The effect of hardening laws and thermal softening on modeling residual stresses in FSW of aluminum alloy 2024-T3

Journal of Materials Processing Technology

Volumn 213, Issue 3, 2013, Pages 477-486

  Sonne, M R ^a   Tutum, C C ^a   Hattel, J H ^a   Simar, A ^b   De Meester, B ^b  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b UNIVERSITÉ CATHOLIQUE DE LOUVAIN   (Belgium)

Author keywords

Aluminum alloy 2024 T3; Finite element analysis; Friction stir welding; Hardening laws; Modeling residual stresses; Thermal softening

Indexed keywords

FINITE ELEMENT METHOD; FRICTION STIR WELDING; KINEMATICS; METALLURGY; NUMERICAL MODELS; RESIDUAL STRESSES; STRESS ANALYSIS;

2024-T3; FRICTION STIR; FRICTION STIR WELDS; HARDENING LAWS; HARDENING RULES; HEAT TRANSFER ANALYSIS; KINEMATIC HARDENING; QUASI-STATIC STRESS; SLITTING METHOD; SOFTENING BEHAVIOR; THERMAL SOFTENING; WELDING CONDITIONS;

HARDENING;

EID: 84869862682     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2012.11.001     Document Type: Article

References (44)

1. J. Altenkirch, A. Steuwer, P.J. Withers, S.W. Williams, M. Poad, and Wen SW Residual stress engineering in friction stir welds by roller tensioning Science and Technology of Welding and Joining 14 2 2009 185 192
2. The ASM Speciality Handbook: Aluminium and Aluminium Alloys, 1993.
3. A. Bastier, M.H. Maitournam, F. Roger, and K. Dang Van Modelling of the residual state of friction stir welded plates Journal of Materials Processing Technology 200 2008 25 37
4. B. Bhide, P. Michaleris, M. Posoda, and J. DeLoach Comparison of buckling distortion propensity for SAW, GMAW, and FSW Welding Journal 85 2006 189 195
5. G. Bussu, and P.E. Irving The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminum joints International Journal of Fatigue 25 2003 77 88
6. Y.J. Chao, and X. Qi Thermal and thermo-mechanical modeling of friction stir welding of aluminum alloy 6061-T6 Journal of Materials Processing and Manufacturing Science 7 1998 215 233
7. C.M. Chen, and R. Kovacevic Parametric finite element analysis of stress evolution during friction stir welding Proceedings of the Institution of Mechanical Engineers. Part B: Journal of Engineering Manufacture 220 8 2006 1359 1371
8. K. Deplus, A. Simar, W.V. Haver, and B. de Meester Residual stresses in aluminium alloy friction stir welds International Journal of Advanced Manufacturing Technology 56 2011 493 504
9. C.D. Donne, E. Lima, J. Wegener, A. Pyzalla, and T. Buslaps Investigations on residual stresses in friction stir welds 3rd International Symposium on Friction Stir Welding Kobe, Japan 2001
10. L. Dubourg, P. Doran, S. Larose, M.A. Gharghouri, and M. Jahazi Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters Materials Science Forum 638-642 2010 1215 1220
11. European Deepweld Project, 2008. Detail Multi-Physics Modelling of Friction Stir Welding, Final report.
12. Z. Feng, X. Wang, S.A. David, and P. Sklad Modeling of residual stresses and property distributions in friction stir welds of aluminum alloy 6061-T6 Science and Technology of Welding and Joining 12 4 2007 348 356
13. G. Fribourg, Y. Brechet, A. Deschamps, and A. Simar Microstructure-based modelling of isotropic and kinematicstrain hardening in a precipitation-hardened aluminium alloy Acta Materialia 59 2011 3621 3635
14. C. Genevois, A. Deschamps, A. Denquin, and B. Doisneau-cottignies Quantitative investigation of precipiatation and mechanical behaviour for AA2024 friction stir welds Acta Materialia 53 2005 2447 2458
15. A. Gerlich, P. Su, M. Yamamoto, and T.H. North Material flow and intermixing during dissimilar friction stir welding Science and Technology of Welding and Joining 13 2008 254 264
16. J.H. Hattel, K.L. Nielsen, and C.C. Tutum The effect of post-welding conditions in friction stir welds: from weld simulation to ductile failure European Journal of Mechanics A/Solids 2012 10.1016/j.euromechsol.2011.10.004
17. K. Inada, H. Fujii, Y.S. Ji, Y.F. Sun, and Y. Morisada Effect of gap on FSW joint formation and development of friction powder processing Science and Technology of Welding and Joining 15 2010 131 136
18. D. Jacquin, B. de Meester, A. Simar, D. Deloison, F. Montheillet, and C. Desrayaud A simple Eulerian thermomechanical modeling of friction stir welding Journal of Materials Processing Technology 211 1 2011 57 65
19. M.N. James, D.J. Hughes, Z. Chen, H. Lombard, D.G. Hattingh, D. Asquith, J.R. Yates, and P.J. Webster Residual stresses and fatigue performance Engineering Failure Analysis 14 2007 384 395
