Speed and load torque observer application in high-speed train electric drive

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 2, 2010, Pages 565-574

  Guzinski, Jaroslaw ^a   Abu Rub, Haitham ^b   Diguet, Marc ^c   Krzeminski, Zbigniew ^a   Lewicki, Arkadiusz ^a  

^a GDANSK UNIVERSITY OF TECHNOLOGY   (Poland)

^b TEXAS A AND M UNIVERSITY AT QATAR   (Qatar)

^c ALSTOM   (France)

Author keywords

Diagnostics; Induction motor; Observers; Rail vehicle; Sensorless control

Indexed keywords

DIAGNOSTIC SYSTEMS; EXISTING PROBLEMS; EXPERIMENTAL INVESTIGATIONS; HIGH SPEED TRAINS; INDUCTION MOTOR DRIVE; LOAD TORQUE OBSERVER; MOTOR LOAD TORQUE; MOTOR TORQUE; OBSERVERS; RAIL VEHICLES; SENSOR FAULT; SENSOR LESS CONTROL; SPEED SENSORS; TORQUE TRANSMISSION;

ELECTRIC DRIVES; MECHANICAL DRIVES; MOTORS; RAIL MOTOR CARS; RAILROADS; SENSORS; SPEED; SYNCHRONOUS MOTORS; TORQUE; TORQUE MEASUREMENT;

INDUCTION MOTORS;

EID: 75449104641     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2029582     Document Type: Conference Paper

References (31)

