In vitro assessment of Function Graded (FG) artificial Hip joint stem in terms of bone/cement stresses: 3D Finite Element (FE) study

BioMedical Engineering Online

Volumn 12, Issue 1, 2013, Pages

  Al Jassir, Fawzi F ^a,b   Fouad, H ^c   Alothman, Othaman Y ^b  

^a KING SAUD UNIVERSITY   (Saudi Arabia)

^b KING SAUD UNIVERSITY   (Saudi Arabia)

^c HELWAN UNIVERSITY   (Egypt)

Author keywords

Bone cement; Finite element; Function graded material; Hip joint; Stem length

Indexed keywords

3D FINITE ELEMENT; 3D FINITE ELEMENT MODEL; 3D FINITE ELEMENT MODELING; CEMENT/STEM INTERFACES; CEMENTED HIP PROSTHESIS; COBALT-CHROMIUM ALLOYS; FG MATERIAL; FINITE ELEMENT; GRADED MATERIALS; HIGH STIFFNESS; HIP JOINTS; IMPLANT LOOSENING; IN-VITRO; ORTHOPEDIC SURGERY; STEM LENGTH; STRESS SHIELDING; TI ALLOYS; UNIFORM STRESS; VON MISES STRESS;

BONE; BONE CEMENT; CHROMIUM ALLOYS; COBALT; FINITE ELEMENT METHOD; HIP PROSTHESES; SHEAR FLOW; SHEAR STRESS; SHIELDING; SPOT WELDING; STIFFNESS; STRESS CONCENTRATION; TITANIUM ALLOYS;

MATERIALS;

BIOMATERIAL; BONE CEMENT; CHROMIUM DERIVATIVE; TITANIUM;

ARTICLE; BIOMECHANICS; CHEMISTRY; COMPUTER SIMULATION; FINITE ELEMENT ANALYSIS; HIP; HIP ARTHROPLASTY; HIP PROSTHESIS; HUMAN; MECHANICAL STRESS; PHYSIOLOGY;

ARTHROPLASTY, REPLACEMENT, HIP; BIOCOMPATIBLE MATERIALS; BIOMECHANICS; BONE CEMENTS; CHROMIUM ALLOYS; COMPUTER SIMULATION; FINITE ELEMENT ANALYSIS; HIP JOINT; HIP PROSTHESIS; HUMANS; STRESS, MECHANICAL; TITANIUM;

MLCS; MLOWN;

EID: 84872199013     PISSN: None     EISSN: 1475925X     Source Type: Journal    
DOI: 10.1186/1475-925X-12-5     Document Type: Article

References (34)

