Micromechanical analysis of strain rate-dependent deformation and failure in composite microstructures under dynamic loading conditions

International Journal of Plasticity

Volumn 32-33, Issue , 2012, Pages 218-247

  Chen, Yuli ^b,c   Ghosh, Somnath ^a  

^a JOHNS HOPKINS UNIVERSITY   (United States)

^b BEIHANG UNIVERSITY   (China)

^c The Ohio State University   (United States)

Author keywords

A. Fiber reinforced composites; D. Energy absorption; D. Energy dissipation; D. Failure mode; D. High strain rate

Indexed keywords

COMPOSITE MICROSTRUCTURES; CONTINUUM DAMAGE MECHANIC (CDM); DAMAGE EVOLUTION; DIFFERENT DAMAGES; DUCTILE MATRIX; DYNAMIC LOADING CONDITIONS; ELASTIC VISCOPLASTIC; FIBER-REINFORCED COMPOSITE; GURSON-TVERGAARD-NEEDLEMAN MODEL; HARDENING LAWS; HIGH STRAIN RATES; JOHNSON-COOK; LOAD TYPE; LOADING CHARACTERISTICS; MATERIAL MICROSTRUCTURES; MATRIX MATERIALS; MICRO-MECHANICAL; MICRO-MECHANICAL ANALYSIS; MICRO-STRUCTURAL; MICROSTRUCTURAL MORPHOLOGY; RATE-DEPENDENT DEFORMATION; SIC FIBERS; STRESS WAVE PROPAGATION;

CONTINUUM DAMAGE MECHANICS; DYNAMIC LOADS; ENERGY ABSORPTION; ENERGY DISSIPATION; FAILURE MODES; LOADING; MICROSTRUCTURE; SILICON CARBIDE; STRESS ANALYSIS;

STRAIN RATE;

EID: 84857917546     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2011.10.008     Document Type: Article

References (84)