1. J. F. Martins, V. F. Pires, and A. J. Pires, "Unsupervised neural-networkbased algorithm for an on-line diagnosis of three-phase induction motor stator fault," IEEE Trans. Ind. Electron., vol.54, no.1, pp. 259-263, Feb. 2007.
2. S. H. Kia, H. Henao, and G. A. Capolino, "A high-resolution frequency estimation method for three-phase induction machine fault detection," IEEE Trans. Ind. Electron., vol.54, no.4, pp. 2305-2314, Aug. 2007.
3. S. Khomfoi and L. M. Tolbert, "Fault diagnosis and reconfiguration for multilevel inverter drive using AI-based techniques," IEEE Trans. Ind. Electron., vol.54, no.6, pp. 2954-2968, Dec. 2007.
4. Y. M. Chen, H. C. Wu, M. W. Chou, and K. Y. Lee, "Online failure prediction of the electrolytic capacitor for LC filter of switchingmode power converters," IEEE Trans. Ind. Electron., vol.55, no.1, pp. 400-406, Jan. 2008.
5. S. Y. Kim, K. Nam, H.-S. Song, and H.-G. Kim, "Fault diagnosis of a ZVS DC-DC converter based on DC-link current pulse shapes," IEEE Trans. Ind. Electron., vol.55, no.3, pp. 1491-1494, Mar. 2008.
6. Z. Krzemiñski, "Sensorless control of the induction motor based on new observer," in Proc. Int. Conf. Power Electron., Intell. Motions, Power Quality, (PCIM), Nuremberg, Germany, 2000, pp. 313-318.
7. K. Ohnishi, M. Shibata, and T. Murakami, "Motion control for advanced mechatronics," IEEE/ASME Trans.Mechatronics, vol.1, no.1, pp. 56-67, Mar. 1996.
8. L. Harnefors andM. Hinkkanen, "Complete stability of reduced-order and full-order observers for sensorless IMdrives," IEEE Trans. Ind. Electron., vol.55, no.3, pp. 1319-1329, Mar. 2008.
9. D. Traoré, F. Plestan, A. Glumineau, and J. Leon, "Sensorless induction motor: High-order sliding-mode controller and adaptive interconnected observer," IEEE Trans. Ind. Electron., vol.55, no.11, pp. 3818-3827, Nov. 2008.
10. K. M. Al-Hussain, "Dynamic stability of two rigid rotors connected by a flexible coupling with angular misalignment," J. Sound Vib., vol.266, no.2, pp. 217-234, Sep. 2003.
11. N. Driot and J. Perret-Liaudet, "Variability of modal behavior in terms of critical speeds of a gear pair due to manufacturing errors and shaft misalignments," J. Sound Vib., vol.292, no.3-5, pp. 824-843, May 2006.
12. A. C. J. Luo, "Past, current and future on nonlinear dynamics and noise origins of non-smooth gear transmission dynamic systems," in Proc. IEEE Intell. Veh. Symp., 2005, pp. 674-681.
13. L. Vedmar and A. Andersson, "A method to determine dynamic loads on spur gear teeth and on bearings," J. Sound Vib., vol.267, no.5, pp. 1065-1084, Nov. 2003.
14. S. Kadowaki, K. Ohishi, T. Hata, N. Iida, M. Takagi, T. Sano, and S. Yasukawa, "Antislip readhesion control based on speed-sensorless vector control and disturbance observer for electric commuter train-Series 205-5000 of the East Japan Railway Company," IEEE Trans. Ind. Electron., vol.24, no.4, pp. 2001-2007, Aug. 2007.
15. A. Hace, K. Jezernik, and A. ̂abanovic, "SMC with disturbance observer for a linear belt drive," IEEE Trans. Ind. Electron., vol.54, no.6, pp. 3402-3412, Dec. 2007.
16. K. Szabat and T. Orlowska-Kowalska, "Performance improvement of industrial drives with mechanical elasticity using nonlinear adaptive Kalman filter," IEEE Trans. Ind. Electron., vol.55, no.3, pp. 1075-1084, Mar. 2008.
17. D. Brambilla, L. M. Capisani, A. Ferrara, and P. Pisu, "Fault detection for robot manipulators via second-order sliding modes," IEEE Trans. Ind. Electron., vol.55, no.11, pp. 3954-3963, Nov. 2008.
18. M. Blödt, P. Granjon, B. Raison, and G. Rostaing, "Models for bearing damage detection in induction motors using stator current monitoring," IEEE Trans. Ind. Electron., vol.55, no.4, pp. 1813-1822, Apr. 2008.
19. C. D. Begg, T. Merdes, C. Byington, and K. Maynard, "Dynamics modelling for mechanical fault diagnostics and prognostics," in Proc. Mech. Syst. Model. Failure Diagnosis Prognosis, Maintenance Rel. Conf. (MARCON), Gatlinburg, TN, 1999.
20. S. Silva and M. Dias, Jr., "Statistical damage detection in stationary rotor systems through time series analysis," in Proc. Brazilian Conf. Dyn., Control, Their Appl. (DINCON), Guaratinguetá, Brazil, 2006.
21. A. M. Silva, R. J. Povinelli, and N. A. O. Demerdash, "Induction machine broken bar and stator short-circuit fault diagnostics based on three-phase stator current envelopes," IEEE Trans. Ind. Electron., vol.55, no.3, pp. 1310-1318, Mar. 2008.
22. J. Guzinski, M. Diguet, Z. Krzeminski, A. Lewicki, and H. Abu-Rub, "Application of speed and load torque observers in high speed train drive for diagnostic purposes," IEEE Trans. Ind. Electron., vol.56, no.1, pp. 248-256, Jan. 2009.
23. J. Guzinski, M. Diguet, Z. Krzeminski, A. Lewicki, and H. Abu-Rub, "Application of speed and load torque observers in high speed train," in Proc. 13th Int. EPE-PEMC, Poznan, Poland, 2008, pp. 1405-1412.
24. S. Villwock andM. Pacas, "Application of theWelch-method for the identification of two-and three-mass-systems," IEEE Trans. Ind. Electron., vol.55, no.1, pp. 457-466, Jan. 2008.
25. M. S. Tondos, "Minimizing electromechanical oscillations in the drives with resilient couplings by means of state and disturbance observers," in Proc. EPE Conf., Brighton, U.K., 1993, pp. 360-365.
26. M. Wlas, Z. Krzeminski, and H. A. Toliyat, "Neural-network-based parameter estimations of induction motors," IEEE Trans. Ind. Electron., vol.55, no.4, pp. 1783-1793, Apr. 2008.
27. D. G. Luenberger, "An introduction to observers," IEEE Trans. Autom. Control, vol.AC-16, no.6, pp. 596-602, Dec. 1971.
28. Z. Krzemiñski, "Observer of induction motor speed based on exact disturbance model," in Proc. Int. Conf. EPE-PEMC, Poznan, Poland, 2008, pp. 2325-2330.
29. K. Rajashekara, A. Kawamura, and K. Matsuse, Sensorless Control of AC Motor Drives. Piscataway, NJ: IEEE Press, 1996.
30. M. Adamowicz and J. Guziñski, "Control of sensorless electric drive with inverter output filter," in Proc. 4th Int. Symp. AUTSYM,Wismar, Germany, Sep. 22/23, 2005.
31. S. M. A. Cruz and A. J. M. Cardoso, "Diagnosis of rotor faults in closedloop induction motor drives," in Conf. Rec. IEEE IAS Annu. Meeting, Tampa, FL, Oct. 8-12, 2006, pp. 2346-2353.