Quantitative Analysis of Work Hardening and Dynamic Softening Behavior of low carbon alloy Steel Based on the Flow Stress

Materials and Design

Volumn 45, Issue , 2013, Pages 384-392

  Wang, Meng Han ^a   Li, Yu Feng ^a   Wang, Wen Hao ^a   Zhou, Jie ^a   Chiba, Akihiko ^b  

^a CHONGQING UNIVERSITY   (China)

^b TOHOKU UNIVERSITY   (Japan)

Author keywords

20MnNiMo steel; Activation volume; Dynamic recrystallization; Strain rate sensitivity; Work hardening

Indexed keywords

DYNAMIC RECRYSTALLIZATION; GRAIN BOUNDARIES; NUCLEAR REACTORS; PRESSURE VESSELS; STRAIN HARDENING;

ACTIVATION VOLUME; BEHAVIOR-BASED; COMPRESSION EXPERIMENTS; CRITICAL CONDITION; CROSS-SLIP; DEFORMATION CONDITIONS; DYNAMIC SOFTENING; EFFECTS OF TEMPERATURE; FLOW BEHAVIORS; HIGH-ACTIVATION; HOT FORMING PROCESS; LOW ACTIVATION; LOW CARBON; LOW STRAIN RATES; NUCLEAR PRESSURE VESSELS; ON FLOW; STRAIN CONDITIONS; STRAIN HARDENING RATE; STRAIN RATE SENSITIVITY; THERMO-MECHANICAL; ZENER-HOLLOMON PARAMETER;

STRAIN RATE;

EID: 84867774052     PISSN: 02613069     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2012.08.041     Document Type: Article

References (42)

