-191.
40. Filip, C.,Garnier, B., and Danes, F. (2007) Effective Conductivity of a Composite in a Primitive Tetragonal Lattice of Highly Conducting Spheres in Resistive Thermal Contact with the IsolatingMatrix, vol. 129, American Society of Mechanical Engineers, New York, NY.
41. Danes, F., Garnier, B., Dupuis, T., Lerendu, P., and Nguyen, T.P. (2005) Non-uniformity of the filler concentration and of the transverse thermal and electrical conductivities of filled polymer plates. Composites Science and Technology, 65, 945-951.
42. Boutros, A., Garnier, B., Danes, F., Boudenne, A., Ibos, L., and Agoudjil, B. (2008) Effective thermal conductivity of composites with a polymer matrix in imperfect contact with embedded hollow metallic spheres. Presented at 18th European Conference on Thermophysical Properties, Pau, France.
43. Krupa, I., Cecen, V., Tlili, R., Boudenne, A., and Ibos, L. (2008) Thermophysical properties of ethylene-vinyl acetate copolymer (EVA) filled with wollastonite fibers coated by silver. European Polymer Journal, 44, 3817-3826.
44. Krupa, I., Boudenne, A., and Ibos, L. (2007) Thermophysical properties of polyethylene filled with metal coated polyamide particles. European Polymer Journal, 43, 2443-2452.
45. Gungor, A. (2006) The physical and mechanical properties of polymer composites filled with Fe-powder. Journal of Applied Polymer Science, 99, 2438-2442.
46. Rusu, M., Sofian, N., and Rusu, D. (2001) Mechanical and thermal properties of zinc powder filled high density polyethylene composites. Polymer Testing, 20, 409-417.
47. Mansour, S.H., Gomaa, E., and Bishay, I.K. (2007) Effect of metal type and content on mechanical, electrical and free-volume properties of styrenated polyesters. Journal of Materials Science, 42, 8473-8480.
48. Tan, S.T., Zhang, M.Q., Rong, M.Z., and Zeng, H.M. (1999) Effect of interfacial modification on metal fiber filled polypropylene composites and property balance. Polymer Composites, 20, 406-412.
49. Martin, M., Hanagud, S., and Thadhani, N.N. (2007) Mechanical behavior of nickel+aluminum powder-reinforced epoxy composites. Materials Science and Engineering A, 443, 209-218.
50. Molefi, J.A., Luyt, A.S., and Krupa, I. (2010) Comparison of LDPE, LLDPE and HDPE as matrices for phase change materials based on a soft Fischer-Tropsch paraffin wax. Thermochimica Acta, 500, 88-92.
51. Koysuren, O., Yesil, S., and Bayram, G. (2006) Effect of composite preparation techniques on electrical and mechanical properties and morphology of nylon 6 based conductive polymer composites. Journal of Applied Polymer Science, 102, 2520-2526.
52. Yung, K.C., Zhu, B.L., Yue, T.M., and Xie, C.S. (2010) Effect of the filler size and content on the thermomechanical properties of particulate aluminum nitride filled epoxy composites. Journal of Applied Polymer Science, 116, 225-236.
53. Saini, G., Bhardwaj, R., Choudhary, V., and Narula, A.K. (2010) Poly(vinyl chloride)-Acacia bark flour composite: effect of particle size and filler content on mechanical, thermal, and morphological characteristics. Journal of Applied Polymer Science, 117, 1309-1318.
54. Mottram, J.T. (1992) Design charts for the thermal conductivity of particulate composites. Materials & Design, 13, 221-225.
55. Bigg, D. (1995) Thermal conductivity of heterophase polymer compositions, in Thermal and Electrical Conductivity of Polymer Materials, vol. 119, Advances in Polymer Science, Springer, Berlin, pp. 1-30.
56. Zhou, W., Qi, S., Tu, C., Zhao, H., Wang, C., and Kou, J. (2007) Effect of the particle size of Al2O3 on the properties of filled heat-conductive silicone rubber. Journal of Applied Polymer Science, 104, 1312-1318.
57. Huang, X., Birman, V., Nanni, A., and Tunis, G. (2005) Properties and potential for application of steel reinforced polymer and steel reinforced grout composites. Composites Part B, 36, 73-82.
