Damping behavior of implant-supported restorations

Clinical Oral Implants Research

Volumn 24, Issue 2, 2013, Pages 143-148

  Magne, Pascal ^a   Silva, Michael ^a   Oderich, Elisa ^b   Boff, Luis Leonildo ^b   Enciso, Reyes ^a  

^a UNIVERSITY OF SOUTHERN CALIFORNIA   (United States)

^b FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

Author keywords

Adhesion; CAD CAM; Composite resin; Dental implant; Dynamic load response; Implant abutment; Percussion; Porcelain; Probe; Zirconia

Indexed keywords

CEREC; DENTAL PORCELAIN; PARADIGM MZ100; RESIN; SILICON DIOXIDE; Z100 COMPOSITE RESIN; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; CERAMICS; CHEMISTRY; COMPUTER AIDED DESIGN; DENTAL ABUTMENT; DENTAL INLAY; DENTAL PROCEDURE; DENTAL SURGERY; EQUIPMENT; IN VITRO STUDY; TOOTH CROWN; TOOTH IMPLANT; TOOTH PROSTHESIS;

CERAMICS; COMPOSITE RESINS; COMPUTER-AIDED DESIGN; CROWNS; DENTAL ABUTMENTS; DENTAL IMPLANTS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; INLAYS; SILICON DIOXIDE; ZIRCONIUM;

EID: 84872651780     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2011.02311.x     Document Type: Article

References (34)

