A theoretical and computational model for isotropic elastoplastic stress analysis in shells at large strains

Computer Methods in Applied Mechanics and Engineering

Volumn 155, Issue 3-4, 1998, Pages 193-233

  Miehe, Christian ^a  

^a UNIVERSITY OF STUTTGART   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; COMPUTER AIDED ANALYSIS; DEFORMATION; EIGENVALUES AND EIGENFUNCTIONS; ELASTOPLASTICITY; FINITE ELEMENT METHOD; SHELLS (STRUCTURES); STRAIN; STRESS ANALYSIS; TENSORS; VARIATIONAL TECHNIQUES;

ELASTOPLASTIC ANALYSIS; PARAMETRIZATION; PLASTICITY THEORY; SHELL THEORY;

COMPUTER SIMULATION;

EID: 0032025970     PISSN: 00457825     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0045-7825(97)00149-7     Document Type: Article

References (67)

1. S. Ahmad, B.M. Irons and O.C. Zienkiewics, Analysis of thick and thin shell structures by curved finite elements, Int. J. Numer. Methods Engrg. 2 (1970) 419-451.
2. U. Andelfinger and E. Ramm, EAS-elements for two-dimensional, three-dimensional, plate and shell structures and their equivalence to HR-elements, Int. J. Numer. Methods Engrg. 36 (1943) 1311-1337.
3. S.S. Antman, Ordinary differential equations of nonlinear elasticity. I: Foundations of the theories of non-linearly rods and shells, Archive Rat. Mech. Anal. 61 (1976) 307-351.
4. S.S. Antman, Nonlinear Problems of Elasticity (Springer Verlag, New York, 1995).
5. J.H. Argyris, An excursion into large rotations, Comput. Methods Appl. Mech. Engrg. 32 (1982) 88-155.
6. Y. Basar and W.B. Krätzig, Mechanik der Flächentragwerke (Friedrich Vieweg and Sohn, Braunschweig/Wiesbaden 1985).
7. Y. Basar and Y. Ding, Finite-rotation elements for the nonlinear analysis of thin shell structures, Int. J. Solids Struct. 26 (1990) 83-97.
8. K.J. Bathe and E.N. Dvorkin A four-node plate bending element based on Mindlin-Reissner plate theory and mixed interpolation, Int. J. Numer. Methods Engrg. 21 (1985) 367-383.
9. P. Betsch and E. Stein, An assumed strain approach avoiding artificial thickness straining for a nonlinear 4-node shell element, Comm. Appl. Numer. Methods 11 (1995) 899-909.
10. P. Betsch, F. Gruttmann and E. Stein. A 4-node finite shell element for the implementation of general hyperelastic 3D-elasticity at finite strains, Comput. Methods Appl. Mech. Engrg. 130 (1996) 57-79.
11. N. Büchter and E. Ramm, 3D-extension of nonlinear shell equations based on the enhanced assumed strain concept, Comput. Methods Appl. Sciences (1992) 55-62.
12. N. Büchter and E. Ramm, Shell theory versus degeneration - A comparison in large rotation finite element analysis, Int. J. Numer. Methods Engrg. 34 (1992) 39-59.
13. N. Büchter, E. Ramm and D. Roehl, Three-dimensional extension of nonlinear shell formulation based on the enhanced assumed strain concept, Int. J. Numer. Methods Engrg. 37 (1994) 2551-2568.
14. J. Chroscielewski, J. Makowski and H. Stumpf, Genuinely resultant shell finite elements accounting for geometric and material nonlinearity, Int. J. Numer. Methods Engrg. 35 (1992) 63-94.
15. A.M. Cuitiño and M. Ortiz, A material-independent method for extending stress update algorithms from small-strain plasticity to finite plasticity with multiplicative kinematics, Engrg Comput. 9 (1992) 437-451.
16. E.N. Dvorkin and K.J. Bathe, A continuum mechanics based four-node shell element for general nonlinear analysis, Engrg Comput., 1 (1984) 77-88.
17. J.L. Ericksen and C. Truesdell, Exact theory of stress and strain in rods and shells, archive of rational mechanics and analysis 4 (1958) 295-323.
18. A.L. Eterovic and K.J. Bathe, A hyperelastic-based large strain elasto-plastic constitutive formulation with combined isotropic-kinematic hardening using the logarithmic stress and strain measures, Int. J. Numer. Methods Engrg. 30(6) (1990) 1099-1115.
19. A.E. Green and W. Zerna, Theoretical Elasticity (Clarendon Press, Oxford, 1954).
