Fault-tolerant five-leg converter topology with FPGA-Based reconfigurable control

IEEE Transactions on Industrial Electronics

Volumn 60, Issue 6, 2013, Pages 2284-2294

  Shahbazi, Mahmoud ^a,b   Poure, Philippe ^b   Saadate, Shahrokh ^b   Zolghadri, Mohammad Reza ^a  

^a SHARIF UNIVERSITY OF TECHNOLOGY   (Iran)

^b UNIVERSITÉ DE LORRAINE   (France)

Author keywords

Fault detection; fault tolerant control (FTC); field programmable gate array; five leg converter; open switch fault

Indexed keywords

FAULT DETECTION; RECONFIGURABLE HARDWARE; TOPOLOGY;

CONTINUITY OF SERVICES; CONVERTER TOPOLOGIES; ELECTRICAL DRIVES; EXPERIMENTAL TEST; FAULT DETECTION SCHEMES; FAULT TOLERANT CONTROL; FAULT-TOLERANT; FAULT-TOLERANT CONVERTERS; FIVE-LEG CONVERTER; FOUR-LEG; OPEN-SWITCH FAULT; RECONFIGURABLE CONTROL; RECONFIGURABLE CONTROLLERS; RECONFIGURATION SCHEMES;

FIELD PROGRAMMABLE GATE ARRAYS (FPGA);

EID: 84873641304     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2191754     Document Type: Article

References (30)

