Influence of rotor geometry of an IPM motor on sensorless control feasibility

IEEE Transactions on Industry Applications

Volumn 43, Issue 1, 2007, Pages 87-96

  Bianchi, Nicola ^a   Bolognani, Silverio ^a  

^a UNIVERSITY OF PADOVA   (Italy)

Author keywords

High frequency signal injection; Interior permanent magnet (IPM) motor; Low speed sensorless control; Motor design optimization; Zero speed sensorless control

Indexed keywords

ELECTROMOTIVE FORCE; GEOMETRY; POSITION CONTROL; POSITION MEASUREMENT; ROTORS (WINDINGS); STATORS;

INTERIOR-PERMANENT-MAGNET (IPM) MOTOR; POSITION DETECTION; SENSORLESS CONTROL;

SYNCHRONOUS MOTORS;

EID: 33947241809     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2006.887317     Document Type: Article

References (35)

1. B. J. Brunsbach, G. Henneberger, and T. Klepsch, "Position controlled, permanent excited synchronous motor without mechanical sensors," in Proc. EPE Conf., Brighton, U.K., Sep. 1993, pp. 38-43.
2. P. L. Jansen and R. D. Lorenz, "Transducerless field orientation concepts employing saturation-induced saliencies in induction machines," IEEE Trans. Ind. Appl., vol. 32, no. 6, pp. 1380-1393, Nov./Dec. 1996.
3. S. Morimoto, K. Kawamoto, M. Sanada, and Y. Takeda, "Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Oct. 2001, vol. 4, pp. 2637-2644.
4. S. Bolognani, M. Zigliotto, and M. Zordan, "Extended-range pmsm sensorless speed drive based on stochastic filtering," IEEE Trans. Power Electron., vol. 16, no. 1, pp. 110-117, Jan. 2001.
5. N. R. Patel, T. O'Meara, J. Nagashima, and R. D. Lorenz, "Encoderless interior permanent magnet traction drive for electrical and hybrid electrical vehicles," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Sep. 30-Oct. 5, 2001, pp. 1703-1707.
6. A. B. Kulkarni and M. Ehsani, "A novel position sensor elimination technique for interior permanent-magnet synchronous drive," IEEE Trans. Ind. Appl., vol. 28, no. 1, pp. 144-150, Jan./Feb. 1992.
7. J. Kim and S. K. Sul, "New standstill position detection strategy for PMSM drive without rotational transducers," in Proc. IEEE APEC, Jun. 1994, pp. 363-369.
8. S. Ogasawara and H. Akagi, "An approach to real-time position estimation at zero and low speed for a PM motor based on saliency," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, San Diego, CA, Oct. 5-10, 1996, pp. 29-35.
9. Y. S. Jeong, R. D. Lorenz, T. M. Jahns, and S. K. Sul, "Initial rotor position estimation of an IPM synchronous machine using carrier-frequency injection methods," IEEE Trans. Ind. Appl., vol. 40, no. 1, pp. 38-45, Jan./Feb. 2005.
10. A. Consoli and A. Testa, "Sensorless control of PM synchronous motors at zero speed," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Phoenix, AZ, Oct. 3-7, 1999, pp. 1033-1040.
11. A. Consoli, and A. Testa, "A new zero frequency flux position detection approach for direct field oriented control drives," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Phoenix, AZ, Oct. 3-7, 1999, pp. 2290-2297.
12. F. Briz, A. Diez, and M. W. Degner, "Dynamic operation of carrier signal injection based sensorless, direct field oriented AC drives," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Phoenix, AZ, Oct. 3-7, 1999, pp. 2313-2320.
13. L. Wang and R. D. Lorenz, "Rotor position estimation for permanent magnet synchronous motor using saliency-tracking self-sensing method," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Rome, Italy, Oct. 8-12, 2000, pp. 445-450.
14. J. Ha, K. Ide, T. Sawa, and S. K. Sul, "Sensorless rotor position estimation of an interior permanent-magnet motor from initial states," IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 761-767, May/Jun. 2003.
15. H. Kim and R. D. Lorenz, "Carrier signal injection based sensorless control methods for IPM synchronous machine drives," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Seattle, WA, Oct. 3-7, 2004, pp. 977-984.
16. F. Briz, M.W. Degner, A. Diez, and R. D. Lorenz, "Measuring, modeling, and decoupling of saturation-induced saliencies in carrier signal injection-based sensorless AC drives," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Rome, Italy, Oct. 8-12, 2000, pp. 1842-1849.
