Hot tensile deformation and fracture behaviors of AZ31 magnesium alloy

Materials and Design

Volumn 49, Issue , 2013, Pages 209-219

  Deng, Jiao ^a   Lin, Y C ^a   Li, Shui Sheng ^a   Chen, Jian ^b   Ding, Yi ^a  

^a CENTRAL SOUTH UNIVERSITY   (China)

^b CHANGSHA UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

Deformation mechanisms; Fracture morphology; Magnesium alloy; Plastic deformation

Indexed keywords

COALESCENCE; DUCTILITY; FRACTURE; GRAIN BOUNDARIES; GRAIN GROWTH; LIQUIDS; MAGNESIUM ALLOYS; MORPHOLOGY; PLASTIC DEFORMATION; STRAIN HARDENING; STRAIN RATE; TENSILE TESTING;

AZ31 MAGNESIUM ALLOY; DEFORMATION MECHANISM; DEFORMATION PARAMETER; DEFORMATION TEMPERATURES; DIFFUSE NECKING; DISLOCATION CREEP; ELONGATION TO FRACTURE; EUTECTIC LIQUID PHASE; EUTECTIC MELTING; FLOW CURVES; FRACTURE MECHANISMS; FRACTURE MORPHOLOGY; HOT TENSILE; HOT-ROLLED; INCIPIENT MELTING; INTERGRANULAR FRACTURE; LIQUID PHASE; LOW STRAIN RATES; LOW TEMPERATURES; RAPID GROWTH; RECRYSTALLIZED GRAINS; STRAIN HARDENING RATE; STRAIN RATE SENSITIVITY; TEMPERATURE RANGE; UNIAXIAL TENSILE TEST; VOID COALESCENCE;

DEFORMATION;

EID: 84874765195     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.01.023     Document Type: Article

References (46)