1. A. M. S. Mendes and A. J. M. Cardoso, "Fault-tolerant operating strategies applied to three-phase induction-motor drives," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1807-1817, Dec. 2006. (Pubitemid 46432473)
2. B. A. Welchko, T. A. Lipo, T. M. Jahns, and S. E. Schulz, "Fault tolerant three-phase ac motor drive topologies: A comparison of features, cost, and limitations," IEEE Trans. Power Electron., vol. 19, no. 4, pp. 1108-1116, Jul. 2004.
3. M. H. Kim, S. Lee, and K. C. Lee, "Kalman predictive redundancy system for fault tolerance of safety-critical systems," IEEE Trans. Ind. Informat., vol. 6, no. 1, pp. 46-53, Feb. 2010.
4. A. Yazdani, H. Sepahvand, M. L. Crow, and M. Ferdowsi, "Fault detection and mitigation in multilevel converter STATCOMs," IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1307-1315, Apr. 2011.
5. P. Lezana, R. Aguilera, and J. Rodríguez, "Fault detection on multicell converter based on output voltage frequency analysis," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2275-2283, Jun. 2009.
6. M. Rodriguez, A. Claudio, G. Vela-Valdes, P. Sibaja-Teran, L. Hernandez-Gonzalez, and J. Aguayo-Alquicira, "A failure detection strategy for IGBT based on gate voltage behavior applied to a motor drive system," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1625-1633, May 2011.
7. P. Duan, K. Xie, L. Zhang, and X. Rong, "Open-switch fault diagnosis and system reconfiguration of doubly fed wind power converter used in a microgrid," IEEE Trans. Power Electron., vol. 26, no. 3, pp. 816-821, Mar. 2011.
8. S. Cruz, M. Ferreira, A. Mendes, and A. J. M. Cardoso, "Analysis and diagnosis of open-circuit faults in matrix converters," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1648-1661, May 2011.
9. D. Campos-Delgado and D. Espinoza-Trejo, "An observer-based diagnosis scheme for single and simultaneous open-switch faults in induction motor drives," IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 671-679, Feb. 2011.
10. W. Sleszynski, J. Nieznanski, and A. Cichowski, "Open-transistor fault diagnostics in voltage-source inverters by analyzing the load currents," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4681-4688, Nov. 2009.
11. S. Karimi, A. Gaillard, P. Poure, and S. Saadate, "FPGA-based real-time power converter failure diagnosis for wind energy conversion systems," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4299-4308, Dec. 2008.
12. S. Karimi, P. Poure, and S. Saadate, "FPGA-based fully digital fast power switch fault detection and compensation for three-phase shunt active filters," Elect. Power Syst. Res., vol. 78, no. 11, pp. 1933-1940, Nov. 2008.
13. D. U. Campos-Delgado, D. R. Espinoza-Trejo, and E. Palacios, "Faulttolerant control in variable speed drives: A survey," IET Elect. Power Appl., vol. 2, no. 2, pp. 121-134, Mar. 2008. (Pubitemid 351463876)
14. R. L. D. Ribeiro, C. B. Jacobina, E. R. C. da Silva, and A. M. N. Lima, "Fault-tolerant voltage-fed PWM inverter ac motor drive systems," IEEE Trans. Ind. Electron., vol. 51, no. 2, pp. 439-446, Apr. 2004.
15. W. Sae-Kok, D. M. Grant, and B. W. Williams, "System reconfiguration under open-switch faults in a doubly fed induction machine," IET Renewable Power Gener., vol. 4, no. 5, pp. 458-470, Sep. 2010.
16. C. B. Jacobina, R. L. de Araujo Ribeiro, A. M. N. Lima, and E. R. C. da Silva, "Fault-tolerant reversible ac motor drive system," IEEE Trans. Ind. Appl., vol. 39, no. 4, pp. 1077-1084, Jul./Aug. 2003.
17. M. Jones, S. N. Vukosavic, D. Dujic, E. Levi, and P. Wright, "Five-leg inverter PWM technique for reduced switch count two-motor constant power applications," IET Elect. Power Appl., vol. 2, no. 5, pp. 275-287, Sep. 2008.
18. Y. Kimura, M. Hizume, and K. Matsuse, "Independent vector control of two PM motors with five-leg inverter by the expanded two-arm modulation method," in Proc. Eur. Conf. Power Electron. Appl., Dresden, Germany, 2005.
19. C. B. Jacobina, I. S. de Freitas, E. R. C. da Silva, A. M. N. Lima, and R. L. D. A. Ribeiro, "Reduced switch count dc-link ac-ac five-leg converter," IEEE Trans. Power Electron., vol. 21, no. 5, pp. 1301-1310, Sep. 2006.
20. E. Ledezma, B. McGrath, A. Munoz, and T. A. Lipo, "Dual ac-drive system with a reduced switch count," IEEE Trans. Ind. Appl., vol. 37, no. 5, pp. 1325-1333, Sep./Oct. 2001. (Pubitemid 32992801)
21. C. B. Jacobina, I. S. de Freitas, and A. M. N. Lima, "DC-link three-phaseto-three-phase four-leg converters," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1953-1961, Aug. 2007.
22. E. Monmasson, L. Idkhajine, M. N. Cirstea, I. Bahri, A. Tisan, and M. W. Naouar, "FPGAs in industrial control applications," IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 224-243, May 2011.
23. D. Dujic, M. Jones, S. N. Vukosavic, and E. Levi, "A general PWM method for a (2n + 1)-leg inverter supplying n three-phase machines," IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4107-4118, Oct. 2009.
24. R. Bojoi, P. Guglielmi, and G. M. Pellegrino, "Sensorless direct fieldoriented control of three-phase induction motor drives for low-cost applications," IEEE Trans. Ind. Appl., vol. 44, no. 2, pp. 475-481, Mar./Apr. 2008. (Pubitemid 351513019)
25. J. R. Rodríguez, J. W. Dixon, J. R. Espinoza, J. Pontt, and P. Lezana, "PWM regenerative rectifiers: State of the art," IEEE Trans. Ind. Electron., vol. 52, no. 1, pp. 5-22, Feb. 2005. (Pubitemid 40264747)
26. P. Delarue, A. Bouscayrol, and E. Semail, "Generic control method of multileg voltage-source-converters for fast practical implementation," IEEE Trans. Power Electron., vol. 18, no. 2, pp. 517-526, Mar. 2003.
27. F. Abrahamsen, F. Blaabjerg, K. Ries, and H. Rasmussen, "Fuse protection of IGBT's against rupture," in Proc. IEEE Nordic Workshop Power Ind. Electron., 2000, pp. 64-68.
28. M. Malinowski, "Sensorless control strategies for three-phase PWM rectifiers," Ph.D. thesis, Warsaw Univ. Technol., Warsaw, Poland, 2001.
29. S. Karimi, P. Poure, and S. Saadate, "An HIL-based reconfigurable platform for design, implementation, and verification of electrical system digital controllers," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1226-1236, Apr. 2010.
30. S. Karimi, A. Gaillard, P. Poure, and S. Saadate, "Current sensor faulttolerant control for WECS with DFIG," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4660-4670, Nov. 2009.