17. F. Briz, M.W. Degner, A. B. Diez, and R. D. Lorenz, "Static and dynamic behavior of saturation-induced saliencies and their effect on carrier signal based sensorless AC drives," IEEE Trans. Ind. Appl., vol. 38, no. 3, pp. 670-678, May/Jun. 2002.
18. J. H. Jang, S. K. Sul, J. I. Ha, M. Ohto, and K. Ide, "Analysis of permanent magnet machine for sensorless control based on high frequency signal injection," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Salt Lake City, UT, Oct. 2003, pp. 592-598.
19. J. I. Ha, M. Ohto, J. H. Jang, and S. K. Sul, "Design and selection of AC machines for saliency-based sensorless control," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Pittsburgh, PA, Oct. 2002, vol. 2, pp. 1155-1162.
20. N. Bianchi, S. Bolognani, and M. Zigliotto, "Design hints of an IPM synchronous motor for an effective position sensorless control," in Proc. IEEE PESC, Jun. 12-16, 2005, pp. 1560-1566.
21. R. D. Lorenz and K. Van Patten, "High resolution velocity estimation for all digital, AC servo drives," IEEE Trans. Ind. Appl., vol. 27, no. 4, pp. 701-705, Jul./Aug. 1991.
22. M. Harke, H. Kim, and R. D. Lorenz, "Sensorless control of interior permanent magnet machine drives for zero-phase-lag position estimation," IEEE Trans. Ind. Appl., vol. 39, no. 12, pp. 1661-1667, Nov./Dec. 2003.
23. M. Linke, R. Kennel, and J. Holtz, "Sensorless speed and position control of synchronous machines using alternating carrier injection," in Proc. IEMDC, Madison, WI, Jun. 2-4, 2003, pp. 1211-1217.
24. A. Consoli, G. Scarcella, G. Tutino, and A. Testa, "Sensorless field oriented control using common mode currents," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Rome, Italy, Oct. 8-12, 2000, pp. 1866-1873.
25. J. H. Jang, S. K. Sul, and Y. C. Son, "Current measurement issues in sensorless control algorithm using high frequency signal injection method," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Salt Lake City, UT, Oct. 2003, pp. 1131-1141.
26. N. Bianchi, "Electrical machine analysis using finite elements," in Power Electronics and Applications Series. Boca Raton, FL: CRC Press, 2005.
27. N. Bianchi, M. Dai Pré, and S. Bolognani, "Design of a fault-tolerant IPM motor for electric power steering," in Proc. IEEE PESC, Jun. 12-16, 2005, p. 2873.
28. A. Vagati, M. Pastorelli, and G. Franceschini, "Effect of cross-coupling in synchronous reluctance motors," in Proc. Intell. Motion Conf., 1997, pp. 279-285.
29. A. Vagati, M. Pastorelli, G. Franceschini, and S. C. Petrache, "Design of low-torque-ripple synchronous reluctance motors," IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 758-765, Jul./Aug. 1998.
30. A. Vagati, M. Pastorelli, G. Franceschini, and F. Scapino, "Impact of cross saturation in synchronous reluctance motors of transverse-laminated type," IEEE Trans. Ind. Appl., vol. 36, no. 4, pp. 1039-1046, Jul./Aug. 2000.
31. N. Bianchi, S. Bolognani, and M. Zigliotto, "High performance PM synchronous motor drive for an electrical scooter," IEEE Trans. Ind. Appl., vol. 37, no. 5, pp. 1348-1355, Sep./Oct. 2001.
32. P. Guglielmi, M. Pastorelli, and A. Vagati, "Cross saturation effects in IPM motors and related impact on zero-speed sensorless control," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, Hong Kong, Oct. 2-6, 2005, vol. 4, pp. 2546-2552.
33. A. Fratta, A. Vagati, and F. Villata, "Permanent magnet assisted synchronous reluctance drive for constant-power application: Drive power limit," in Proc. Intell. Motion Eur. Conf., PCIM, Nürnberg, Germany, Apr. 1992, pp. 196-203.
34. N. Bianchi and S. Bolognani, "Parameters and volt-ampere ratings of synchronous motor drive for flux-weakening applications," IEEE Trans. Power Electron., vol. 12, no. 5, pp. 895-903, Sep. 1997.
35. T. M. Jahns, "IPM machine electrical analysis and performance," in Des. Anal. and Control Interior PM Synchronous Mach., IEEE IAS Tutorial Course Notes, IAS Annu. Meeting, Seattle, WA, 2005, pp. 2.1-2.22.