A non-uniform friction distribution model for partial slip fretting contact

Wear

Volumn 262, Issue 5-6, 2007, Pages 607-616

  Wang, R H ^a   Jain, V K ^a   Mall, S ^b  

^a University of Dayton   (United States)

^b Air Force Institute of Technology   (United States)

Author keywords

Coefficient of friction; Contact stress; Fretting; Partial slip; Relative slip; Stick slip

Indexed keywords

FINITE ELEMENT METHOD; FRICTION; MATHEMATICAL MODELS; STRESS ANALYSIS;

CONTACT STRESS; FRETTING; FRICTION COEFFICIENT; PARTIAL SLIP; RELATIVE SLIP;

FRETTING CORROSION;

FINITE ELEMENT METHOD; FRETTING CORROSION; FRICTION; MATHEMATICAL MODELS; STRESS ANALYSIS;

EID: 33846295465     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2006.07.005     Document Type: Article

References (30)

1. In: Hoeppner D.W., Chandrasekaran V., and Elliot C.B. (Eds). Fretting Fatigue: Current Technologies and Practice, ASTM STP 1367 (2000), American Society for Testing and Materials, West Conshohocken
2. In: Attia M.H., and Waterhouse R.B. (Eds). Standardization of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159 (1992), American Society for Testing and Materials, Philadelphia
3. Hoeppner D.W. Mechanisms of fretting fatigue and their impact on test methods development. In: Attia M.H., and Waterhouse R.B. (Eds). Standardization of Fretting Tests Methods and Equipment, ASTM STP 1159 (1992), American Society for Testing and Materials, Philadelphia 23-32
4. Dobromirski J.M. Variables of fretting process: are there 50 of them?. In: Attia M.H., and Waterhouse R.B. (Eds). Standardization of Fretting Tests Methods and Equipment, ASTM STP 1159 (1992), American Society for Testing and Materials, Philadelphia 60-66
5. Jin O., and Mall S. Shear force effects on fretting fatigue behavior of Ti-6Al-4V. Metall. Mater. Trans. A 35A (2004) 131-138
6. Anton D.L., Lutian M.J., Favron L.H., Logan D., and Annigieri B. The effects of contact stress and slip distance on fretting fatigue damage in Ti-6Al-4V/17-4 PH contacts. In: Hoeppner D.W., Chandrasekran V., and Elliot C.B. (Eds). Fretting Fatigue: Current Technology and Practices, ASTM STP 1367 (2000), American Society for Testing and Materials, West Conshohocken 119-140
7. Adibnazari S., and Hoeppner D.W. The role of normal pressure in modeling fretting fatigue. In: Waterhouse R.B., and Lindley T.C. (Eds). Fretting Fatigue, ESIS 18 (1984), Mechanical Engineering Publications, London 125-133
8. Nakazawa K., Sumita M., and Maruyama N. Effect of contact on fretting fatigue of high strength steel and titanium alloy. In: Attia M.H., and Waterhouse R.B. (Eds). Standardization of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159 (1992), American Society for Testing and Materials, Philadelphia 115-125
9. O. Leiva, S. Mall, V.K. Jain, Effect of shear force on fretting fatigue crack initiation behavior of Ti-6Al-4V. Proceedings of the AIAA/ASME/ASCE/AHS/ASC, Structures, Structural Dynamics and Materials Conference, Denver, CO, 22-27 April 2002.
10. Soderberg S., Bryggman U., and McCullough T. Frequency effects in fretting wear. Wear 110 (1986) 19-34
11. Iyer K., and Mall S. Effects of cyclic frequency and contact pressure on fretting fatigue under two-level block loading. Fatigue Fract. Eng. Mater. Struct. 23 (2000) 335-346
12. Nix K.J., and Lindley T.C. The influence of relative slip range and contact materials on the fretting fatigue properties of 3.5NiCrMoV rotor steel. Wear 125 (1988) 147-162
13. Milestone W.D., and Janeczko J.F. Friction between steel surfaces during fretting. Wear 18 (1971) 29-40
14. Venkatesh T.A., Conner B.P., Lee C.S., Giannakopoulos A.E., Lindley T.C., and Suresh S. An experimental investigation of fretting fatigue in Ti-6Al-4V: the role of contact conditions and microstructure. Metallurgical and Materials Trans. 32A (2001) 1131-1146
15. Nix K.J., and Lindley T.C. The application of fracture mechanics to fretting fatigue. Fatigue Fract. Eng. Mater. Struct. 8 2 (1985) 143-160
16. Hills D.A., Nowell D., and Sackfield A. Surface fatigue considerations in fretting. In: Dowson D., Taylor C.M., Godet M., and Berthe D. (Eds). Interface Dynamics, Proceedings of the 14th Leeds-Lyon Symposium on Tribology (1988), Elsevier, Amsterdam 35-40
17. Rabinowicz E. Friction and Wear of Materials. 2nd ed. (1995), John Wiley, New York
18. Endo K., Goto H., and Fukunaga T. Behavior of friction force in fretting fatigue. Bull. J.S.M.E. 17 108 (1974) 647-654
19. Hills D.A., and Nowell D. Mechanics of Fretting Fatigue (1994), Kluwer Academic Publishers
20. Switek W. An investigation of friction force in fretting fatigue. In: Hoeppner D.W., Chandrasekran V., and Elliot C.B. (Eds). Fretting Fatigue: Current Technology and Practices, ASTM STP 1367 (2000), American Society for Testing and Materials, West Conshohocken 154-166
21. Nishioka K., and Hirakawa K. Fundamental investigations into fretting fatigue, Part 3. Bull. J.S.M.E. 12 51 (1969) 397-407
22. Hills D.A., Nowell D., and O'Connor J.J. On the mechanics of fretting fatigue. Wear 125 (1988) 129-146
23. Lee H., and Mall S. Some observations on frictional force during fretting fatigue. Tribol. Lett. 17 (2004) 491-499
24. Naboulsi S., and Nicholas T. Limitation of the coulomb friction assumption in fretting fatigue analysis. Int. J. Solids Struct. 40 (2003) 6497-6512
25. G.W. Stachowiak, A.W. Batchelor, Engineering Tribology, Tribology Series No. 24, Pub. Elsevier, 1993.
26. Lykins C.D., Mall S., and Jain V.K. An evaluation of parameters for predicting fretting fatigue crack initiation. Int. J. Fatigue 22 (2000) 703-716
27. Lykins C.D., Mall S., and Jain V.K. Combined experimental-numerical investigation of fretting fatigue crack initiation. Int. J. Fatigue 23 (2001) 703-711
28. Tsai C.T., and Mall S. Elasto-plastic finite element analysis of fretting stresses in pre-stressed strip in contact with cylindrical pad. Finite Elem. Anal. Design 36 (2000) 171-187
29. Naboulsi S., and Mall S. Investigation of high cycle and low cycle fatigue interaction on fretting behavior. Int. J. Mech. Sci. 44 (2002) 1625-1645
30. McVeigh P., and Farris T. Finite element analysis of fretting stresses. J. Tribol. 119 (1997) 797-801