An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

International Journal of Plasticity

Volumn 41, Issue , 2013, Pages 147-164

  Xu, Qiang ^a   Lu, Zixing ^a  

^a BEIHANG UNIVERSITY   (China)

Author keywords

Damage; Interface yielding; Metal matrix composites; Numerical modeling

Indexed keywords

BONDED INTERFACE; COHESIVE ZONE MODEL; CONSTITUTIVE RELATIONS; DAMAGE; DAMAGE AND FAILURE; DEBONDING PROCESS; DISPLACEMENT JUMP; EFFECTS OF HARDENING; ELASTIC MATERIALS; ELASTIC-PLASTIC; FAILURE RESPONSE; FINITE DEFORMATIONS; GEOMETRICALLY NONLINEAR; INTERFACIAL MODELS; LARGE DEFORMATIONS; MATRIX MATERIALS; METAL MATRIX COMPOSITES; METAL-CERAMIC INTERFACE; NON-LINEAR FINITE ELEMENTS; PARAMETRIC STUDY; PLASTIC MATERIALS; POROUS MATRIXS; POROUS PLASTICITY; QUASI-STATIC; STRESS-STRAIN RESPONSE; TRACTION-SEPARATION; TRANSVERSE LOADING; VOID VOLUME FRACTION;

CERAMIC MATERIALS; DEFORMATION; ELASTOPLASTICITY; FINITE ELEMENT METHOD; LOADING; METALLIC MATRIX COMPOSITES; NUMERICAL MODELS; PLASTICITY; YIELD STRESS;

POLYMER MATRIX COMPOSITES;

EID: 84871721499     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2012.09.008     Document Type: Article

References (64)

