The effect of post-welding conditions in friction stir welds: From weld simulation to ductile failure

European Journal of Mechanics, A/Solids

Volumn 33, Issue , 2012, Pages 67-74

  Hattel, J H ^a   Nielsen, K L ^a   Tutum, C C ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Friction stir welding; Gurson modeling; Residual stresses; Thermo mechanical modeling

Indexed keywords

COMMERCIAL SOFTWARE; DUCTILE FAILURES; FINITE ELEMENT CODES; FRICTION STIR WELDED JOINTS; FRICTION STIR WELDS; IN-HOUSE CODES; IN-SITU; MATERIAL CONDITIONS; MODELING ANALYSIS; MODELING APPROACH; NUMERICAL MODELS; NUMERICAL STUDIES; PLASTIC FLOW LOCALIZATION; REMESHING; RESIDUAL STRESS STATE; STRESS STATE; STRESS STRAIN STATE; STRESS-STRAIN CONDITION; TENSILE CURVE; THERMALLY INDUCED STRESS; THERMOMECHANICAL MODEL; THERMOMECHANICAL MODELING; WELD LINES; WELD SIMULATION; WELDED PLATES;

ELASTICITY; FINITE ELEMENT METHOD; PLASTIC FLOW; RESIDUAL STRESSES; STRAIN; STRUCTURAL ANALYSIS; WELDED STEEL STRUCTURES; WELDING; WELDS;

FRICTION STIR WELDING;

EID: 84155173493     PISSN: 09977538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.euromechsol.2011.10.004     Document Type: Article

References (54)

