Modelling and simulation of manufacturing process chains

CIRP Journal of Manufacturing Science and Technology

Volumn 6, Issue 1, 2013, Pages 70-77

  Afazov, S M ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

Aero engine components; Finite Element Data Exchange System (FEDES); Manufacturing process chains

Indexed keywords

AERO-ENGINE COMPONENTS; AEROENGINE GAS; DATA EXCHANGE SYSTEM; DEFECTS INDUCED; FINITE ELEMENTS; FUTURE CHALLENGES; MANUFACTURING PROCESS; MANUFACTURING PROCESS CHAIN; MODELLING AND SIMULATIONS; RESIDUAL STRESS STATE;

AIRCRAFT ENGINES; ELECTRONIC DATA INTERCHANGE; FINITE ELEMENT METHOD; PRODUCTION ENGINEERING; TURBINE COMPONENTS;

INDUSTRIAL ENGINEERING;

EID: 84871691411     PISSN: 17555817     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cirpj.2012.10.005     Document Type: Article

References (39)

1. Ji P. An Algebraic Approach for Dimensional Chain Identification in Process Planning. International Journal of Production Research 1999, 37:99-110.
2. Mbang S., Haasis S. Automation of the Computer-aided Design - Computer-aided Quality Assurance Process Chain in Car Body Engineering. International Journal of Production Research 2004, 17:3675-3689.
3. Denkena B., Rudzio H., Brandes A. Methodology for Dimensioning Technological Interfaces of Manufacturing Process Chains. CIRP Annals - Manufacturing Technology 2006, 55:497-500.
4. Denkena B., Schurmeyer J., Eikotter M. Linking Total Costs and Benefits of Ownership (TCBO) and Process Chain Simulation for Integrated Assessment of Manufacturing Technologies and Processes. Production Engineering - Research and Developments 2011, 5:557-564.
5. Brecher C., Vitr M., Wolf J. Closed-loop CAPP/CAM/CNC Process Chain Based on STEP and STEP-NC Inspection Tasks. International Journal of Computer Integrated Manufacturing 2006, 19:570-580.
6. Heusinger S., Rosso R.S., Klemm P., Newman S.T., Rahimifard S. Integrating the CAx Process Chain for STEP-Compliant NC Manufacturing of Asymmetric Parts. International Journal of Computer Integrated Manufacturing 2006, 19:533-545.
7. Monostori L., Viharos Z. Hybrid, Al- and Simulation-supported Optimisation of Process Chains and Production Plants. CIRP Annals - Manufacturing Technology 2001, 50:353-356.
8. Hyun S., Lindgren L. Simulating a Chain of Manufacturing Processes Using a Geometry-based Finite Element Code with Adaptive Meshing. Finite Elements in Analysis and Design 2004, 40:511-528.
9. Pietrzyk M., Madej L., Weglarczyk S. Tool for Optimal Design of Manufacturing Chain Based on Metal Forming. CIRP Annals - Manufacturing Technology 2008, 57:309-312.
10. Zaeh M.F., Papadakis L., Langhorst M. Simulation of the Manufacturing Process Chain of Welded Frame Structures. Production Research 2008, 2:385-393.
11. Zaeh M.F., Tekkaya A.E., Biermann D., Zabel A., Langhorst M., Schober A., Kloppenborg T., Steiner M., Ungemach E. Integrated Simulation of the Process Chain Composite Extrusion-Milling-Welding for Lightweight Frame Structures. Production Research 2009, 3:441-451.
12. Zaeh M.F., Tekkaya A.E., Langhorst M., Ruhstorfer M., Schober A., Pietzka D. Experimental and Numerical Investigation of the Process Chain From Composite Extrusion to Friction Stir Welding Regarding the Residual Stresses in Composite Extruded Profiles. Production Research 2009, 3:353-360.
13. Afazov S.M., Becker A.A., Hyde T.H. Development of a Finite Element Data Exchange System for Chain Simulation of Manufacturing Processes. Advances in Engineering Software 2012, 47:104-113.
14. Afazov S.M., Nikov S., Becker A.A., Hyde T.H. Manufacturing Chain Simulation of an Aero-engine Disc and Sensitivity Analyses of Micro-scale Residual Stresses. International Journal of Advanced Manufacturing Technology 2011, 52:279-290.
15. Afazov S.M., Becker A.A., Hyde T.H. Mathematical Modelling and Implementation of Residual Stress Mapping from Microscale to Macroscale Finite Element Models. Journal of Manufacturing Science and Engineering 2012, 134:021001.
16. Charles S., Eynard B., Bartholomew P., Paleczny C. Standardization of the Finite Element Analysis Data-Exchange in Aeronautics Concurrent Engineering. Journal of Computing and Information Science in Engineering 2005, 5:63-66.
17. Zeng S., Peak R., Xiao A., Sitaraman S. ZAP: A Knowledge-based FEA Modeling Method for Highly Coupled Variable Topology Multi-body Problems. Engineering with Computers 2008, 24:359-381.