20. O. Hatamleh, I.V. Rivero, and J. Lyons Evaluation of surface residual stresses in friction stir welds due to laser and shot peening Journal of Materials Engineering and Performance 16 5 2007 549 553
21. L. Karlsson Thermal Stresses in Welding 1986 Department of Mechanical Engineering, Luleå University of Technology
22. Karlsson, L., Bergqvist, E.L., Larsson, H. 'Application of friction stir welding to dissimilar welding', Eurojoin 4 conference presentation, Dubrovnik, Croatia, May 24-26 2001. Available from: http://www.msm.cam.ac.uk/phase-trans/ 2004/fsw3/fsw3.htm (accessed 12.04.10).
23. M.Z.H. Khandkar, J.A. Khan, and A.P. Reynolds Prediction of temperature distribution and thermal history during friction stir welding: input torque based model Science and Technology of Welding and Joining 8 3 2003 165 174
24. C.Y. Lee, D.H. Choi, Y.M. Yeon, and S.B. Jung Dissimilar friction stir spot welding of low carbon steel and Al-Mg alloy by formation of IMCs Science and Technology of Welding and Joining 14 2009 216 220
25. T. Li, Q.Y. Shi, and H.K. Li Residual stresses simulation for friction stir welded joint Science and Technology of Welding and Joining 12 8 2007 634 640
26. T. Liyanage, J. Kilbourne, A.P. Gerlich, and T.H. North Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds Science and Technology of Welding and Joining 14 2009 500 508
27. A. Murphy, W. McCune, D. Quinn, and M. Price The characterization of friction stir welding process effects on stiffened panel buckling performance Thin-Walled Structure 45 2007 339 351
28. O.R. Myhr, and O. Grong Process modeling applied to 6082-T6 aluminum weldments. Part 1: Reaction kinetics. Part 2: Applications of model Acta Metal 39 11 1991 2693 2708
29. R. Nandan, B. Prabu, A. De, and T. DebRoy Improving reliability of heat transfer and fluid flow calculations during friction stir welding of dissimilar aluminium alloys Welding Journal 86 2007 313s-322s
30. D.A. Price, S.W. Williams, A. Wescott, J.C. Harrison, A. Rezai, A. Steuwer, M. Peel, StaronP, and M. Koak Distortion control in welding by mechanical tensioning Science and Technology of Welding and Joining 12 7 2007 620 633
31. M.B. Prime Residual stress measurement by successive extension of a slot: the crack compliance method Applied Mechanics Reviews 52 2 1999 75 96
32. D.G. Richards, P.B. Pragnell, S.W. Williams, and P.J. Withers 'Global mechanical tensioning for the management of residual stresses in welds' Materials Science and Engineering A A489 2008 351 362
33. D. Rosenthal The Theory of Moving Sources of Heat and Its Application to Metal Treatments 1946 The American Society of Mechanical Engineers
34. K. Satoh Transient thermal stress of weld heat affected zone by both-ends-fixed bar analogy Transactions of the Japan Welding Society 3 1972 125 134
35. H. Schmidt, and J. Hattel Thermal modelling of friction stirwelding Scripta Materialia 58 2008 332 337
36. Q. Shi, T. Dickerson, and H. Shercliff Proceedings of the 4th International Symposium on FSW TWI, Utah, USA 2003
37. A. Simar, T. Pardoen, and B. de Meester Effect of rotational material flow on temperature distribution in friction stir welds Science and Technology of Welding and Joining 12 4 2007 324 333
38. A. Simar, Y. Bréchet, B. de Meester, A. Denquin, C. Gallais, and T. Pardoen Integrated modeling of friction stir welding of 6xxx series Al alloys: process, microstructure and properties Progress in Materials Science 57 2012 95 183
39. A. Steuwer, M.J. Peel, and P.J. Withers Dissimilar friction stir welds in AA5083-AA6082: the effect of process parameters on residual stress Materials Science and Engineering A A441 2006 187 196
40. C.C. Tutum, and J.H. Hattel Optimization of process parameters in friction stir welding based on residual stress analysis: a feasibility study Science and Technology of Welding and Joining 15 5 2010 369 377
41. C.C. Tutum, H.B. Schmidt, and J. Hattel Assesment of benchmark cases for modeling of residual stresses and distortions in friction stir welding Proc. 7th Int. Symp. on 'Friction Stir Welding Awaji Island, Japan, May, TWI 2008
42. V. Tvergaard Plasticity and Creep in Structural Materials 2001 Department of Mechanical Engineering, Solid Mechanics, Technical University of Denmark
43. M. Yamamoto, A. Gerlich, T.H. North, and K. Shinozaki Cracking in dissimilar Mg alloy friction stir spot welds Science and Technology of Welding and Joining 13 2008 583 592
44. X.K. Zhu, and Y.J. Chao Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel Journal of Materials Processing Technology 146 2004 263 272