1. J. Altenkirch, A. Steuwer, M. Peel, D.G. Richards, and P.J. Withers The effect of tensioning and sectioning on residual stresses in aluminum AA7749 friction stir welds Mater. Sci. Eng. A 488 2008 16 24 (Pubitemid 351712648)
2. ANSYS Manual, (version 11.0), 2007.
3. A. Bastier, M.H. Maitournam, K.D. Van, and F. Roger Steady state thermomechanical modelling of friction stir welding Sci. Technol. Weld. Join. 11 2006 278 288
4. A. Bastier, M.H. Maitournam, F. Roger, and K. Dang Van Modelling of the residual state of friction stir welded plates J. Mater. Process. Technol. 200 2008 25 37
5. B. Bhide, P. Michaleris, M. Posoda, and J. DeLoach Comparison of buckling distortion propensity for SAW, GMAW, and FSW Welding J. 2006 189 195
6. B. Budiansky Remarks on Theories of Solids and Structural Mechanics 1964 Harvard University, SIAM pp. 77-83
7. G. Bussu, and P.E. Irving The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminum joints Int. J. Fatigue 25 2003 77 88 (Pubitemid 35256037)
8. Y.J. Chao, and X. Qi Thermal and thermo-mechanical modeling of friction stir welding of aluminum alloy 6061-T6 J. Mater. Process. Manufacturing Sci. 7 1998 215 233 (Pubitemid 30514095)
9. Y.J. Chao, and X. Qi Heat transfer and thermo-mechanical analysis of friction stir joining of AA6061-T6 plates Proceedings of the First International Symposium on Friction Stir Welding 1999 Rockwell Science Center Thousand Oaks, California
10. C.M. Chen, and R. Kovacevic Parametric finite element analysis of stress evolution during friction stir welding Proc. Inst. Mech. Engg. Part B. J. Eng. Manufact. 220 8 2006 1359 1371 (Pubitemid 46603682)
11. C.C. Chu, and A. Needleman Void nucleation effects in biaxially stretched sheets J. Eng. Mater. Technol. 102 1980 249 256 (Pubitemid 11484651)
12. L. Dubourg, P. Doran, S. Larose, M.A. Gharghouri, and M. Jahazi Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters Mater. Sci. Forum 638-642 2010 1215 1220
13. Z. Feng, X. Wang, S.A. David, and P. Sklad Modeling of residual stresses and property distributions in friction stir welds of aluminum alloy 6061-T6 Sci. Technol. Weld. Join. 12 4 2007 348 356 (9)
14. C. Gallais, A. Simar, D. Fabregue, A. Denquin, G. Lapasset, B. de Meester, Y. Bréchet, and T. Pardoen Multiscale analysis of the strength and ductility of AA 6056 aluminum friction stir welds Metall. Mater. Trans. A 38 2007 964 981 (Pubitemid 47007377)
15. A.L. Gurson Continuum theory of ductile rupture by void nucleation and growth. I. Yield criteria and flow rules for porous ductile media J. Eng. Mater. Technol. 99 1977 2 15
16. J. Hattel, H.N.B. Schmidt, and C.C. Tutum Thermomechanical modelling of friction stir welding, trends in welding research Proceedings of the 8th International Conference 2009 1 10
17. J. Hutchinson Finite Strain Analysis of Elastic-plastic Solids and Structures vol. 6 1973 Harvard University, AMD pp. 17-29
18. M.N. James, D.J. Hughes, D.G. Hattingh, G.R. Bradley, G. Mills, and P.J. Webster Fatig. Fract. Eng. Mater. Struct. 27 2004 187 202
19. M.N. James, D.J. Hughes, Z. Chen, H. Lombard, D.G. Hattingh, D. Asquith, J.R. Yates, and P.J. Webster Residual stresses and fatigue performance Eng. Fail. Anal. 14 2007 384 395 (Pubitemid 44514949)
20. M.Z.H. Khandkar, J.A. Khan, A.P. Reynolds, and M.A. Sutton Predicting residual thermal stresses in friction stir welded metals J. Mater. Process. Technol. 174 2006 195 203 (Pubitemid 44287892)
21. T. Li, Q.Y. Shi, and H.K. Li Residual stresses simulation for friction stir welded joint Sci. Technol. Weld. Join. 12 8 2007 634 640
22. W.D. Lockwood, B. Thomaz, and A.P. Reynolds Mechanical response of friction stir welded AA2024: experiment and modelling Mater. Sci. Eng. A 323 2002 348 353 (Pubitemid 34140483)
23. R.S. Mishra, and Z.Y. Ma Friction stir welding and processing Mater. Sci. Eng. A 50 2005 1 78
24. A. Murphy, W. McCune, D. Quinn, and M. Price The characterization of friction stir welding process effects on stiffened panel buckling performance Thin-Walled Struct. 45 2007 339 351 (Pubitemid 46813180)
25. O. Myhr, O. Grong, H. Fjaer, and C. Marioara Modelling of the microstructure and strength evolution in Al-Mg-Si alloys during multistage thermal processing Acta Mater. 52 2004 4997 5008
26. K.L. Nielsen Ductile damage development in friction stir welded aluminum (AA2024) joints Eng. Frac. Mech. 75 2008 2795 2811