1. Abrahamsson, I., Berglundh, T. & Lindhe, J. (1997) The mucosal barrier following abutment dis/reconnection. An experimental study in dogs. The Journal of Clinical Periodontology 24: 568-572.
2. Andreasen, F.M., Flugge, E., Daugaard-Jensen, J. & Munksgaard, E.C. (1992) Treatment of crown frac-tured incisors with laminate veneer restorations. An experimental study. Endodontics & Dental Traumatology 8: 30-35.
3. Andriani, W.J., Suzuki, M., Bonfante, E.A., Carvalho, R.M., Silva, N.R. & Coelho, P.G. (2010) Mechanical testing of indirect composite materials directly applied on implant abutments. The Journal of Adhesive Dentistry 12: 1-7.
4. Bates, J.F., Stafford, G.D. & Harrison, A. (1975) Masticatory function-a review of the literature. The Journal of Oral Rehabilitation 2: 349-361.
5. Behr, M., Rosentritt, M., Lang, R. & Handel, G. (2001) Glass fiber-reinforced abutments for dental implants: a pilot study. Clinical Oral Implants Research 12: 174-178.
6. Brenner, D.A. & Earthman, J.E. (1994) Novel instrumentation for quantitative determination of energy damping in materials and structures. Scripta Metallurgica et Materialia 31: 467-471.
7. Curtis, A.R., Wright, A.J. & Fleming, G.J. (2006) The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. The Journal of Dentistry 34: 195-206.
8. Forwood, M.R. & Turner, C.H. (1995) Skeletal adaptations to mechanical usage. Bone 17: 197-205.
9. Garvie, R.C., Hannink, R.C. & Pascoe, R.T. (1975) Ceramic steel? Nature 258: 703-704.
10. Hermann, J.S., Schoolfield, J.D., Schenk, R.K., Buser, D. & Cochran, D.L. (2001) Influence of the size of the microgap on crestal bone changes around titanium implants. A histometric evaluation of unloaded non-submerged implants in the canine mandible. The Journal of Periodontology 72: 1372-1383.
11. Jung, R.E., Jones, A.A., Higginbottom, F.L., Wilson, T.G., Schoolfield, J., Buser, D., Hämmerle, C.H. & Cochran, D.L. (2008) The influence of non-matching implant and abutment diameters on radiographic crestal bone levels in dogs. The Journal of Periodontology 79: 260-270.
12. King, G.N., Hermann, J.S., Schoolfield, J.D., Buser, D. & Cochran, D.L. (2002) Influence of the size of the microgap on crestal bone levels in non-submerged dental implants: a radiographic study in the canine mandible. The Journal of Periodontology 73: 1111-1117.
13. Kosmac, T., Oblak, C., Jevnikar, P., Funduk, N. & Marion, L. (1999) The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dental Materials 15: 426-433.
14. Kunzelmann, K.H., Jelen, B., Mehl, A. & Hickel, R. (2001) Wear evaluation of MZ100 compared to ceramic CAD/CAM materials. International Journal of Computerized Dentistry 4: 171-184.
15. Lincoln, J.D., Rieger, L.E. & Earthman, J.C. (2006) Instrumentation for determining the local damping capacity in honeycomb sandwich composites. Journal of Testing and Evaluation 34: 232-236.
16. Magne, P. & Cascione, D. (2006) Influence of postetching cleaning and connecting porcelain on the microtensile bond strength of composite resin to feldspathic porcelain. The Journal of Prosthetic Dentistry 96: 354-361.
17. Magne, P. & Knezevic, A. (2009a) Influence of overlay restorative materials and load cusps on the fatigue resistance of endodontically treated molars. Quintessence International 40: 729-737.
18. Magne, P. & Knezevic, A. (2009b) Simulated fatigue resistance of composite resin versus porcelain CAD/CAM overlay restorations on endodontically treated molars. Quintessence International 40: 125-133.
19. Magne, P. & Knezevic, A. (2009c) Thickness of CADCAM composite resin overlays influences fatigue resistance of endodontically treated premolars. Dental Materials 25: 1264-1268.
20. Magne, P., Magne, M. & Jovanovic, S.A. (2008) An esthetic solution for single-implant restorations - type III porcelain veneer bonded to a screw-retained custom abutment: a clinical report. The Journal of Prosthetic Dentistry 99: 2-7.
21. Magne, P., Paranhos, M.P. & Burnett, L.H. Jr (2010) New zirconia primer improves bond strength of resin based cements. Dental Materials 26: 345-352.
22. Magne, P., Paranhos, M.P., Burnett, L.H. Jr, Magne, M. & Belser, U.C. (2011a) Fatigue resistance and failure mode of novel-design anterior single-tooth implant restorations: influence of material selection for type III veneers bonded to zirconia abutments. Clinical Oral Implants Research 22: 195-200.
23. Magne, P., Perroud, R., Hodges, J.S. & Belser, U.C. (2000) Clinical performance of novel-design porcelain veneers for the recovery of coronal volume and length. The International Journal of Periodontics & Restorative Dentistry 20: 440-457.
24. Magne, P., Oderich, E., Boff, L.L., Carlos-Cardoso, A.C. & Belser, U. (2011b) Fatigue resistance and failure mode of CAD/CAM composite resin implant abutments restored with type III composite resin and porcelain. Clinical Oral Implants Research doi: 10.1111/j.1600-0501.2010.02103.x
25. Meyer, J., Sheets, C.G. & Earthman, J.C. (2009) Vizualization of osseointegration of mazilla and mandible dental implants. International Journal of Computer Assisted Radiology and Surgery 4: 213-221.
26. Phark, J.H., Duarte, S. Jr, Blatz, M. & Sadan, A. (2009) An in vitro evaluation of the long-term resin bond to a new densely sintered high-purity zirconium-oxide ceramic surface. The Journal of Prosthetic Dentistry 101: 29-38.
27. Ren, Y., Maltha, J.C., Stokroos, L., Liem, R.S. & Kuijpers-Jagtman, A.M. (2008) Age-related changes of periodontal ligament surface areas during force application. The Angle Orthodontist, 78: 1000-1005.
28. Robling, A.G., Duijevelaar, K.M., Geevers, J.V., Ohashi, N. & Turner, C.H. (2001) Modulation of appositional and longitudinal bone growth in the rat ulna by applied static and dynamic force. Bone 29: 105-113.
29. Rosentritt, M., Behr, M., Kolbeck, C., Lang, R. & Handel, G. (2000) In vitro repair of all-ceramic and fibre-reinforced composite crowns. The European Journal of Prosthodontics and Restorative Dentistry 8: 107-112.
30. Sheets, C.G. & Earthman, J.C. (1997) Tooth intrusion in implant-assisted prostheses. Journal of Prosthetic Dentistry 77: 39-45.
31. VanSchoiack, L.R., Wu, J.C., Sheets, C.G. & Earthman, J.C. (2006) Effect of bone density on the damping behavior of dental implants: an in vitro method. Materials Science and Engineering C 26: 1307-1311.
32. Walls, A.W. (1995) The use of adhesively retained all-porcelain veneers during the management of fractured and worn anterior teeth: part 1. Clinical technique. The British Dental Journal 178: 333-336.
33. Wang, H., Aboushelib, M.N. & Felizer, A.J. (2008) Strength influencing variables on CAD/CAM zirconia frameworks. Dental Materials 24: 633-638.
34. Wolfart, M., Lehmann, F., Wolfart, S. & Kern, M. (2007) Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dental Materials 23: 45-50.