Rheological and thermo-mechanical properties of Sepifilm-Sepisperse water dispersions and films

Thermochimica Acta

Volumn 557, Issue , 2013, Pages 7-12

  Cespi, Marco ^a   Bonacucina, Giulia ^a   Casettari, Luca ^b   Palmieri, Giovanni Filippo ^a  

^a UNIVERSITY OF CAMERINO   (Italy)

^b UNIVERSITY OF URBINO   (Italy)

Author keywords

DMA TDMA; Dynamic mechanical thermal analysis; Glass transition; Hypromellose (HPMC); Rheometry

Indexed keywords

AMBIENT CONDITIONS; DYNAMIC MECHANICAL THERMAL ANALYSIS; HYPROMELLOSE; POLYMER CONCENTRATIONS; RHEOLOGICAL PROPERTY; RHEOMETRY; THERMOMECHANICAL PROPERTIES; VISCOSITY AND VISCOELASTICITIES;

ACTIVATION ENERGY; COATINGS; DISPERSIONS; GLASS; GLASS TRANSITION; MECHANICAL PROPERTIES; POLYMERIC FILMS; RHEOLOGY; THERMOANALYSIS; VISCOSITY;

FILM PREPARATION;

EID: 84874408767     PISSN: 00406031     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tca.2013.01.020     Document Type: Article

References (37)