27. K.L. Nielsen, T. Pardoen, V. Tvergaard, B. de Meester, and A. Simar Modelling of plastic flow localization and damage development in friction stir welded 6005A aluminium alloy using physics based strain hardening Int. J. Solids. Struct. 47 2010 2359 2370
28. K.L. Nielsen, and V. Tvergaard Effect of a shear modified Gurson model on damage development in a FSW tensile specimen Int. J. Solids Struct. 46 2009 587 601
29. L.D. Oosterkamp, P.J. Webster, P.A. Browne, G.B.M. Vaughan, and P.J. Withers Proc. 5th Eur. Conf. on 'Residual stresses' Mater. Sci. Forum 347-349 2000 687 693
30. M. Peel, A. Steuwer, M. Preuss, and P.J. Withers Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminum AA5083 friction stir welds Acta Mater. 51 2003 4791 4801
31. D.G. Richards, P.B. Pragnell, S.W. Williams, and P.J. Withers Global mechanical tensioning for the management of residual stresses in welds Mater. Sci. Eng. A 489 2008 351 362 (Pubitemid 351804163)
32. D.G. Richards, P.B. Prangnell, P.J. Withers, S.W. Williams, T. Nagy, and S. Morgan Simulation of the effectiveness of dynamic cooling for controlling residual stresses in friction stir welds 7th International Symposium Friction Stir Welding 2008 TWI
33. H. Schmidt, and J.H. Hattel A local model for the thermomechanical conditions in friction stir welding Modelling Simul. Mater. Sci. Eng. 13 1 2005 77 93 (Pubitemid 40121770)
34. H. Schmidt, and J. Hattel Thermal modelling of friction stir welding Scripta Mater. 58 2008 332 337
35. H. Schmidt, J. Hattel, and J. Wert An analytical model for the heat generation in friction stir welding Modelling Simul. Mater. Sci. Eng. 12 1 2004 143 157
36. Q. Shi, T. Dickerson, and H. Shercliff Proceedings of the 4th International Symposium on FSW 2003 TWI Utah, USA
37. A. Simar, Y. Bréchet, B. de Meester, A. Denquin, C. Gallais, and T. Pardoen Integrated modeling of friction stir welding of 6xxx series Al alloys: process, microstructure and properties Prog. Mater. Sci. 57 2012 95 183
38. A. Simar, Y. Bréchet, B. de Meester, A. Denquin, and T. Pardoen Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6 Acta Mater. 55 2007 6133 6143 (Pubitemid 47539234)
39. A. Simar, K.L. Nielsen, B. de Meester, T. Pardoen, and V. Tvergaard Strain hardening and damage in 6xxx series aluminum alloy friction stir welds Mater. Sci. Forum 638-642 2010 333 338
40. J.C. Simo, and T.J.R. Hughes Computational Inelasticity 1998 Springer
41. P. Staron, M. Kocak, and S. Williams Trends in Welding Research Proceedings 2003 Materials Park, OH, ASM International pp. 253-256
42. A. Steuwer, M.J. Peel, and P.J. Withers Dissimilar friction stir welds in AA5083-AA6082: the effect of process parameters on residual stress Mater. Sci. Eng. A 441 2006 187 196 (Pubitemid 44689065)
43. M.A. Sutton, A.P. Reynolds, D.-Q. Wang, and C.R. Hubbard A study of residual stresses and microstructure in 2024-T3 aluminum friction stir butt welds J. Eng. Mater. Technol. 124 2002 215 221 (Pubitemid 40000946)
44. C.C. Tutum, H.B. Schmidt, and J. Hattel Assessment of benchmark cases for modeling of residual stresses and distortions in friction stir welding 7th International Symposium Friction Stir Welding 2008 TWI
45. C.C. Tutum, and J.H. Hattel Optimization of process parameters in friction stir welding based on residual stress analysis: a feasibility study Sci. Technol. Weld. Join. 15 5 2010 369 377
46. V. Tvergaard Influence of voids on shear band instabilities under plane strain conditions Int. J. Frac. 17 1981 389 407 (Pubitemid 12441659)
47. V. Tvergaard Influence of void nucleation on ductile shear fracture at a free surface J. Mech. Phys. Solids 30 1982 399 425 (Pubitemid 13486500)
48. V. Tvergaard Material failure by void growth to coalescence Adv. Appl. Mech. 27 1990 83 151
49. V. Tvergaard On fatigue crack growth in ductile materials by crack-tip blunting J. Mech. Phys. Solids 52 2004 2149 2166
50. V. Tvergaard, and A. Needleman Analysis of the cup-cone fracture in a round tensile bar Acta Mater. 32 1984 157 169 (Pubitemid 14509228)
51. X.L. Wang, Z. Feng, S.A. David, S. Spooner, and C.R. Hubbard Proc. 6th Int. Conf. on 'Residual Stresses' 2000 IOM Oxford, UK
52. P.J. Webster, L.D. Oosterkamp, P.A. Browne, D.J. Hughes, W.P. Kang, P.J. Withers, and G.B.M. Vaughan J. Strain Anal. Eng. Design 36 2001 61 70
53. X.K. Zhu, and Y.J. Chao Effects of temperature-dependent material properties on welding simulation Comp. Struct. 80 2002 967 976 (Pubitemid 34614168)
54. X.K. Zhu, and Y.J. Chao Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel J. Mater. Process. Technol. 146 2004 263 272