1. Changizian P., Zarei-Hanzaki A., Roostaei A.A. The high temperature flow behavior modeling of AZ81 magnesium alloy considering strain effects. Mater Des 2012, 39:384-389.
2. Lin Y.C., Chen X.M., Liu Z.H., Chen J. Investigation of uniaxial low-cycle fatigue failure behavior of hot-rolled AZ91 magnesium alloy. Int J Fatigue 2013, 48:122-132.
3. Lin Y.C., Chen X.M., Chen G. Uniaxial ratcheting and low-cycle fatigue failure behaviors of AZ91D magnesium alloy under cyclic tension deformation. J Alloy Compd 2011, 509:6838-6843.
4. Sabokpa O., Zarei-Hanzaki A., Abedi H.R., Haghdadi N. Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy. Mater Des 2012, 39:390-396.
5. Shahri Z., Zarei-Hanzaki A., Abedi H.R., Fatemi-Varzaneh S.M. An investigation to the hot deformation characteristics of AZ31 alloy through continuous cooling compression testing method. Mater Des 2011, 36:470-476.
6. Barnett M.R. Twinning and the ductility of magnesium alloys: Part I: "Tension" twins. Mater Sci Eng A 2007, 464:1-7.
7. Momeni A., Arabi H., Rezaei A., Badri H., Abbasi S.M. Hot deformation behavior of austenite in HSLA-100 microalloyed steel. Mater Sci Eng A 2011, 528:2158-2163.
8. Momeni A., Dehghani K., Ebrahimi G.R. Modeling the initiation of dynamic recrystallization using a dynamic recovery model. J Alloy Compd 2011, 509:9387-9393.
9. Mirzadeh H., Najafizadeh A. The rate of dynamic recrystallization in 17-4 PH stainless steel. Mater Des 2010, 31:4577-4583.
10. Chen M.S., Lin Y.C., Ma X.S. The kinetics of dynamic recrystallization of 42CrMo steel. Mater Sci Eng A 2012, 556:260-266.
11. Mandal S., Sivaprasad P.V., Dube R.K. Modeling microstructural evolution during dynamic recrystallization of alloy D9 using artificial neural network. J Mater Eng Perform 2007, 16:672-679.
12. Mandal S., Sivaprasad P.V., Dube R.K., Raj B. Kinetics, mechanism and modeling of microstructural evolution during dynamic recrystallization in a 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel. Mater Sci Forum 2007, 550:601-606.
13. Mandal S., Mishra S.K., Kumar A., Samajdar I., Sivaprasad P.V., Jayakumar T., et al. Evolution and characterization of dynamically recrystallized microstructure in a titanium-modified austenitic stainless steel using ultrasonic and EBSD techniques. Philos Mag 2008, 88:883-897.
14. Mandal S., Bhaduri A.K., Sarma V.S. Influence of state of stress on dynamic recrystallization in a titanium-modified austenitic stainless steel. Metall Mater Trans A 2012, 43:410-414.
15. Lin Y.C., Chen M.S., Zhong J. Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel. J Mater Process Technol 2008, 205:308-315.
16. Lin Y.C., Chen M.S., Zhong J. Microstructural evolution in 42CrMo steel during compression at elevated temperatures. Mater Lett 2008, 62:2132-2135.
17. Lin Y.C., Chen M.S., Zhong J. Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process. Comput Mater Sci 2008, 43:1117-1122.
18. Mandal S., Bhaduri A.K., Sarma V.S. A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel. Metall Mater Trans A 2011, 42:1062-1072.
19. Mandal S., Bhaduri A.K., Sarma V.S. Role of twinning on dynamic recrystallization and microstructure during moderate to high strain rate hot deformation of a Ti-modified austenitic stainless steel. Metall Mater Trans A 2012, 43:2056-2068.
20. Wei Y., Wang Q., Zhu Y., Zhou H., Ding W., Chino Y., et al. Superplasticity and grain boundary sliding in rolled AZ91 magnesium alloy at high strain rates. Mater Sci Eng A 2003, 360:107-115.
21. Watanabe H., Mukai T., Ishikawa K., Higashi K. High-strain-rate superplasticity in an AZ91 magnesium alloy processed by ingot metallurgy route. Mater Trans 2002, 43:78-80.
22. Kim W.J., Chung S.W., Chung C.S., Kum D. Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures. Acta Mater 2001, 49:3337-3345.
23. Kim W.J., Park J.D., Yoon U.S. Superplasticity and superplastic forming of Mg-Al-Zn alloy sheets fabricated by strip casting method. J Alloys Compd 2008, 464:197-204.
24. Liu M.P., Ma C.J., Wang Q.D., Wu G.H., Zhu Y.P., Ding W.J. Superplastic deformation behavior of commercial magnesium alloy AZ31. Chin J Nonferr Met 2002, 12:797-801.
25. Mukai T., Watanabe H., Higashi K. Application of superplasticity in commercial magnesium alloy for fabrication of structural components. Mater Sci Technol 2000, 11:1314-1319.
26. Wu X., Liu Y. Superplasticity of coarse-grained magnesium alloy. Scr Mater 2002, 46:269-274.
27. Liu X., Du G., Wu R., Niu Z., Zhang M. Deformation and microstructure evolution of a high strain rate superplastic Mg-Li-Zn alloy. J Alloys Compd 2011, 509:9558-9561.
28. Tan J.C., Tan M.J. Superplasticity and grain boundary sliding characteristics in two stage deformation of Mg-3Al-1Zn alloy sheet. Mater Sci Eng A 2003, 339:81-89.
29. Mintz B., Yue S., Jonas J. Hot ductility of steels and its relationship to the problem of transverse cracking during continuous casting. Int Mater Rev 1991, 36:187-220.
30. Peng W., Li P.J., Zeng P., Lei L. Hot deformation behavior and microstructure evolution of twin-roll-cast Mg-2.9Al-0.9Zn alloy: a study with processing map. Mater Sci Eng A 2008, 494:173-178.
31. Myshlyaev M., McQueen H., Mwembela A., Konopleva E. Twinning, dynamic recovery and recrystallization in hot worked Mg-Al-Zn alloy. Mater Sci Eng A 2002, 337:121-133.
32. Sabokpa O., Zarei-Hanzaki A., Abedi H.R. An investigation into the hot ductility behavior of AZ81 magnesium alloy. Mater Sci Eng A 2012, 550:31-38.
33. ISO 783 Metallic materials-Tensile testing at elevated temperature; 1999.
34. Chow C.L., Yu L.G., Demeri M.Y. A unified damage approach for predicting forming limit diagrams. J Eng Mater Technol 1997, 119:346-353.
35. Lu J., Qi L., Dong J., Zeng X., Ding W., Yao Z. Deformation behaviors of AZ31 magnesium alloy by equal channel angular extrusion. Chin J Nonferr Met 2009, 19:424-432.
36. Tan J.C., Tan M.J. Superplasticity in a rolled Mg-3Al-1Zn alloy by two-stage deformation method. Scr Mater 2002, 47:101-106.
37. Lin Y.C., Li L.T., Xia Y.C., Jiang Y.Q. Hot deformation and processing map of a typical Al-Zn-Mg-Cu alloy. J Alloy Compd 2013, 550:438-445.
38. Watanabe H., Takara A., Somekawa H., Mukai T., Higashi K. Effect of texture on tensile properties at elevated temperatures in an AZ31 magnesium alloy. Scr Mater 2005, 52:449-454.
39. Vespa G., Mackenzie L., Verma R., Zarandi F., Essadiqi E., Yue S. The influence of the as-hot rolled microstructure on the elevated temperature mechanical properties of magnesium AZ31 sheet. Mater Sci Eng A 2008, 487:243-250.
40. Bruni C., Forcellese A., Gabrielli F., Simoncini M. Effect of temperature, strain rate and fibre orientation on the plastic flow behaviour and formability of AZ31 magnesium alloy. Mater Process Technol 2010, 210:1354-1363.
41. Wang Q.D., Chen W.Z., Zeng X.Q., Lu Y.Z., Ding W.J., Zhu Y.P., et al. Effects of ca addition on the microstructure and mechanical properties of AZ91magnesium alloy. J Mater Sci 2001, 36:3035-3040.
42. Ohno M., Mirkovic D., Schmid-Fetzer R. Liquidus and solidus temperatures of Mg-rich Mg-Al-Mn-Zn alloys. Acta Mater 2006, 54:3883-3891.
43. Lee S.W., Chen Y.L., Wang H.Y., Yang C.F., Yeh J.W. On mechanical properties and superplasticity of Mg-15Al-1Zn alloys processed by reciprocating extrusion. Mater Sci Eng A 2007, 464:76-84.
44. Lloyd C.H., Loretto M.H. Dislocations in extruded β'-NiAl. Phys Status Solidi (B) 1970, 39:163-170.
45. Frost H.J., Ashby M.F. Deformation-mechanism maps 1982, Pergamon Press, p. 21-44.
46. Dahle A.K., Lee Y.C., Nave M.D., Schaffer P.L., StJohn D.H. Development of the as-cast microstructure in magnesium-aluminium alloys. J light met 2001, 1:61-72.