Thermal characterization and flammability of structural epoxy adhesive and carbon/epoxy composite with environmental and chemical degradation

Journal of Adhesion Science and Technology

Volumn 26, Issue 7, 2012, Pages 889-910

  Campbell, Richard A ^a   Pickett, Brent M ^b   Saponara, Valeria La ^c   Dierdorf, Douglas ^a  

^a APPLIED RESEARCH ASSOCIATES   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

^c University of California Davis   (United States)

Author keywords

durability; flammability; Structural adhesive; thermogravimetric analysis

Indexed keywords

AEROSPACE COMPOSITE STRUCTURES; AEROSPACE OPERATIONS; CARBON/EPOXY COMPOSITES; CHEMICAL AGENT; CHEMICAL DEGRADATION; EPOXY ADHESIVES; FLAMMABILITY PROPERTIES; HARDNESS TEST; HEAT RELEASE RATE (HRR); HIGH TEMPERATURE; MECHANICAL DAMAGES; MICROSCALE COMBUSTION; NEW RESULTS; ROOM TEMPERATURE; SIMPLIFIED TEST; STRUCTURAL ADHESIVE; THERMAL CHARACTERIZATION;

CHEMICAL OPERATIONS; DEGRADATION; DIFFERENTIAL SCANNING CALORIMETRY; DURABILITY; FLAMMABILITY; FUEL ADDITIVES; HARDNESS; HARDNESS TESTING; HYDRAULIC EQUIPMENT; HYDRAULIC FLUIDS; JET FUEL;

THERMOGRAVIMETRIC ANALYSIS;

EID: 84864676911     PISSN: 01694243     EISSN: 15685616     Source Type: Journal    
DOI: 10.1163/156856111X593621     Document Type: Article

References (40)