1. Latham B, Goswami T. Effect of geometric parameters in the design of hip implants paper IV. Mater Des 2004, 25:715-722.
2. Pyburn E, Goswami T. Finite element analysis of femoral components paper III - hip joints. Mater Des 2004, 25:705-713.
3. Jiang H. Static and dynamic mechanics analysis on artificial hip joints with different interface designs by the finite element method. Journal of Bionic Engineering 2007, 4:123-131.
4. Félix AE, Vamsi KB, Susmita B, Amit B. Design and fabrication of Co Cr Mo alloy based novel structures for load bearing implants using laser engineered net shaping. Materials Science and Engineering: C 2010, 30:50-57.
5. Kayabasi O, Ekici B. Probabilistic design of a newly designed cemented hip prosthesis using finite element method. Mater Des 2008, 29:963-971.
6. Griza S, Kwietniewski C, Tarnowski G, Bertoni F, Reboh Y, Strohaecker T, Baumvol I. Fatigue failure analysis of a specific total hip prosthesis stem design. International Journal of Fatigue 2008, 30:1325-1332.
7. Bae JY, Farooque U, Lee KW, Kim GH, Jeon I, Yoon TR. Development of hip joint prostheses with modular stems. Computer-Aided Design 2011, 43:1173-1180.
8. Stolk J, Verdonschot N, Cristofolini L, Toni A, Huiskes R. Finite element and experimental models of cemented hip joint reconstructions can produce similar bone and cement strains in pre-clinical tests. J Biomech 2002, 35:499-510. 10.1016/S0021-9290(01)00213-5, 11934419.
9. Gillies RM, Morberg PH, Bruce WJ, Turnbull A, Walsh WR. The influence of design parameters on cortical strain distribution of a cement less titanium femoral stem. Medical Engineering & Physics 2002, 24:109-114. 10.1016/S1350-4533(01)00124-2, 23339071.
10. Senalp AZ, Kayabasi O, Kurtaran H. Static, dynamic and fatigue behavior of newly designed stem shapes for hip prosthesis using finite element analysis. Mater Des 2007, 28:1577-1583.
11. Sabatini AL, Goswami T. Hip implants VII: finite element analysis and optimization of cross-sections. Mater Des 2008, 29:1438-1446.
12. Bellini CM, Galbusera F, Ceroni RG, Raimondi MT. Loss in mechanical contact of cement less ace tabular prostheses due to post-operative weight bearing: a biomechanical model. Med Eng&Phys 2007, 29:175-181. 10.1016/j.medengphy.2006.02.008, 23315799.
13. Rina SR, Itoman M, Mabuchi K. Assessments of different kinds of stems by experiments and FEM analysis: appropriate stress distribution on a hip prosthesis. Clin Biomech 2006, 21:826-833.
14. David BD, Goswami T. Finite element analysis of hip stem designs. Mater Des 2008, 29:45-60.
15. Darwish SM, Al-Samhan AM. Optimization of artificial hip joint parameters. Material science and engineering technology 2009, 40:218-223.
16. Speirs AD, Heller MO, Taylor WR, Duda GN, Perka C. Influence of changes in stem positioning on femoral loading after THR using a short-stemmed hip implant. Clin Biomech 2007, 22:431-439.
17. Chen WP, Tai CL, Lee MS, Lee PC, Liu CP, Chun-Hsiung Shih H. Comparison of stress shielding among different cement fixation modes of femoral stem in total Hip arthroplasty-a three-dimensional finite element analysis. Journal of Medical and Biological Engineering 2004, 24:183-187.
18. Mahamood RM, Akinlabi ET, Shukla M, Pityana S. Functionally Graded Material: An Overview. Proceedings of the World Congress on Engineering 2012 Vol IIIWCE 2012, 3:1593-1597. London, UK.
19. Watanabe W, Inaguma Y, Sato H, Fujiwara EM. A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method. Materials 2009, 2:2510-2525.
20. Hedia HS, Shabara MA, El-Midany TT, Fouda N. Improved design of cementless hip stems using two-dimensional functionally graded materials. J Biomed Mater Res B ApplBiomater 2006, 79:42-49.
21. Hedia HS, Shabara MAN, El-Midany TT, Fouda N. A method of material optimization of cementless stem through functionally graded material. Int J Mech Mater Des 2004, 1:329-346.
22. Gong H, Wu W, Fang J, Dong X, Zhao M, Guo T. Effects of materials of cementless femoral stem on the functional adaptation of bone. Journal of Bionic Engineering 2012, 9:66-74.
23. Oshkour AA, Osman NA, Yau YH, Tarlochan F, Abas W. Design of new generation femoral prostheses using functionally graded materials: a finite element analysis. Proceedings of the institution of mechanical engineers, part H. Journal of Engineering in Medicine
24. ANSYS Version 14 2011, ANSYS Inc, Canonsburg Pennsylvania, USA.
25. CATIA V5 Dassault Systemes 2008, Mississauga Ontario, Canada, CATIA V5.
26. Fouad H. Effects of the bone-plate material and the presence of a gap between the fractured bone and plate on the predicted stresses at the fractured bone. Medical Engineering & Physics 2010, 32:783-789. 10.1016/j.medengphy.2010.05.003, 23339071.
27. Fouad H. Assessment of function-graded materials as fracture fixation bone-plates under combined loading conditions using finite element modelling. Medical Engineering & Physics 2011, 33:456-463. 10.1016/j.medengphy.2010.11.013, 23339071.
28. Fouad H. In vitro evaluation of stiffness graded artificial hip joint femur head in terms of joint stresses distributions and dimensions: finite element study. Journal of Materials Science: Materials in Medicine 2011, 22:1589-1598. 10.1007/s10856-011-4319-2, 21505827.
29. Boger A, Bohner M, Heini P, Verrier S, Schneider E. Properties of an injectable low modulus PMMA bone cement for osteoporotic bone. Journal of Biomedical Materials Research Part: Applied Biomaterials 2008, 86:474-482.
30. Abdullah AH, MohdAsri MN, Alias MS, Tardan G. Finite element analysis of cemented Hip arthroplasty: influence of stem tapers. Proceedings of the international Multi Conference of engineering and computer scientists 2010, Hong Kong, Vol III.
31. Sivasankar M, Chakraborty D, Dwivedy SK. Finite element analysis of composite hip prosthesis. National conference on biomechanics 2004, IIT Delhi.
32. Abdullah AH, Jaafar EF, Nasir N, Abdul Latip EN, Tardan G. Influences of prosthesis stem lengths in cementless total Hip arthroplasty. Applied Mechanics and Materials 2011, 52-54:2088-2093.
33. Rawal BR, Ribeiro R, Rajesh Malhotra R, Bhatnagar N. Design and manufacturing of femoral stems for the Indian population. J Manuf Process 2012,
34. Yang CT, Wei HW, Kao HC, Cheng CK. Design and test of hip stem for medullary revascularization. Medical Engineering & Physics 2009, 31:994-1001. 10.1016/j.medengphy.2009.06.001, 23339071.