1. R.K. Abu Al-Rub Interfacial gradient plasticity governs scale-dependent yield strength and strain hardening rates in micro/nano structured metals Int. J. Plast. 25 2008 1997 2024
2. S. Akarapu, H.M. Zbib, and D.F. Bahr Analysis of heterogeneous deformation and dislocation dynamics in single crystal micropillars under compression Int. J. Plast. 26 2008 239 257
3. G. Alfano, and M.A. Crisfield Finite element interface models for the delamination anaylsis of laminated composites: mechanical and computational issues Int. J. Numer. Meth. Engng. 50 2001 1701 1736
4. Y. Bansal, and M.J. Pindera Finite-volume direct averaging micromechanics of heterogeneous materials with elastic-plastic phases Int. J. Plast. 22 2006 775 825
5. P. Barai, and G.J. Weng Mechanics of very fine-grained nanocrystalline materials with contributions from grain interior, GB zone, and grain-boundary sliding Int. J. Plast. 25 2009 2410 2434
6. T. Belytschko, and T. Black Elastic crack growth in finite elements with minimal remeshing Int. J. Numer. Meth. Eng. 45 1999 601 620
7. T. Belytschko, and R. Gracie On XFEM applications to dislocations and interfaces Int. J. Plasticity 23 2007 1721 1738
8. Bruzzi, M.S., Mchugh, P.E., ORourke, F., Linder, T., 2001. Micromechanical modeling of the static and cyclic loading of an Al2124-SiC MMC. Int. J. Plast.17, 565-599.
9. N. Chandra, H. Li, C. Shet, and H. Ghonem Some issues in the application of cohesive zone models for metal-ceramic interfaces Int. J. Solids Struct. 39 2002 2827 2855
10. Y.C. Chen, and S. Ghosh Micromechanical analysis of strain rate-dependent deformation and failure in composite microstructures under dynamic loading conditions Int. J. Plast. 32-33 2012 218 247
11. C.C. Chu, and A. Needleman Void nucleation effects in biaxially stretched sheets J. Eng. Mater. Tech. 102 1980 249 256
12. A. Corigliano, S. Mariani, and A. Pandolfi Numerical analysis of rate-dependent dynamic composite delamination Compos. Sci. Technol. 66 2006 766 775
13. K. Danas, V.S. Deshpande, and N.A. Fleck Compliant interfaces: a mechanism for relaxation of dislocation pile-ups in a sheared single crystal Int. J. Plast. 26 2010 1792 1805
14. I. Doghri, L. Adam, and N. Bilger Mean-field homogenization of elasto-viscoplastic composites based on a general incrementally affine linearization method Int. J. Plast. 26 2010 219 238
15. M. Fagerstrom, and R. Larsson Approaches to dynamic fracture modelling at finite deformations J. Mech. Phys. Solids 56 2008 613 639
16. J.H. Fan, R.J. Stewart, and X.G. Zeng A multiscale method for dislocation nucleation and seamlessly passing scale boundaries Int. J. Plast. 27 2011 2013 2124
17. Fredriksson, P., Gudmundson.P, Mikkelsen, L.P., 2009. Finite element implementation and numerical issues of strain gradient plasticity with application to metal matrix composites. Int. J. Solids Struct. 46, 3977-3987.
18. B.P. Gearing, H.S. Moon, and L. Anand A plasticity model for interface friction: application to sheet metal forming Int. J. Plast. 17 2001 237 271
19. S.J. Guo, G.Z. Kang, and J. Zhang Meso-mechanical constitutive model for ratchetting of particle-reinforced metal matrix composites Int. J. Plast. 27 2011 1896 1915
20. A. Gurson Continuum theory of ductile rupture by void nucleation and growth J. Eng. Mater. Trans. ASME 99 1977 2 15
21. M.S. Huang, L.G. Zhao, and J. Tong Discrete dislocation dynamics modelling of mechanical deformation of nickel-based single crystal superalloys Int. J. Plast. 28 2012 141 158
22. S. Kruch, and J.-L. Chaboche Multi-scale analysis in elasto- viscoplasticity coupled with damage Int. J. Plast. 27 2011 2026 2039
23. R. Larsson, and Y. Zhang Homogenization of microsystem interconnects based on micropolar theory and discontinuous approximation J. Mech. Phys. Solids 55 2007 819 884
24. E.H. Lee Elastic-plastic deformations at finite strains J. Appl. Mech. 36 1969 1 6
25. B.N. Legarth, and C.F. Niordson Debonding failure and size effects in micro-reinforced composites Int. J. Plast. 26 2010 149 165
26. V.I. Levitas, and I.B. Ozsoy Micromechanical modeling of stress-induced phase transformations. Part I. Thermodynamics and kinetics of coupled interface propagation and reorientation Int. J. Plast. 25 2009 239 280
27. V.I. Levitas, and I.B. Ozsoy Micromechanical modeling of stress-induced phase transformations. Part 2. Computational algorithms and examples Int. J. Plast. 25 2009 546 583
28. N. Li, M. Nastasi, and A. Misra Defect structures and hardening mechanisms in high dose helium ion implanted Cu and Cu/Nb multilayer thin films Int. J. Plast. 32-33 2012 1 16
29. X.N. Liu, and G.K. Hu A continuum micromechanical theory of overall plasticity for particulate composites including particle size effect Int. J. Plast. 21 2005 777 799
30. Z.L. Liu, Z. Zhuang, X.M. Liu, X.C. Zhao, and Z.H. Zhang A dislocation dynamics based higher-order crystal plasticity model and applications on confined thin-film plasticity Int. J. Plast. 27 2011 201 216
31. A. Lodygowski, G. Voyiadjis, B. Deliktas, and A. Palazotto Non-local and numerical formulations for dry sliding friction and wear at high velocities Int. J. Plast. 27 2011 1004 1024