20. A.E. Green and P.M. Naghdi, A general theory of an elasto-plastic continuum, Archive of Rational Mechanics and Analysis, 18 (1965) 251-281.
21. F. Gruttmann, E. Stein and P. Wriggers, Theory and numerics of thin elastic shells with finite rotations, Ingenieur Archiv 59 (1989) 54-67.
22. T.J.R Hughes and W.K. Liu, Nonlinear finite element anaylsis of shells, Part I: Three-dimensional shells, Comput. Methods Appl. Mech. Engrg. 26 (1981) 331-362.
23. T.J.R. Hughes and E. Carnoy, Nonlinear finite element shell formulation accounting for large membrane strains, Comput. Methods Appl. Mech. Engrg. 39 (1983) 69-82.
24. A. Ibrahimbegović, Equivalent spatial and material descriptions of finite deformation elastoplasticity in principal axes, Int. J. Solids Struct. 31 (1994) 3027-3040.
25. A. Ibrahimbegović, Finite elastoplastic deformations of space-curved membranes, Comput. Methods Appl. Mech. Engrg. 119 (1994) 371-394.
26. A. Kühhorn and H. Schoop, A nonlinear theory for sandwich shells including the wrinkling phenomenon, Archive Appl. Mech. 62 (1992) 413-427.
27. J. Kratochvil, On a finite strain theory of elastic-inelastic materials, Acta Mechanica 16 (1973) 127-142.
28. E.H. Lee, Elastic-plastic deformation at finite strains, ASME J. Appl. Mech. 36 (1969) 1-6.
29. J. Lubliner, Plasticity Theory (Macmillan Publishing Company, New York, 1990).
30. J. Mandel, Plasticité Classique et Viscoplasticité, CISM Courses and Lectures No. 97 (Springer-Verlag, Wien, 1972).
31. C. Miehe, On the representation of Prandtl-Reuss tensors within the framework of multiplicative elasto-plasticity, Int. J. Plasticity 10 (1994) 609-621.
32. C. Miehe, Aspects of the formulation and finite element implementation of large strain isotropic elasticity, Int. J. Numer. Methods Engrg. 37 (1994) 1981-2004.
33. C. Miehe, Comparison of two algorithms for the computation of fourth-order isotropic tensor functions, Comput. Struct., in press.
34. C. Miehe, Entropic thermoelasticity at finite strains. Aspects of the formulation and numerical implementation, Comput. Methods Appl. Mech. Engrg. 120 (1995) 243-269.
35. C. Miehe, A theory of large-strain isotropic thermoplasticity based on metric transformation tensors, Archive Appl. Mech. 66 (1995) 413-427.
36. C. Miehe, Multisurface thermoplasticity for single crystals at large strains in terms of Eulerian vector updates, Int. J. Solids Struct. 33 (1996) 1981-2004.
37. C. Miehe, A constitutive frame of anisotropic elastoplasticity at large strains based on the notion of a plastic metric, formulated in terms of isotropic tensor functions in Lagrangian and Eulerian geometric representation, Int. J. Solids Struct., in press.
38. C. Miehe, A formulation of finite elastoplasticity based on dual co-and contra-variant Eigenvector triads normalized with respect to a plastic metric, Comput. Methods Appl. Mech. Engrg., in press.
39. C. Miehe, Numerical computation of algorithmic (consistent) tangent moduli in large-strain computational inelasticity, Comput. Methods Appl. Mech. Engrg., 134 (1996) 223-240.
40. P.M. Naghdi, The theory of plates and shells, in: C. Truesdell, ed., Mechanics of Solids II, Encyclopedia of Physics, Vol. VIa (1972), S. Flügge, ed. (Springer, Berlin, Heidelberg, New York) 425-640.
41. H. Parisch, Large displacements of shells including material nonlinearities, Comput. Methods Appl. Mech. Engrg. 27 (1981) 183-214.
42. H. Parisch, An investigation of a finite rotation four node assumed strain shell element, Int. J. Numer. Methods Engrg. 31 (1991) 127-150.
43. H. Parisch, A continuum-based shell theory for nonlinear applications, Int. J. Numer. Methods Engrg. 38 (1995) 1855-1883.
44. 0 shell element based on assumed natural strains, J. Appl. Mech., 53 (1986) 278-290.
45. D. Perić, D.R.J. Owen and M.E. Honnor, A model for finite strain elasto-plasticity based on logarithic strains: Computational issues, Comput. Methods Appl. Mech. Engrg. 94 (1992) 35-61.