1. G.C. Cole Introduction and overview of pharmaceutical coating G.C. Cole, Pharmaceutical Coating Technology 1995 Taylor & Francis London, UK
2. G.S. Bajwa, C. Sammon, P. Timmins, and C.D. Melia Molecular and mechanical properties of hydroxypropyl methylcellulose solutions during the sol:gel transition Polymer 50 2009 4571 4576
3. K. Mitchell, J.L. Ford, D.J. Armstrong, P.N.C. Elliott, J.E. Hogan, and C. Rostron The influence of substitution type on the performance of methylcellulose and hydroxypropylmethylcellulose in gels and matrices Int. J. Pharm. 100 1993 143 154
4. K. Mitchell, J.L. Ford, D.J. Armstrong, P.N.C. Elliott, C. Rostron, and J.E. Hogan The influence of additives on the cloud point, disintegration and dissolution of hydroxypropylmethylcellulose gels and matrix tablets Int. J. Pharm. 66 1990 233 242
5. M. Roberts, M. Cespi, J.L. Ford, A.M. Dyas, J. Downing, L.G. Martini, and P.J. Crowley Influence of ethanol on aspirin release from hypromellose matrices Int. J. Pharm. 332 2007 31 37
6. N. Sarkar Thermal gelation properties of methyl and hydroxypropylmethylcellulose J. Appl. Polym. Sci. 24 1979 1073 1087
7. S.M.C. Silva, F.V. Pinto, F.E. Antunes, M.G. Miguel, J.J.S. Sousa, and A.A.C.C. Pais Aggregation and gelation in hydroxypropylmethyl cellulose aqueous solutions J. Colloid Interface Sci. 327 2008 333 340
8. X.M. Xu, Y.M. Song, Q.N. Ping, Y. Wang, and X.Y. Liu Effect of ionic strength on the temperature-dependent behavior of hydroxypropyl methylcellulose solution and matrix tablet J. Appl. Polym. Sci. 102 2006 4066 4074
9. M. Cespi, G. Bonacucina, G. Mencarelli, L. Casettari, and G.F. Palmieri Dynamic mechanical thermal analysis of hypromellose 2910 free films Eur. J. Pharm. Biopharm. 7 2011 458 463
10. G. Perfetti, K.M.B. Jansen, W.J. Wildeboer, P. van Hee, and G.M.H. Meesters Characterization of physical and viscoelastic properties of polymer films for coating applications under different temperature of drying and storage Int. J. Pharm. 384 2010 109 119
11. M.E. Aulton, M.H. Abdul Razzak, and J.E. Hogan The mechanical properties of hydroxypropylmethylcellulose films derived from aqueous systems: II. The influence of solid inclusions Drug Dev. Ind. Pharm. 10 1984 541 561
12. M.E. Aulton, M.H. Abdul-Razzak, and J.E. Hogan The mechanical properties of hydroxypropylmethylcellulose films derived from aqueous systems. Part 1: The influence of plasticisers Drug Dev. Ind. Pharm. 7 1981 649 668
13. F.L. Laksmana, P.J.A. Hartman Kok, H. Vromans, and K. Van der Voort Maarschalk Predicting the diffusion coefficient of water vapor through glassy HPMC films at different environmental conditions using the free volume additivity approach Eur. J. Pharm. Sci. 37 2009 545 554
14. O. Bley, J. Siepmann, and R. Bodmeier Characterization of moisture-protective polymer coatings using differential scanning calorimetry and dynamic vapor sorption J. Pharm. Sci. 98 2009 651 664
15. E. Mwesigwa, G. Buckton, and A.W. Basit The hygroscopicity of moisture barrier film coatings Drug Dev. Ind. Pharm. 31 2005 959 968
16. E. Mwesigwa, A.W. Basit, and G. Buckton Moisture sorption and permeability characteristics of polymer films: implications for their use as barrier coatings for solid dosage forms containing hydrolyzable drug substances J. Pharm. Sci. 97 2008 4433 4445
17. J. Bajdik, K. Pintye-Hódi, C. Novák, A. Kelemen, G. Regdon Jr., and I. Eros Indirect methods for determination of the protective effects of coating films on the surface of crystals J. Therm. Anal. Calorim. 68 2002 613 627
18. J. Bajdik, K. Pintye-Hódi, O. Planinšek, G. Regdon Jr., R. Dreu, S. Srčič, and I. Eros Film coating as a method to enhance the preparation of tablets from dimenhydrinate crystals Int. J. Pharm. 269 2004 393 401
19. E. Ivanova, E. Teunou, and D. Poncelet Encapsulation of water sensitive products: effectiveness and assessment of fluid bed dry coating J. Food Eng. 71 2005 223 230
20. Seppic, MONOGRAPH SEPIFILM™ LP 014 CLEAR, 2005.
21. Seppic, MONOGRAPH SEPISPERSE™ DRY 5220 RED, 2005.
22. Seppic, SEPIFILM™ Coating made easier, 2006.
23. DOW, Methocel Cellulose Ethers in Aqueous Systems for Tablet Coating, 2002.
24. M.E. Aulton, and M. Twitchell Solution properties and atomization in film coating G.C. Cole, Pharmaceutical Coating Technology 1995 Taylor & Francis London, UK
25. G. Bonacucina, M. Cespi, M. Misici-Falzi, G.F. Palmieri, and Rheological adhesive and release characterisation of semisolid Carbopol/tetraglycol systems Int. J. Pharm. 307 2006 129 140
26. S.H.M. Gibson, R.C. Rowe, and E.F.T. White Mechanical properties of pigmented tablet coating formulations and their resistance to cracking: I. Static mechanical measurement Int. J. Pharm. 48 1988 63 77
27. I.M. Ward, and D.W. Hadley Principles of Linear Viscoelasticity 1997 John Wiley & Sons Ltd. Chicester
28. K.P. Menard Dynamic Mechanical Analysis A Practical Introduction 1999 CRC Press London, UK
29. J. Duncan Principles and application of mechanical thermal analysis P. Gabbot, Principles and Application of Thermal Analysis 2007 Blackwell Publishing Oxford, UK 119 163
30. P.G. Royall, C.Y. Huang, S.W.J. Tang, J. Duncan, G. Van-De-Velde, and M.B. Brown The development of DMA for the detection of amorphous content in pharmaceutical powdered materials Int. J. Pharm. 301 2005 181 191
31. R.A. Talja, and Y.H. Roos Phase and state transition effects on dielectric, mechanical, and thermal properties of polyols Thermochim. Acta 380 2001 109 121
32. I. Weuts, D. Kempen, K. Six, J. Peeters, G. Verreck, M. Brewster, and G. Van Den Mooter Evaluation of different calorimetric methods to determine the glass transition temperature and molecular mobility below Tg for amorphous drugs Int. J. Pharm. 259 2003 17 25
33. A. Lazaridou, C.G. Biliaderis, and V. Kontogiorgos Molecular weight effects on solution rheology of pullulan and mechanical properties of its films Carbohydr. Polym. 52 2003 151 166
34. C.A. Angell Liquid fragility and the glass transition in water and aqueous solutions Chem. Rev. 102 2002 2627 2650
35. D. Champion, M. Le Meste, and D. Simatos Towards an improved understanding of glass transition and relaxations in foods: molecular mobility in the glass transition range Trends Food Sci. Technol. 11 2000 41 55
36. E. Kristo, and C.G. Biliaderis Water sorption and thermo-mechanical properties of water/sorbitol-plasticized composite biopolymer films: caseinate-pullulan bilayers and blends Food Hydrocolloids 20 2006 1057 1071
37. D. Mahlin, J. Wood, N. Hawkins, J. Mahey, and P.G. Royall A novel powder sample holder for the determination of glass transition temperatures by DMA Int. J. Pharm. 371 2009 120 125