58. Radheshkumar, C. and Münstedt, H. (2005) Morphology and mechanical properties of antimicrobial polyamide/ silver composites. Materials Letters, 59, 1949-1953.
59. Visy, C., Bencsik, G., Németh, Z., and Vértes, A. (2008) Synthesis and characterization of chemically and electrochemically prepared conducting polymer/iron oxalate composites. Electrochimica Acta, 53, 3942-3947.
60. Xia, X., Xie, C., Cai, S., Wen, F., Zhu, C., and Yang, X. (2006) Effect of the loading and size of copper particles on the mechanical properties of novel Cu/LDPE composites for use in intrauterine devices. Materials Science and Engineering A, 429, 329-333.
61. Clingerman, M.L. (1998) Development and modelling of electrically conductive composite materials, in Chemical Engineering, Michigan Technological University, Michigan, p. 286.
62. Blaker, J.J., Nazhat, S.N., and Boccaccini, A.R. (2003) Development and characterisation of silver-doped bioactive glass-coated sutures for tissue engineering and wound healing applications. Biomaterials, 25, 1319- 1329.
63. Zhang, Q., Tian, M., Wu, Y., Lin, G., and Zhang, L. (2004) Effect of particle size on the properties of Mg(OH)2-filled rubber composites. Journal of Applied Polymer Science, 94, 2341-2346.
64. Xu, Y., Chung, D.D.L., and Mroz, C. (2001) Thermally conducting aluminum nitride polymer-matrix composites. Composites Part A, 32, 1749-1757.
65. Nikzad, M.,Masood, S.H., and Sbarski, I. (2011) Thermo-mechanical properties of a highly filled polymeric composites for fused deposition modelling. Materials & Design, 32, 3448-3456.
66. Tang, Y., Xia, X., Wang, Y., and Xie, C. (2010) Study on the mechanical properties of Cu/LDPE composite IUDs. Contraception, 83, 255-262.
67. McCullough, R.L. (1985) Generalized combining rules for predicting transport properties of composite materials. Composites Science and Technology, 22, 3-21.
68. Sundstrom, D.W. and Lee, Y.-D. (1972) Thermal conductivity of polymers filled with particulate solids. Journal of Applied Polymer Science, 16, 3159-3167.
69. Progelhof, R.C., Throne, J.L., and Ruetsch, R.R. (1976) Methods for predicting the thermal conductivity of composite systems: a review. Polymer Engineering & Science, 16, 615-625.
70. Chen, C.R., Qin, S.Y., Li, S.X., and Wen, J.L. (1999) Finite element analysis about effects of particle morphology on mechanical response of composites. Materials Science and Engineering A, 278, 96-105.
71. González, C. and Llorca, J. (1996) Prediction of the tensile stress-strain curve and ductility in Al/SiC composites. Scripta Materialia, 35, 91-97.
72. Song, S.G., Shi, N., Gray, G.T., and Roberts, J.A. (1996) Reinforcement shape effects on the fracture behavior and ductility of particulate-reinforced 6061-Al matrix composites. Metallurgical and Materials Transactions A, 27, 3739- 3746.
73. Zeng, X., Fan, H., and Zhang, J. (2007) Prediction of the effects of particle and matrix morphologies on Al2O3 particle/ polymer composites by finite element method. ComputationalMaterials Science, 40, 395-399.
74. Christman, T., Needleman, A., and Suresh, S. (1989) An experimental and numerical study of deformation in metal-ceramic composites. Acta Metallurgica, 37, 3029-3050.
75. Xue, Q. (2004) The influence of particle shape and size on electric conductivity of metal-polymer composites. European Polymer Journal, 40, 323-327.
76. Cho, J., Joshi, M.S., and Sun, C.T. (2006) Effect of inclusion size on mechanical properties of polymeric composites with micro and nano particles. Composites Science and Technology, 66, 1941-1952.
77. Radford, K.C. (1971) The mechanical properties of an epoxy resin with a second phase dispersion, in Journal of Materials Science, vol. 6, Springer, The Netherlands, pp. 1286-1291.
78. Mamunya, Y.P., Zois, H., Apekis, L., and Lebedev, E.V. (2004) Influence of pressure on the electrical conductivity of metal powders used as fillers in polymer composites. Powder Technology, 140, 49-55.