1. Sheng Zhongqi, Xiao Hong, Peng Feng, Zou Min Refinement of grain structure in 20MnNiMo steel. China Nucl Technol Report 1997, 1-8.
2. Zhang Meng, Luo Yingming Development of large thickness 20MnNiMo steel plate from rolling instead of forging. Wide Heavy Plate 2011, 17.
3. Zhong Zhiping The model of post-dynamic recrystallization of 20MnMoNi55 steel. J Plast Eng 2000, 7:23-26.
4. Zhang Xianhui The characteristics of welding hydrogen crack in 20MnNiMo steel. Trans China Weld Inst. 2002, 23:23-25.
5. Saimoto S., Diak B.J. Strain rate sensitivity of ultra-low carbon steels. Mater Sci Eng 2001, A319-321:294-298.
6. Momenia A., Dehghani K., Ebrahimi G.R. Modeling the initiation of dynamic recrystallization using a dynamic recovery model. J Alloy Compd 2011, 509:9387-9393.
7. Najafizadeh A., Jonas J.J. Predicting the critical stress for initiation of dynamic recrystallization. ISIJ Int 2006, 46:1679-1684.
8. Fan X.G., Yang H., Sun Z.C., Zhang D.W. Quantitative analysis of dynamic recrystallization behavior using a grain boundary evolution based kinetic model. Mater Sci Eng A 2010, 527:5368-5377.
9. Dehghan-Manshadi A., Barnett M.R., Hodgson P.D. Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation. Mater Sci Eng A 2008, 485:664-672.
10. Cingara A., Mcqueen H.J. New formula for calculating flow curves from high temperature constitutive data for 300 austenitic steels. J Mater Process Technol 1992, 36:31-42.
11. Kugler G., Turk R. Modeling the dynamic recrystallization under multi-stage hot deformation. Acta Mater 2004, 52:4659-4668.
12. Chen X.H., Lu X.L. Work hardening of ultrafine-grained copper with nanoscale twins. Scripta Mater 2007, 57:133-136.
13. HB 7571-1997. Compression test methods of metal at high temperature. Institute of China Aviation Industry Corporation; 1997/1.
14. Taylor A.S., Hodgson P.D. Dynamic behavior of 304 stainless steel during high Z deformation. Mater Sci Eng A 2011, 528:3310-3320.
15. Mirzadeh H., Najafizadeh A. The rate of dynamic recrystallization in 17-4 PH stainless steel. Mater Design 2010, 31:4577-4583.
16. Zeng Zhouyu, Chen Liqing, Zhu Fuxian, Liu Xianghua Dynamic recrystallization behavior of a heat-resistant martensitic stainless steel 403Nb during hot deformation. J Mater Sci Technol 2011, 27:913-919.
17. Spigarelli S., Evangelista E., McQueen H.J. Study of hot workability of a heat treated AA6082 aluminum alloy. Scripta Mater 2003, 49:179-183.
18. Deng Ying, Yin Zhimin, Huang Jiwu Hot deformation behavior and micro-structural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature. Mater Sci Eng A 2011, 528:1780-1786.
19. Uvira J.L., Jones J.J. Hot compression of Armco iron and silicon steel. Trans Metall Soc AIME 1968, 242:1619-1626.
20. Hamed Mirzadeh, Abbas Najafizadeh, Mohammad Moazeny Flow curve analysis of 17-4 PH stainless steel under hot compression test. Metall Mater Trans A 2009, 40:2950-2958.
21. Mirzadeh H., Cabrera J.M., Prado J.M., Najafizadeh A. Hot deformation behavior of a medium carbon microalloyed steel. Mater Sci Eng A 2011, 528:3876-3882.
22. Huang Xudong, Zhang Hui, Han Yi., Wenxiang Wu, Chen Jianghua Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature. Mater Sci Eng A 2010, 527:485-490.
23. 33w/AZ91D composite during hot compression and its validation. Comput Mater Sci 2011, 50:2422-2426.
24. McQueen H.J., Ryan N.D. Constitutive analysis in hot working. Mater Sci Eng A 2002, 43-63.
25. Zhang Hui, Zhang Honggang, Li Luoxing Hot deformation behavior of Cu-Fe-P alloys during compression at elevated temperatures. J Mater Process Technol 2009, 209:2892-2896.
26. Gao W., Belyakov A. Dynamic recrystallization of copper polycrystals with different purities. Mater Sci Eng A 1999, 265:233-239.
27. Shen Y.F., Lu L., Dao M., Suresh S. Strain rate sensitivity of Cu with nanoscale twins. Scripta Mater 2006, 55:319-322.
28. Ryan N.D., McQueen H.J. Flow stress, dynamic restoration, strain hardening and ductility in hot working of 316 steel. J Mater Process Technol 1990, 2:177-199.
29. Roters F., Raabe D., Gottstein G. Work hardening in heterogeneous alloys-a microstructural approach based on three internal state variables. Acta Mater 2000, 48:4181.
30. Men Han Wang, Wen Hao Wang, Jie Zhou, et al. Strain effects on microstructure behavior of 7050-H112 aluminum alloy during hot compression. J Mater Sci 2012, 47:3131-3139.
31. Esmaeili S., Cheng L.M., Deschamps A., Lloyd D.J., Poole W.J. The deformation behavior of AA6111 as a function of temperature and precipitation state. Mater Sci Eng A 2001, 319-321:461-465.
32. Chen Fei, Cui Zhenshan, Chen Shijia Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: Dynamic recrystallization. Mater Sci Eng A 2011, 528:5073-5080.
33. Beynon J.H., Sellars C.M. Modeling microstructure and its effects during multi-pass hot rolling. ISIJ Int 1992, 32:359-367.
34. Medina S.F., Hernandez C.A. Modelling of the dynamic recrystallization of austenite in low alloy and microalloyed steels. Acta Mater 1996, 44:165.
35. Zhouyu Zeng, et al. Dynamic recrystallization behavior of a heat-resistant martensitic stainless steel 403Nb during hot deformation. J Mater Sci Technol 2011, 27:913-991.
36. Ding R., Guo Z.X. Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization. Acta Mater 2001, 49:3163.
37. Luo J., Li M.Q. Strain rate sensitivity and strain hardening exponent during the isothermal compression of Ti60 alloy. Mater Sci Eng A 2012, 538:156-163.
38. Dalla Torre F.H., Pereloma E.V., Davies C.H.J. Strain hardening behavior and deformation kinetics of Cu deformed by equal channel angular extrusion from 1 to 16 passes. Acta Mater 2006, 54:1135-1146.
39. Wang Y.M., Hamza A.V., Ma E. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni. Acta Mater 2006, 54:2715-2726.
40. Tao Suo, Yu-long Li, Kui Xie, Feng Zhao, Ke-Shi Zhang, Qiong Deng Experimental investigation on strain rate sensitivity of ultra-fine grained copper at elevated temperatures. Mech Mater 2011, 43:111-118.
41. Shaban M., Eghbali B. Determination of critical conditions for dynamic recrystallization of a microalloyed steel. Mater Sci Eng A 2010, 527:4320-4325.
42. Püschl W. Models for dislocation cross-slip in close-packed crystal structures: a critical review. Prog Mater Sci 2002, 47:415-461.