1. ABAQUS, 2005. ABAQUS/Explicit User's Manual, Version 6.5. Providence, Rhode Island, USA.
2. R.K. Abu Al-Rub, and G.Z. Voyiadjis A finite strain plastic-damage model for high velocity impact using combined viscosity and gradient localization limiters. Part I - theoretical formulation Int. J. Damage Mech. 15 2006 293 334 (Pubitemid 44446413)
3. N. Aravas On the numerical integration of a class of pressure-dependent plasticity models Int. J. Numer. Methods Eng. 24 1987 1395 1416 (Pubitemid 17620112)
4. R.A. Austin, and D.L. McDowell A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates Int. J. Plast. 27 2011 1 24
5. J.M. Bass, and J.T. Oden Adaptive finite element methods for a class of evolution problem in viscoplasticity Int. J. Eng. Sci. 25 1987 623 653 (Pubitemid 17638347)
6. R.C. Batra, and N.M. Hassan Response of fiber reinforced composites to underwater explosive loads Compos. Pt. B-Eng. 38 2007 448 468 (Pubitemid 46330102)
7. A. Benallal, T. Berstad, T. Borvik, O.S. Hopperstad, I. Koutiri, and R. Nogueira de Codes An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the Portevin-Le Chatelier effect Int. J. Plast. 24 2008 1916 1945
8. J. Besson, D. Steglich, and W. Brocks Modeling of plane strain ductile rupture Int. J. Plast. 19 2003 1517 1541
9. Brar, N.S., Joshi, V.S., Harris, B.W., 2009. Constitutive model constants for Al7075-T651 and Al7075-T6. American Physical Society. In: 16th APS Topical Conference on Shock Compression of Condensed Matter.
10. M. Brünig, and S. Gerke Simulation of damage evolution in ductile metals undergoing dynamic loading conditions Int. J. Plast. 27 2011 1598 1617
11. I. Carol, E. Rizzi, and K. William A unified theory of elastic degradation and damage based on a loading surface Int. J. Solids Struct. 31 1994 2835 2865 (Pubitemid 24431613)
12. J.L. Chaboche Continuum damage mechanics 1. General concepts J. Appl. Mech.-Trans. ASME 55 1988 59 64 (Pubitemid 18590044)
13. C.C. Chu, and A. Needleman Void nucleation effects in biaxially stretched sheets J. Eng. Matl. Tech. 102 1980 249 256 (Pubitemid 11484651)
14. A.H. Clausen, T. Børvik, O.S. Hopperstad, and A. Benallal Flow and fracture characteristics of aluminium alloy AA5083-H116 as function of strain rate, temperature and triaxiality Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 364 2004 260 272 (Pubitemid 38158068)
15. W.J. Drugan, and J.R. Willis A micromechanics-based nonlocal constitutive equation and estimates of representative volume element size for elastic composites J. Mech. Phys. Solids 44 1996 497 524 (Pubitemid 126351704)
16. B. Farrokh, and A.S. Khan Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: synthesis, experiment, and constitutive modeling Int. J. Plast. 25 2009 715 732
17. B. Farrokh, and A.S. Khan A strain rate dependent yield criterion for isotropic polymers: low to high rates of loading Eur. J. Mech. A-Solids 29 2010 274 282
18. N.A. Fleck, and J.W. Hutchinson A phenomenological theory for strain gradient effects in plasticity J. Mech. Phys. Solids 41 1993 1825 1857
19. P.S. Follansbee, and U.F. Kocks A constitutive description of the deformation of copper based on the use of the mechanical threshold Acta Metall. 36 1988 81 93 (Pubitemid 18626871)
20. S. Ghosh, and N. Kikuchi An arbitrary Lagrangian-Eulerian finite element method for large deformation analysis of elastic-viscoplastic solids Comput. Method Appl. M. 86 1991 127 188 (Pubitemid 21652771)
21. S. Ghosh, J. Bai, and D. Paquet A homogenization based continuum plasticity-damage model for ductile failure of materials containing heterogeneities J. Mech. Phys. Solids 57 2009 1017 1044
22. A.E. Green, and P.M. Naghdi A general theory of an elastic-plastic continuum Arch. Ration. Mech. An. 18 1965 251 281
23. A. Gurson Continuum theory of ductile rupture by void nucleation and growth J. Eng. Mater. Trans. ASME 99 1977 2 15
24. F.S. Han, Z.G. Zhu, and J.C. Gao Compressive deformation and energy absorbing characteristic of foamed aluminum Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 29 1998 2497 2502
25. S. Hao, and W. Brocks The Gurson-Tvergaard-Needleman-model for rate and temperature-dependent materials with isotropic and kinematic hardening Comput. Mech. 20 1997 34 40 (Pubitemid 127566015)
26. H.E. Hu, L. Zhen, and T. Imai Strain rate sensitivity of a high strain rate superplastic TiNp/2014 Al composite J. Mater. Process. Technol. 210 2010 734 740
27. K.C. Hwang, H. Jiang, Y. Huang, H. Gao, and N. Hu A finite deformation theory of strain gradient plasticity J. Mech. Phys. Solids 50 2002 81 99 (Pubitemid 33089067)