79. Jiang, Y., Tohgo, K., and Yang, H. (2010) Study of the effect of particle size on the effective modulus of polymeric composites on the basis of the molecular chain network microstructure. Computational Materials Science, 49, 439-443.
80. Bhattacharya, S.K. and Chaklader, A.C.D. (1982) Review on metal-filled plastics. Part 1. Electrical conductivity. Polymer-Plastics Technology and Engineering, 19, 21-51.
81. Nogales, S. and Böhm, H.J. (2008) Modeling of the thermal conductivity and thermomechanical behavior of diamond reinforced composites. International Journal of Engineering Science, 46, 606-619.
82. Bayer, R.K., Ezquerra, T.A., Zachmann, H.G., Baltá Calleja, F.J., Martinez Salazar, J., Meins, W., Diekow, R.E., and Wiegel, P. (1988) Conductive PE-carbon composites by elongation flow injection moulding, Journal of Materials Science, 23, 475-480.
83. Salazar, J.M., Bayer, R.K., Ezquerra, T.A., and Calleja, F.J.B. (1989) Conductive polyethylene-carbon black composites by elongational-flow injection moldingPart 3. Study of the structure and morphology, Colloid & Polymer Science, 267, 409-413.
84. Feller, J.F. (2004) Conductive polymer composites: influence of extrusion conditions on positive temperature coefficient effect of poly(butylene terephthalate)/poly(olefin)-carbon black blends. Journal of Applied Polymer Science, 91, 2151-2157.
85. Weber, M. and Kamal, M.R. (1997) Estimation of the volume resistivity of electrically conductive composites. Polymer Composites, 18, 711-725.
86. Coleman, J., Khan, U., and Gun.ko, Y. (2006) Mechanical reinforcement of polymers using carbon nanotubes. Advanced Materials, 18, 689-706.
87. Al-Saleh, M.H. and Sundararaj, U. (2009) Electrically conductive carbon nanofiber/polyethylene composite: effect of melt mixing conditions. Polymers for Advanced Technologies, 22, 246-253.
88. Torquato, S. (1984) Bulk properties of two-phase disordered media. I: Cluster expansion for the effective dielectric constant of dispersions of penetrable spheres. The Journal of Chemical Physics, 81, 5079-5088.
89. McLachlan, D.S., Blaszkiewicz, M., and Newnham, R.E. (1990) Electrical resistivity of composites. Journal of the American Ceramic Society, 73, 2187-2203.
90. Bruggemann, D.A.G. (1935) The calculation of various physical constants of heterogeneous substances. I. The dielectric constants and conductivities of mixtures composed of isotropic substances. Annals of Physics, 24, 636-664.
91. Brown, W.F. (1955) Solid-mixture permittivities. Journal of Chemical Physics, 23, 1514-1517.
92. Broadbent, S.R. and Hammersley, J.M. (1957) Percolation processes I. Crystals and mazes. Proceedings of the Cambridge Philosophical Society, 53, 629-641.
93. Kirkpatrick, S. (1973) Percolation and conduction. Reviews of Modern Physics, 45, 574-588.
94. McLachlan, D.S. (1985) Equation for the conductivity of metal-insulator mixture. Journal of Physics C, 18, 1891-1897.
95. McLachlan, D.S. (1988) Measurement and analysis of a model dual-conductivity medium using a generalised effectivemedium theory. Journal of Physics C, 21, 188-191.
96. Deprez, N. and Maclachlan, D.S. (1988) The analysis of the electrical conductivity of graphite powders during compaction. Journal of Physics D, 21, 101.
97. Deprez, N., McLachlan, D.S., and Sigalas, I. (1988) The measurement and comparative analysis of the electrical and thermal conductivities, permeability and Young.s modulus of sintered nickel. Solid State Communications, 66, 869-872.
98. Meredith, R.E., and Tobias, C.W. (1962) Conduction in Heterogeneous Systems, Advances in Electrochemistry and Electrochemical Engineering (ed. C.W. Tobias), Interscience, New York, pp. 15-47.
99. Lux, F. (1993) Models proposed to explain the electrical conductivity of mixtures made of conductive and insulating materials. Journal ofMaterials Science, 28, 285-301.