32. P. Moreo, J.M. Garcia-Aznar, and M. Doblare A coupled viscoplastic rate-dependent damage model for the simulation of fatigue failure of cement-bone interfaces Int. J. Plast. 23 2007 2058 2084
33. A. Needleman, and V. Tvergaard An analysis of ductile rupture in notched bars J. Mech. Phys. Solids 32 1984 461 490
34. A. Needleman A continuum model for void nucleation by inclusion debonding J. Appl. Mech. 54 1987 525 531
35. A. Needleman An analysis of tensile decohesion along an interface J. Mech. Phys. Solids 38 1990 289 324
36. D. Okumura, N. Ohno, and K. Yamaguchi Plastic size effect analysis of lamellar composites using a discrete dislocation plasticity approach Int. J. Plast. 27 2011 2040 2055
37. M. Ortiz, and A. Pandolfi Finite-deformation irreversible cohesive element for three-dimensional crack-propagation analysis Int. J. Numer. Meth. Engng. 44 1999 1267 1282
38. S.H. Pyo, and H.K. Lee An elastoplastic damage model for metal matrix composites considering progressive imperfect interface under transverse loading Int. J. Plast. 26 2010 25 41
39. P. Rahul-kumar, A. Jagota, S.J. Bennison, and S. Saigal Interfacial failures in a compressive shear strength test of glass/polymer laminates Int. J. Solids Struct. 37 2000 7281 7305
40. D. Saraev, and S. Schmauder Finite element modelling of Al/SiCp metal matrix composites with particles aligned in stripes-a 2D-3D comparison Int. J. Plast. 19 2003 733 747
41. A. Siddiq, S. Schmauder, and Y. Huang Fracture of bicrystal metal/ceramic interfaces: A study via the mechanism-based strain gradient crystal plasticity theory Int. J. Plast. 23 2007 665 689
42. D.E. Spearot, K.I. Jacob, and D.L. McDowell Dislocation nucleation from bicrystal interfaces with dissociated structure Int. J. Plast. 23 2007 143 160
43. C. Su, Y.J. Wei, and L. Anand An elastic-plastic interface constitutive model: application to adhesive joints Int. J. Plast. 20 2004 2063 2081
44. H. Tan, Y. Huang, C. Liu, and P.H. Geubelle The Mori-Tanaka method for composite materials with nonlinear interface debonding Int. J. Plast. 21 2005 1890 1918
45. P. Thamburaja, H. Pan, and F.S. Chau The evolution of microstructure during twinning: Constitutive equations, finite-element simulations and experimental verification Int. J. Plast. 25 2009 2141 2168
46. P. Thamburaja A finite-deformation-based phenomenological theory for shape-memory alloys Int. J. Plast. 26 2010 1195 1219
47. V. Tvergaard Influence of voids on shear band instabilities under plain strain conditions Int. J. Fract. 17 1981 389 407
48. V. Tvergaard On localization in ductile materials containing spherical voids Int. J. Fract. 18 1982 237 252
49. V. Tvergaard, and A. Needleman Analysis of the cup-cone fracture in a round tensile bar Acta Metall. 32 1984 157 169
50. V. Tvergaard Material failure by void growth to coalescence Adv. Appl. Mech. 27 1990 83 151
51. V. Tvergaard, and J.W. Hutchinson The relation between crack growth resistance and fracture process parameters in elastic-plastic solids J. Mech. Phys. Solids 40 1992 1377 1397
52. M. van den Bosch, P.J.G. Schreurs, and M.G.D. Geers An improved description of the exponential Xu and Needleman cohesive zone law for mixed-mode decohesion Eng. Fract. Mech. 73 2006 1220 1234
53. P. Vena, D. Gastaldi, and R. Contro Determination of the effective elastic-plastic response of metal-ceramic composites Int. J. Plast. 24 2008 483 508
54. G.Z. Voyiadjis, and G. Thiagarajan A cyclic anisotropic-plasticity model for metal matrix composites Int. J. Plast. 12 1996 69 91
55. G.Z. Voyiadjis, and B. Deliktas Formulation of strain gradient plasticity with interface energy in a consistent thermodynamic framework Int. J. Plast. 25 2009 1997 2024
56. Y.J. Wei, and L. Anand Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals J. Mech. Phys. Solids 52 2004 2587 2616
57. T.O. Williams, and M.J. Pindera An analytical model for the elastic axial shear response of unidirectional metal matrix composites Int. J. Plast. 13 1997 261 289
58. S.M. Xia, Y. Qi, T. Perry, and K.S. Kim Strength characterization of Al/Si interfaces: A hybrid method of nanoindentation and finite element analysis Acta Metall. 57 2009 695 707
59. X.P. Xu, and A. Needleman Numerical simulations of fast crack growth in brittle solids J. Mech. Phys. Solids 42 1994 1397 1434
60. J.H. You, W. Lutz, H. Gerger, A. Siddiq, A. Brendel, C. Hoschen, and S. Schmauder Fiber push-out study of a copper matrix composite with an engineered interface. Experiments and cohesive element simulation Int. J. Solids Struct. 46 2009 4277 4286
61. H.M. Zbib, C.T. Overman, F. Akasheh, and D. Bahr Analysis of plastic deformation in nanoscale metallic multilayers with coherent and incoherent interfaces Int. J. Plast. 27 2011 1618 1639
62. Z. Zhang, and G.H. Paulino Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials Int. J. Plast. 21 2005 1195 1254
63. W. Zhang, T.J. Wang, and X. Chen Effect of surface/interface stress on the plastic deformation of nanoporous materials and nanocomposites Int. J. Plast. 26 2010 957 975
64. H.T. Zhu, and H.M. Zbib A macroscopic model for plastic flow in metal-matrix composites Int. J. Plast. 11 1995 471 499