28. A.C. Jacinto, R.D. Ambrosini, and R.F. Danesi Experimental and computational analysis of plates under air blast loading Int. J. Impact Eng. 25 2001 927 947 (Pubitemid 32833078)
29. J.R. Jain, and S. Ghosh Damage evolution in composites with a homogenization-based continuum damage mechanics model Int. J. Damage Mech. 18 2009 533 568
30. Johnson, G.R., Cook, W.H., 1983. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th International Symposium on Ballistics, pp. 541-547.
31. L.M. Kachanov Time of the rupture process under creep conditions Isv. Akad. Nauk. SSR. Otd Tekh. Nauk. 8 1958 26 31
32. G.I. Kanel, E.B. Zaretsky, A.M. Rajendran, S.V. Razorenov, A.S. Savinykh, and V. Paris Search for conditions of compressive fracture of hard brittle ceramics at impact loading Int. J. Plast. 25 2009 649 670
33. T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. Jeulin Determination of the size of the representative volume element for random composites: statistical and numerical approach Int. J. Solids Struct. 40 2003 3647 3679 (Pubitemid 36659117)
34. A.S. Khan, and M. Baig Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy Int. J. Plast. 27 2011 522 538
35. A.S. Khan, and B. Farrokh Thermo-mechanical response of nylon 101 under uniaxial and multi-axial loadings. Part I: experimental results over wide ranges of temperatures and strain rates Int. J. Plast. 22 2006 1506 1529
36. A.S. Khan, and R.Q. Liang Behaviors of three BCC metals over wide range of strain rates and temperatures: experiments and modeling Int. J. Plast. 15 1999 1089 1109
37. A.S. Khan, Y.S. Suh, and R. Kazmi Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys Int. J. Plast. 20 2004 2233 2248
38. A.S. Khan, R. Kazmi, and B. Farrokh Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures Int. J. Plast. 23 2007 931 950 (Pubitemid 46366620)
39. A.S. Khan, R. Kazmi, B. Farrokh, and M. Zupan Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: experiments and modeling over a wide range of strain-rates and temperatures Int. J. Plast. 23 2007 1105 1125 (Pubitemid 46498676)
40. V. Kouznetsova, M.G.D. Geers, and W.A.M. Brekelmans Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme Int. J. Numer. Methods Eng. 54 2002 1235 1260 (Pubitemid 34724730)
41. P. Kumar, and A. Garg Failure modes and fractographic study of glass-epoxy composite under dynamic compression J. Mater. Sci. 23 1988 2305 2309
42. G.S. Langdon, S. Chung Kim Yuen, and G.N. Nurick Experimental and numerical studies on the response of quadrangular stiffened plates. Part II: localised blast loading Int. J. Impact Eng. 31 2005 85 111
43. J.B. Leblond, G. Perrin, and P. Suquet Exact results and approximate models for porous viscoplastic solids Int. J. Plast. 10 1994 213 235
44. J. Lee, and A. Mal Chracterization of matrix damage in metal matrix composites under transverse loads Comput. Mech. 21 1998 339 346
45. J. Lemaitre, and J.-L. Chaboche Mechanics of Solid Materials 1990 Cambridge University Press
46. R. Liang, and A.S. Khan Behaviors of three BCC metals during non-proportional multi-axial loadings and predictions using a recently proposed model Int. J. Plast. 16 2000 1443 1458
47. D.J. Lloyd Particle-reinforced aluminum and magnesium matrix composites Int. Mater. Rev. 39 1994 1 23
48. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, and D.P. Papapostolou On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental Compos. Struct. 2005 69 407 420
49. M.A. Meyers, U.R. Andrade, and A.H. Chokshi The effect of grain size on the high-strain, high-strain-rate behavior of copper Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 26 1995 2881 2893
50. K. Nahshon, and J.W. Hutchinson Modification of the Gurson model for shear failure Eur. J. Mech. A. Solids 27 2008 1 17 (Pubitemid 350181489)
51. K. Nahshon, and Z. Xue A modified Gurson model and its application to punch-out experiments Eng. Fract. Mech. 76 2009 997 1009
52. S. Nemat-Nasser Averaging theorems in finite deformation plasticity Mech. Mater. 31 1999 493 523
53. S. Nemat-Nasser, and Y.C. Choi Strain rate dependence of deformation mechanisms in a Ni-Ti-Cr shape-memory alloy Acta Mater. 53 2005 449 454
54. S. Nemat-Nasser, J.Y. Choi, W.-G. Guo, J.B. Isaacs, and M. Taya High strain-rate, small strain response of a NiTi shape-memory alloy J. Eng. Mater. Technol. 127 2005 83 89 (Pubitemid 40421714)
55. S. Nemat-Nasser, J.Y. Choi, W.-G. Guo, and J.B. Isaacs Very high strain-rate response of a NiTi shape-memory alloy Mech. Mater. 37 2005 287 298
56. S. Nemat-Nasser, Y. Su, W.G. Guo, and J. Isaacs Experimental characterization and micromechanical modeling of superelastic response of a porous NiTi shape-memory alloy J. Mech. Phys. Solids 53 2005 2320 2346 (Pubitemid 41165643)