100. Mottram, J.T. and Taylor, R. (1991) Thermal transport properties. International Encyclopedia of Composite, 5, 476-496.
101. Rajinder, P. (2007) New models for thermal conductivity of particulate composites. Journal of Reinforced Plastics and Composites, 26, 643-651.
102. Rajinder, P. (2008) Thermal conductivity of three-component composites of core-shell particles. Materials Science and Engineering A, 498, 135-141.
103. Hatta, H. and Taya, M. (1985) Effective thermal conductivity of a misoriented short fiber composite. Journal of Applied Physics, 58, 2478-2486.
104. Torquato, S. (1997) Effective stiffness tensor of composite media-I. Exact series expansions. Journal of the Mechanics and Physics of Solids, 45, 1421-1448.
105. Hashin, Z. and Shtrikman, S. (1962) A variational approach to the theory of the effective magnetic permeability of multiphase materials. Journal of Applied Physics, 33, 3125-3131.
106. Torquato, S. (1985) Effective electrical conductivity of two-phase disordered composite media. Journal of Applied Physics, 58, 3790-3797.
107. Nielsen, L.E. (1974) The thermal and electrical conductivity of two phase systems. Industrial and Engineering Chemistry Fundamentals, 13, 17-18.
108. Sanada, K., Tada, Y., and Shindo, Y. (2009) Thermal conductivity of polymer composites with close-packed structure of nano and micro fillers. Composites Part A, 40, 724-730.
109. Mamunya, E.P., Davidenko, V.V., and Lebedev, E.V. (1995) Percolation conductivity of polymer composites filled with dispersed conductive filler. Polymer Composites, 16, 319-324.
110. Bueche, F. (1972) Electrical resistivity of conducting particles in an insulating matrix. Journal of Applied Physics, 43, 4837-4838.
111. Slupkowski, T. (1984) Electrical conductivity of mixtures of conducting and insulating particles. Physica Status Solidi A, 83, 329-333.
112. Rajagopal, C. and Satyam, M. (1978) Studies on electrical conductivity of insulator-conductor composites. Journal of Applied Physics, 49, 5536-5542.
113. Lewis, T.B. and Nielsen, L.E. (1970) Dynamic mechanical properties of particulate-filled composites. Journal of Applied Polymer Science, 14, 1449-1471.
114. Theret, D.P., Levesque, M.J., Sato, M., Nerem, R.M., and Wheeler, L.T. (1988) The application of a homogeneous halfspace model in the analysis of endothelial cell micropipette measurements. Journal of Biomechanical Engineering, 110, 190-199.
115. Bilodeau, G.G. (1992) Regular pyramid punch problem. Journal of Applied Mechanics, 59, 519-523.
116. Harding, J.W. and Sneddon, I.N. (1945) The elastic stresses produced by the indentation of the plane surface of a semiinfinite elastic solid by a rigid punch. Mathematical Proceedings of the Cambridge Philosophical Society, 41, 16-26.
117. Mijailovich, S.M., Kojic, M., Zivkovic, M., Fabry, B., and Fredberg, J.J. (2002)Afinite element model of cell deformation during magnetic bead twisting. Journal of Applied Physiology, 93, 1429-1436.
118. Schmid-Schönbein, G.W., Sung, K.L., Tözeren, H., Skalak, R., and Chien, S. (1981) Passive mechanical properties of human leukocytes. Biophysical Journal, 36, 243-256.
119. Sato, M., Theret, D.P., Wheeler, L.T., Ohshima, N., and Nerem, R.M. (1990) Application of the micropipette technique to the measurement of cultured porcine aortic endothelial cell viscoelastic properties. Journal of Biomechanical Engineering, 112, 263-268.
120. Cheng, L., Xia, X., Yu, W., Scriven, L.E., and Gerberich, W.W. (2000) Flat-punch indentation of viscoelastic material. Journal of Polymer Science B, 38, 10-22.
121. Alcaraz, J., Buscemi, L., Grabulosa, M., Trepat, X., Fabry, B., Farré, R., and Navajas, D. (2003) Microrheology of human lung epithelial cells measured by atomic force microscopy. Biophysical Journal, 84, 2071-2079.