Finite Element Analysis of Localized Plasticity in Al 2024-T3 Subjected to Fretting Fatigue

Tribology Transactions

Volumn 55, Issue 6, 2012, Pages 805-814

  Talemi, Reza Hojjati ^a   Wahab, Magd Abdel ^a  

^a GHENT UNIVERSITY   (Belgium)

Author keywords

Finite Element Analysis; Fretting Fatigue; Initial Crack Location; Localized Plasticity

Indexed keywords

2024-T3; AXIAL STRESS; COEFFICIENT OF FRICTIONS; CONTACT GEOMETRY; CONTACT INTERFACE; CONTACT MODELS; CRACK INITIATION SITES; CYCLIC FATIGUE; ELASTO-PLASTIC; FINITE ELEMENT; FRETTING DAMAGE; FRETTING FATIGUES; INITIAL CRACKS; ISOTROPIC HARDENINGS; LOCALIZED PLASTICITY; MATERIAL BEHAVIOR; OSCILLATORY MOTION; TEST SPECIMENS; VON MISES; YIELD SURFACE;

CRACKS; ELASTOPLASTICITY; END EFFECTORS; FINITE ELEMENT METHOD; PLASTICITY; STRESS CONCENTRATION;

FRETTING CORROSION;

EID: 84871728777     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402004.2012.711436     Document Type: Article

References (28)

1. National Transportation Safety Board. (1989), Aircraft Accident Report-Aloha Airlines, National Transportation Safety Board: Washington, DC.
2. National Transportation Safety Board. "NTSB Continues Investigation of Southwest Airlines Flight 812, " Available at: http://www.ntsb.gov (accessed April 25, 2011).
3. Endo, K. and Goto, H. (1976), "Initiation and Propagation of Fretting Fatigue Cracks, " Wear, 38(2), pp 311-324.
4. Iyer, K. and Mall, S. (2001), "Analyses of Contact Pressure and Stress Amplitude Effects on Fretting Fatigue Life, " Journal of Engineering Materials and Technology, 123(1), pp 85-93.
5. Massingham, M. and Irving, P. E. (2006), "The Effect of Variable Amplitude Loading on Stress Distribution within a Cylindrical Contact Subjected to Fretting Fatigue, " Tribology International, 39(10), pp 1084-1091.
6. Wang, R. H., Jain, V. K., and Mall, S. (2007), "A Non-Uniform Friction DistributionModel for Partial Slip Fretting Contact, " Wear, 262(5-6), pp 607-616.
7. Tsai, C. T. and Mall, S. (2000), "Elasto-Plastic Finite Element Analysis of Fretting Stresses in Pre-Stressed Strip in Contact with Cylindrical Pad, " Finite Elements in Analysis and Design, 36(2), pp 171-187.
8. Goh, C. H., Wallace, J., Neu, R. W., and McDowell, D. L. (2001), "Polycrystal Plasticity Simulations of Fretting Fatigue, " International Journal of Fatigue, 23(Suppl. 1), pp 423-435.
9. Goh, C. H., McDowell, D. L., and Neu, R. W. (2006), "Plasticity in Polycrystalline Fretting Fatigue Contacts, " Journal of the Mechanics and Physics of Solids, 54(2), pp 340-367.
10. Shin, K. S. (2009), "Prediction of Fretting Fatigue Behavior under Elastic-Plastic Conditions, " Journal of Mechanical Science and Technology, 23(10), pp 2714-2721.
11. Hills, D. A. and Nowell, D. (1994), Mechanics of Fretting Fatigue, Kluwer Academic Publisher: Dordrecht, The Netherlands.
12. Jin, O., Mall, S., et al. (2007), "Fretting Fatigue Behavior of Cu-Al-Coated Ti-6AI-4V, " Tribology Transactions, 50(4), pp 497-506.
13. Cortez, R., Mall, S., and Calcaterra, J. R. (1999), "Investigation of Variable Amplitude Loading on Fretting Fatigue Behavior of Ti-6Al-4V, " International Journal of Fatigue, 21(7), pp 709-717.
14. Lee, H., Mall, S., and Sathish, S. (2005), "Investigation into Effects of Re-Shot-Peening on Fretting Fatigue Behavior of Ti-6Al-4V, " Materials Science and Engineering A, 390(1-2), pp 227-232.
15. Habbit, Karisson and Sorenson. (2011), "ABAQUS/Standard User's Manual, Version 6.11. "
16. Giner, E., Tur, M., Vercher, A., and Fuenmayor, F. J. (2009), "Numerical Modelling of Crack-Contact Interaction in 2D Incomplete Fretting Contacts Using X-FEM, " Tribology International, 42(9), pp 1269-1275.
17. Gangaraj, S. M., Alvandi-Tabrizi, Y., Farrahi, G. H., Majzoobi, G. H., and Ghadbeigi, H. (2011), "Finite Element Analysis of Shot-Peening Effect on Fretting Fatigue Parameters, " Tribology International, 44(11), pp 1583-1588.
18. Madge, J. J., Leen, S. B., and Shipway, P. H. (2007), "The Critical Role of Fretting Wear in the Analysis of Fretting Fatigue, " Wear, 263(1-6), pp 542-551.
19. Farris, T. N. (1992), "Mechanics of Fretting Fatigue Tests of Contacting Dissimilar Elastic Bodies, " Tribology Transactions, 35(2), pp 346-352.
20. Sabelkin, V. and Mall, S. (2005), "Investigation into Relative Slip during Fretting Fatigue under Partial Slip Contact Condition, " Fatigue and Fracture of Engineering Materials and Structures, 28(9), pp 809-824.
21. Lykins, C. (1999), An Investigation of Fretting Fatigue Crack Initiation Behavior of the Titanium Alloy Ti-6Al-4V, University of Dayton: Dayton, OH.
22. Fellows, L. J., Nowell, D., and Hills, D. A. (1995), "Contact Stresses in a Moderately Thin Strip (with Particular Reference to Fretting Experiments), " Wear, 185(1-2), pp 235-238.
23. Kindervater, C. M., Johnson, A., Kohlgriiber, D., and Liitzenburger, M. (2000), "Crash and High Velocity Impact Simulation Methodologies for Aircraft Structures, " Structural Failure and Plasticity (IMPLAST 2000), Zhao, X. L. and Crzebieta, R. H. (Eds.), pp 345-352, Pergamon: Melbourne, Australia.
24. Dobromirski, J. M. (1992), "Variables of Fretting Process-Are There 50 of Them, " Standardization of Fretting Fatigue Test Methods and Equipment, Attia, M. H. and Waterhouse, R. B. (Eds.), pp 60-66, American Society for Testing and Materials: Philadelphia.
25. Szolwinski, M. P. and Farris, T. N. (1996), "Mechanics of Fretting Fatigue Crack Formation, " Wear, 198(1-2), pp 93-107.
26. Ruiz, C., Boddington, P. H. B., and Chen, K. C. (1984), "An Investigation of Fatigue and Fretting in a Dovetail Joint, " Experimental Mechanics, 24(3), pp 208-217.
27. Kuno, M., Waterhouse, R. B., Nowell, D., and Hills, D. A. (1998), "Initiation and Growth of Fretting Fatigue Cracks in the Partial Slip Regime, " Fatigue and Fracture of Engineering Materials and Structures, 12(5), pp 387-398.
28. Lamacq, V., Dubourg, M. C., et al. (1997), "A Theoretical Model for the Prediction of Initial Growth Angles and Sites of Fretting Fatigue Cracks, " Tribology International, 30(6), pp 391-400.