Analysis of CO2 sorption/desorption kinetic behaviors and reaction mechanisms on Li4SiO4

AIChE Journal

Volumn 59, Issue 3, 2013, Pages 901-911

  Qi, Zhang ^a   Daying, Han ^a   Yang, Liu ^a   Qian, Ye ^a   Zibin, Zhu ^a  

^a EAST CHINA UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

CO2 sorption desorption process; Kinetic model; Li4SiO4; Steam

Indexed keywords

DESORPTION PROCESS; DIFFUSION CONTROL; DOUBLE EXPONENTIAL; EXPERIMENTAL DATUM; FACTSAGE; KINETIC BEHAVIOR; KINETIC MODELS; MODEL FIT; REACTION MECHANISM; SHRINKING CORE; SORPTION PROCESS; SORPTION/DESORPTION; THERMO-GRAVIMETRIC;

CRYSTAL STRUCTURE; DESORPTION; KINETICS; LITHIUM; STEAM;

CARBON DIOXIDE;

EID: 84874527228     PISSN: 00011541     EISSN: 15475905     Source Type: Journal    
DOI: 10.1002/aic.13861     Document Type: Article

References (26)

1. Kato M, Yoshikawa S, Nakagawa K. Carbon dioxide absorption by lithium orthosilicate in a wide range of temperature and carbon dioxide concentrations. J Mater Sci Lett. 2002;21:485-487.
2. Reynolds PS. Carbon dioxide capture from flue gas by pressure swing adsorption at high temperature using a K-promoted HTlc: effects of mass transfer on the process performance. Environ Prog. 2006;25:334-342.
3. Barelli L, Bidini G, Gallorini F, Servili S. Hydrogen production through sorption-enhanced steam methane reforming and membrane technology: a review. Energy. 2008;33:554-570.
4. Beaver MG, Caram HS, Sircar S. Sorption enhanced reaction process for direct production of fuel-cell grade hydrogen by low temperature catalytic steam-methane reforming. J Power Sources. 2010;195:1998-2002.
5. Bhat SA, Sadhukhan J. Process intensification aspects for steam methane reforming: an overview. AIChE J. 2009;55:408-422.
6. Yang H, Xu Z, Fan M, Gupta R, Slimane R, Bland A, Wright I. Progress in carbon dioxide separation and capture: a review. J Environ Sci. 2008;20:14-27.
7. Hufton JR, Mayorga S, Sircar S. Sorption-enhanced reaction process for hydrogen production. AIChE J. 1999;45:248-256.
8. Koumpouras G, Alpay E, Lapkin A, Ding Y, Stepanek F. The effect of adsorbent characteristics on the performance of a continuous sorption-enhanced steam methane reforming process. Chem Eng Sci. 2007;62:5632-5637.
9. Lysikov A, Trukhan S, Okunev A. Sorption enhanced hydrocarbons reforming for fuel cell powered generators. Int J Hydrogen Energy. 2008;33:3061-3066.
10. Dou B, Dupont V, Rickett G, Blakeman N, Williams PT, Chen H, Ding Y, Ghadiri M. Hydrogen production by sorption-enhanced steam reforming of glycerol. Bioresource Technol. 2009;100:3540-3547.
11. Essaki K, Muramatsu T, Kato M. Effect of equilibrium shift by using lithium silicate pellets in methane steam reforming. Int J Hydrogen Energy. 2008;33:4555-4559.
12. Essaki K, Muramatsu T, Kato M. Effect of equilibrium-shift in the case of using lithium silicate pellets in ethanol steam reforming. Int J Hydrogen Energy. 2008;33:6612-6618.
13. 2 absorption by lithium silicate at room temperature. J Chem Eng Jpn. 2004;37:772-777.
14. 2 acceptors. J Environ Eng. 2009;135:397-403.
15. 3 as sorbent: sorption kinetics and reactor simulation. Catalysis Today. 2005;106:41-46.
16. 2 production. Chem Eng Sci. 2004;59:931-942.
17. 2-acceptor. Ind Eng Chem Res. 2007;46:8729-8737.
18. 4 by using different gas flow rates and particle sizes. J Phys Chem A. 2010;114:4535-4541.
19. 4: study of the particle size effect. Ind Eng Chem Res. 2007;46:2407-2412.
20. Xiong R, Ida J, Lin YS. Kinetics of carbon dioxide sorption on potassium-doped lithium zirconate. Chem Eng Sci. 2003;58:4377-4385.
21. 2 sorption on lithium zirconate. Environ Sci Technol. 2003;37:1999-2004.
22. 2 removal at high temperature using packed bed of lithium silicate pellets. J Ceramic Soc Jpn. 2006;114:739-742.
23. 2 sorbents. J Chem Ind Eng. 2009;60:641-649.
24. 4). Thermochim Acta. 2011;515:73-78.
25. Zagorowsky GM, Prikhod'ko GP, Ogenko VM, Koval'chuk GK. Investigation of Kinetics of solid-phase synthesis of lithium orthosilicate. J Thermal Anal Calorimetry. 1999;55:699-705.
26. 2 Adsorption by lithium silicate at room temperature. J Chem Eng Jpn. 2004;37:772-777.