18. Dolenc M. Developing Extendible Component-oriented Finite Element Software. Advances in Engineering Software 2004, 35:703-714.
19. Islam A., Hansen H.N., Tang P.T., Sun J. Process Chains for the Manufacturing of Molded Interconnect Devices. International Journal of Advanced Manufacturing Technology 2009, 42:831-841.
20. Klein M., Eifler D. Influences of the Manufacturing Process Chain Design on the Near Surface Condition and the Resulting Fatigue Behaviour of Quenched and Tempered SAE 4140. Journal of Physics: Conference Series 2010, 240:012052.
21. Epp J., Surm H., Hirsch T., Hoffmann F. Residual Stress Relaxation During Heating of Bearing Rings Produced in Two Different Manufacturing Chains. Journal of Materials Processing Technology 2011, 211:637-643.
22. Bauer W., Knitter R. Development of a Rapid Prototyping Process Chain for the Production Of Ceramic Microcomponents. Journal of Materials Science 2002, 37:3127-3140.
23. Knitter R., Bauer W., Göhring D. Microfabrication of Ceramics by Rapid Prototyping Process Chains. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science 2003, 217:41-51.
24. Hansen H.N., Prichystal J.P., Moller P., Bladt H.H. Complex Process Chains for Manufacturing of Invisible Displays Integrated in Bulk Metal Panels. CIRP Annals - Manufacturing Technology 2007, 56:237-240.
25. Goch G., Dijkman M. Holonic Quality Control Strategy for the Process Chain of Bearing Rings. CIRP Annals - Manufacturing Technology 2009, 58:433-436.
26. Attia U.M., Alcock J.R. A Process Chain for Integrating Microfluidic Interconnection Elements by Micro-overmoulding of Thermoplastic Elastomers. Journal of Micromechanics and Microengineering 2010, 20:055017.
27. Brousseau E.B., Krohs F., Caillaud E., Dimov S., Gibaru O., Fatikow S. Development of a Novel Process Chain Based on Atomic Force Microscopy Scratching for Small and Medium Series Production of Polymer Nanostructured Components. Journal of Manufacturing Science and Engineering 2010, 132:30901-30911.
28. Velkova V., Lalev G., Hirshy H., Scholz S., Hiitola-Keinänen J., Gold H., Haase A., Hast J., Stadlober B., Dimov S. Design and Validation of a Novel Master-making Process Chain for Organic and Large Area Electronics on Flexible Substrates. Microelectronic Engineering 2010, 87:2139-2145.
29. Velkova V., Lalev G., Hirshy H., Omar F., Scholz S., Minev E., Dimov S. Process Chain for Serial Manufacture of 3D Micro- and Nano-scale Structures. CIRP Journal of Manufacturing Science and Technology 2011, 4:340-346.
30. Prokop J., Eberl C., Funk M., Prufe P., Lorenz J., Piotter V., Welz M., Ritzhaupt-Kleissl H. Mechanical Testing of Micro Samples Produced by a Novel LIGA Related Process Chain. Microsystem Technology 2011, 17:281-288.
31. Zdebski D., Afazov S., Ratchev S., Segal J. Model Based Planning of Complex Micro-manufacturing Strategies. IFIP Advances in Information and Communication Technology 2012, 371:191-199.
32. Afazov S.M., Becker A.A., Hyde T.H. FE Modelling of Investment Casting of a High Pressure Turbine Blade Under Directional Cooling. International Journal of Engineering Simulation 2011, 12:32-40.
33. Afazov S.M., Becker A.A., Hyde T.H. FE Prediction of Residual Stresses of Investment Casting in a Bottom Core Vane Under Equiaxed Cooling. Journal of Manufacturing Processes 2011, 13:30-40.
34. Afazov S.M., Ratchev S.M., Segal J., Popov A.A. Chatter Modelling in Micro-milling by Considering Process Nonlinearities. International Journal of Machine Tools and Manufacture 2012, 56:28-38.
35. Ratchev S.M., Afazov S.M., Becker A.A., Liu S. Mathematical Modelling and Integration of Micro-Scale Residual Stresses into Axisymmetric FE Models of Ti6Al4V Alloy in Turning. CIRP Journal of Manufacturing Science and Technology 2011, 4:80-89.
36. Afazov S., Ratchev S., Becker A., Liu S. Integration, FE Modelling and Experimental Measurements of Residual Stresses Obtained in Turning of Ti6Al4V. 4th CIRP International Conference on High Performance Cutting 2010, 313-318.
37. Afazov S.M., Becker A.A., Hyde T.H. Effects of Micro-stresses From Machining and Shot-peening Processes on Fatigue Life. International Journal of Advanced Manufacturing Technology. 2010, 51:711-722.
38. S. Afazov, Simulation of Manufacturing Processes and Manufacturing Chains Using Finite Element Techniques, PhD Thesis, University of Nottingham, 2009.
39. Ewins D.J. Control of Vibration and Resonance in Aero Engines and Rotating Machinery: An Overview. International Journal of Pressure Vessels and Piping 2010, 87:504-551.