57. S. Nemat-Nasser, W.J. Kang, J.D. McGee, W.-G. Guo, and J.B. Isaacs Experimental investigation of energy-absorption characteristics of components of sandwich structures Int. J. Impact Eng. 34 2007 1119 1146 (Pubitemid 44820742)
58. K. Oguni, and G. Ravichandran Dynamic compressive behavior of unidirectional E-glass/vinylester composites J. Mater. Sci. 36 2001 831 838 (Pubitemid 32874233)
59. Y.H. Pao, and C.C. Mow The Diffraction of Elastic Waves and Dynamic Stress Concentrations 1973 Crane Russak
60. D. Paquet, and S. Ghosh Microstructural effects on ductile fracture in heterogeneous materials: Part I. sensitivity analysis with LE-VCFEM Eng. Fract. Mech. 2010
61. C. Pellegrino, U. Galvanetto, and B.A. Schrefler Numerical homogenization of periodic composite materials with non-linear material components Int. J. Numer. Methods Eng. 46 1999 1609 1637 (Pubitemid 30507164)
62. X. Peng, W. Pi, and J. Fan A microstructure-based constitutive model for the pseudoelastic behavior of NiTi SMAs Int. J. Plast. 24 2008 966 990 (Pubitemid 351400626)
63. D.L. Preston, D.L. Tonks, and D.C. Wallace Model of plastic deformation for extreme loading conditions J. Appl. Phys. 93 2003 211 220
64. K.T.V. Rao, S.C. Siu, and R.O. Ritchie Failure mechanisms in SiC-fiber reinforced 6061 aluminum alloy composites under monotonic and cyclic loading Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 24 1993 721 734
65. J. Segurado, and J. Llorca A numerical approximation to the elastic properties of sphere-reinforced composites J. Mech. Phys. Solids 50 2002 2107 2121 (Pubitemid 34803080)
66. T. Shalu, E. Abhilash, and M.A. Joseph Development and characterization of liquid carbon fibre reinforced aluminium matrix composite J. Mater. Process. Technol. 209 2009 4809 4813
67. J.C. Simo, and J.W. Ju Strain- and stress-based continuum damage models-I. Formulation Int. J. Solids Struct. 23 1987 821 840 (Pubitemid 18520296)
68. Specialty Materials Inc., 2010. .
69. -1 Journal de physique. Colloques 49 1988 3-3
70. D.J. Steinberg, S.G. Cochran, and M.W. Guinan A constitutive model for metals applicable at high-strain rate J. Appl. Phys. 51 1980 1498 1504 (Pubitemid 11431830)
71. S. Swaminathan, and S. Ghosh Statistically equivalent representative volume elements for composite microstructures. Part II: with damage J. Comput. Mater. 40 7 2006 605 621
72. S. Swaminathan, S. Ghosh, and N.J. Pagano Statistically equivalent representative volume elements for composite microstructures. Part I: without damage J. Comput. Mater. 40 7 2006 583 604
73. V. Tvergaard Influence of voids on shear band instabilities under plain strain conditions Int. J. Fract. 17 1981 389 407 (Pubitemid 12441659)
74. V. Tvergaard On localization in ductile materials containing spherical voids Int. J. Fract. 18 1982 237 252 (Pubitemid 12521713)
75. V. Tvergaard Material failure by void growth to coalescence Adv. Appl. Mech. 27 1990 83 151
76. V. Tvergaard, and A. Needleman Analysis of cup-cone fracture in a round tensile bar Acta Metall. 32 1984 157 169 (Pubitemid 14509228)
77. V. Tvergaard, and A. Needleman Effect of nonlocal damage in porous plastic solids Int. J. Solids Struct. 32 1995 1063 1077
78. R.Z. Valiev, D.A. Salimonenko, N.K. Tsenev, P.B. Berbon, and T.G. Langdon Observations of high strain rate superplasticity in commercial aluminum alloys with ultrafine grain sizes Scripta. Mater. 37 1997 1945 1950 (Pubitemid 127432673)
79. G.Z. Voyiadjis, and R.K. Abu Al-Rub A finite strain plastic-damage model for high velocity impact using combined viscosity and gradient localization limiters. Part II: numerical aspects and simulation Int. J. Damage Mech. 15 2006 335 373 (Pubitemid 44446414)
80. J. Wen, Y. Huang, K.C. Hwang, C. Liu, and M. Li The modified Gurson model accounting for the void size effect Int. J. Plast. 21 2005 381 395
81. C.T. Wu, and M. Koishi A meshfree procedure for the microscopic analysis of particle-reinforced rubber compounds Interact. Multiscale Mech. 2 2009 147 169
82. Z. Xue, M.G. Pontin, F.W. Zok, and J.W. Hutchinson Calibration procedures for a computational model of ductile fracture Eng. Fract. Mech. 77 2010 492 509
83. F.J. Zerilli, and R.W. Armstrong Dislocation-mechanics-based constitutive relations for material dynamics calculations J. Appl. Phys. 61 1987 1816 1825
84. Y. Zhou, H. Mahfuz, and S. Jeelani Numerical simulation for high strain rate failure process of unidirectional Sicf-Al composites Int. J. Damage Mech. 14 2005 321 341 (Pubitemid 41489541)