1. K. B. Armstrong, L. G. Bevan and W. G. Cole II, Care and Repair of Advanced Composites, 2nd edn. SAE International, Warrendale, PA, USA (2005).
2. K. B. Armstrong, J. Adhesion Sci. Technol. 23, 567 (2009).
3. L. J. Hart-Smith, in:Bonded Repair of Aircraft Structures , A. A. Baker and R. Jones (Eds), pp. 31-47. Martinus Nijhoff Publishers, Dordrecht, The Netherlands (1988).
4. L. J. Hart-Smith, J. Adhesion 82, 181 (2006).
5. K. A. Chabot and J. A. Brescia, J. Adhesion Sci. Technol. 7, 1183 (1993).
6. L. F. M. da Silva and R. D. Adams, Int. J. Adhesion Adhesives 27, 362 (2007).
7. I. A. Ashcroft and A. D. Crocombe, in:Modeling of Adhesively Bonded Joints , L. F. M. da Silva and A. Öchsner (Eds), pp. 183-223. Springer-Verlag, Berlin, Germany (2008).
8. Y. Hua, A. D. Crocombe, M. A. Wahab and I. A. Ashcroft, J. Adhesion Sci. Technol. 21, 179 (2007).
9. H. Parvatareddy, J. G. Dillard, J. E. McGrath and D. A. Dillard, J. Adhesion Sci. Technol. 12, 615 (1998).
10. S. A. Hashim and E. M. Knox, J. Adhesion 80, 569 (2004).
11. S. S. Kim, H. N. Yu and D.-G. Lee, Composites Sci. Technol. 67, 3417 (2007).
12. H. Osnes and D. McGeorge, Composites Part B 40, 29 (2009).
13. M. Keller and M. Schollmayer, Composite Struct. 87, 232 (2009).
14. M. A. G. Silva and H. Biscaia, Composite Struct. 85, 164 (2008).
15. A. A. Baker and R. Jones (Eds), Bonded Repair of Aircraft Structures. Martinus Nijhoff Publishers, Dordrecht, The Netherlands (1988).
16. L. F. M. da Silva and A. Öchsner (Eds), Modeling of Adhesively Bonded Joints. Springer-Verlag, Berlin, Germany (2008).
17. M. C. Y. Niu, Composite Airframe Structures -Practical Design Information and Data, 3rd edn. Adaso/Adastra Engineering Center, Granada Hill, CA, USA (2000).
18. A. P. Mouritz and A. G. Gibson, Fire Properties of Polymer Composite Materials. Springer, Dordrecht, The Netherlands (2006).
19. R. E. Lyon andM. L. Janssens, Polymer Flammability, US Federal Aviation Administration, FAA-05/14 (DOT/FAA/AR-05/14), USA (2005), www.fire.tc.faa.gov/ pdf/05-14.pdf.
20. R. J. Asaro, P. Krysl, B. Zhu and W. T. Ramroth, Composite Struct. 68, 399 (2005).
21. J. G. Quintiere, R. N. Walters and S. Crowley, Flammability Properties of Aircraft Carbon-Fiber Structural Composite, US Department of Transportation DOT/FAAR/AR-07/57, USA (2007), www.fire.tc.faa.gov/pdf/07-57.pdf.
22. Y. Sugita, C. Winkelmann and V. La Saponara, Composites Sci. Technol. 70, 829 (2010).
23. Henkel, Structural Adhesive Pastes for Aerospace MRO Applications (2010). http://www.henkel. com/com/content-data/131889-Structural-Adhesive-Pastes-for- MRO.pdf.
24. Henkel, Technical Data Sheet for Hysol EA 9360 (2010), http://www.henkel.com.
25. A. Rider and E. Yeo, The Chemical Resistance of Epoxy Adhesive Joint Exposed to Aviation Fuel and its Additives. Australian Government Department of Defense, DSTO-TR-1650 (2005), .http://dspace.dsto.defence.gov.au/dspace/handle/ 1947/4067
26. US National Transportation Safety Board, Safety Recommendation A-06-27 and -28 (March 24, 2006).
27. D. B. Curliss, The effect of jet fuel exposure on advanced aerospace composites I: thermal and chemical analyses, Materials Directorate, Wright-Patterson Air Force Base, Report WL-TR-91-4017 (1991), http://oai.dtic.mil/oai/oai?verb=getRecordandmetadataPrefix=htmlandidentifier= ADA246559.
28. B. Dao, J. Hodgkin, J. Krstina, J. Mardel and W. J. Tian, J. Appl. Polym. Sci. 102, 3321 (2006).
29. R. Lyon, R. Filipczak, R. N.Walters, S. Crowley and S. I. Stoliarov, Thermal Analysis of Polymer Flammability, US Department of Transportation, DOT/FAA/AR-07/2 (2007).
30. R. E. Lyon, R. N. Walters and S. I. Stoliarov, J. Therm. Anal. Calorim. 89, 441 (2007).
31. R. E. Lyon, R. N. Walters and S. I. Stoliarov, Polym. Eng. Sci. 47, 1501 (2007).
32. W. Xing, L. Song, P. Lv, G. Jie, X. Wang, X. Lv and Y. Hu, Mater. Chem. Phys. 123, 481 (2010).
33. H. Lu and C. A. Wilkie, Polym. Degrad. Stabil. 95, 2388 (2010).
34. V. Babrauskas and R. D. Peacock, Fire Safety J. 18, 255 (1992).
35. R. A. Susott, F. Shafizadeh and T. W. Aanerud, J. Fire Flammability 10, 94 (1979).
36. V. La Saponara, R. Campbell, P. Sullivan and D. Dierdorf, in:Adhesive Properties in Nanomaterials, Composites and Films , K. A.Wilkinson and D. A. Ordonez (Eds). Nova Science Publishers, Inc., New York (2011).
37. S. Popineau, C. Rondeau-Mouro, C. Sulpice-Gaillet and M. E. R. Shanahan, Polymer 46, 10733 (2005).
38. M. A. Albanilla, Y. Li and V. M. Kharbari, Composites Part B 37, 200 (2006).
39. J. L. Abot, A. Yasmin and I. M. Daniel, J. Reinf. Plast. Composites 24, 195 (2005).
40. US Federal Aviation Administration, Department of Transportation, Title 14 of the Code of Federal Regulations (CFR), Chapter 1, Part 25, Airworthiness Standards: Transport Category Airplanes.