46. E. Ramm, Geometrisch nichtlineare Elastostatik und Finite Elemente, Institut für Baustatik, Universität Stuttgart, Bericht Nr.76-2, Stuttgart, 1976.
47. E. Ramm and A. Matzenmiller, Large deformation shell analysis based on the degeneration concept, in: T.J.R. Hughes, E. Hinton eds., Finite Element Methods for Plate and Shell Structures (Pineridge Press, Swansea, 1986) 365-393.
48. D. Roehl and E. Ramm, Large elasto-plastic finite element analysis of solids and shells with the enhanced assumed strain concept, Int. J. Solids Struct. 33 (1996) 3215-3237.
49. C. Sansour, A theory and finite element formulation of shells at finite deformations including thickness change: Circumventing the use of a rotation tensor, Archive Appl. Mech., in press.
50. C. Sansour and H. Bufler, An Exact Finite Rotation Shell Theory, its Mixed Variational Formulation and its Finite Element Implementation, Int. J. Numer. Methods Engrg. 34 (1992) 73-115.
51. H. Schoop, Oberflächenorientierte Schalentheorien endlicher Verschiebungen, Ingenieur Archiv 56 (1986) 427-437.
52. H. Schoop, A Simple Nonlinear Flat Element for Large Displacement Structures, Comput. Struct. 32 (1989) 379-385.
53. B. Seifert, Zur Theorie und Numerik finiter elastoplastischer Deformationen von Schalenstrukturen, Bericht Nr.: I-2 des Institut für Mechanik (Bauwesen) der Universität Stuttgart, Stuttgart, 1996.
54. J.C. Simó, Algorithms for static and dynamic multiplicative plasticity that preserve the classical return mapping schemes of the infinitesimal theory, Comput. Methods Appl. Mech. Engrg. 99 (1992) 61-112.
55. J.C. Simó, D.D. Fox and M.S. Rifai, On a stress resultant geometrically exact shell model, Part III: Computational aspects of the nonlinear theory and Part IV: Variable thickness shells with through-the-thickness stretching, Comput. Methods Appl. Mech. Engrg. 79 (1990) 21-70 and 81 (1990) 91-126.
56. J.C. Simó, D.D. Fox and M.S. Rifai, On a stress resultant geometrically exact shell model, Part III: Computational aspects of the nonlinear theory and Part IV: Variable thickness shells with through-the-thickness stretching, Comput. Methods Appl. Mech. Engrg. 79 (1990) 21-70 and 81 (1990) 91-126.
57. J.C. Simó and C. Miehe, Associative coupled thermoplasticity at finite strains: Formulation, numerical analysis and implementation, Comput Methods Appl. Mech. Engrg. 98 (1992) 41-104.
58. J.C. Simó and J.G. Kennedy, On a stress resultant geometrically exact shell model, Part V: Nonlinear plasticity: Formulation and integration algorithms, Comput. Methods Appl. Mech. Engrg. 96 (1992) 133-171.
59. J.C. Simó and F. Armero, Geometrically nonlinear enhanced strain mixed methods and the method of incompatible modes, Int. J. Numer. Methods Engrg. 33 (1992) 1413-1449.
60. J.C. Simó, F. Armero and R.L. Taylor, Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems, Comput. Methods Appl. Mech. Engrg. 110 (1993) 359-386.
61. G.M. Stanley, K.C. Park and T.J.R. Hughes, Continuum-based resultant shell elements, in: T.J.R. Hughes, E. Hinton, eds., Finite Element Methods for Plate and Shell Structures (Pineridge Press, Swansea, 1986) 1-45.
62. H. Stumpf and J. Makowski, On large strain deformations of shells, Acta Mechanica 65 (1986) 153-168.
63. W. Wagner and F. Gruttmann, A simple finite rotation formulation for composite shell elements, Engrg Comput. 11 (1995) 145-176.
64. G. Weber and L. Anand, Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids, Comput. Methods Appl. Mech. Engrg. 79 (1990) 173-202.
65. P. Wriggers and F. Gruttmann, Thin shells with finite rotations formulated in biot-stresses: Theory and finite element formulation, Int. J. Numer. Methods Engrg. 36 (1993) 2049-2071.
66. P. Wriggers, R. Eberlein and S. Reese, A comparison of three-dimensional continuum and shell elements for finite plasticity, Int. J. Solids Struct. 33 (1996) 3309-3326.
67. O.C. Zienkiewicz and R.L. Taylor, The Finite Element Method, Vol. 1 (McGraw-Hill, London, 1989).