The evolution of cell printing

Fundamentals of Tissue Engineering and Regenerative Medicine

Volumn , Issue , 2009, Pages 613-631

  Ringeisen, Bradley R ^a   Othon, Christina M ^a   Barron, Jason A ^b   Wu, Peter K ^c   Spargo, Barry J ^a  

^a NAVAL RESEARCH LABORATORY   (United States)

^b Stern   (United States)

^c SOUTHERN OREGON UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84867399170     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-540-77755-7_43     Document Type: Chapter

References (91)

1. An YH (2001) Regaining chondrocyte phenotype in thermo-reversible gel culture. Anat Rec 263:336
2. Ashkin A (1970) Acceleration and trapping of particles by radiation pressure. PRL 24:156
3. Azuma N, Akasaka N, Kito H, et al (2001) Role of p38 MAP kinase in endothelial cell alignment induced by fuid shear stress. Am J Physiol Heart Circ Physiol 280:H189
4. Barron J, Young H, Dlott D, et al (2005) Printing of protein microarrays via a capillary-free fuid jetting mechanism. Proteomics 5:4138
5. Barron JA, Ringeisen BR, Kim H, et al (2004) Application of laser printing to mammalian cells. Thin Solid Films 453-454:383
6. Barron JA, Rosen R, Jones-Meehan J, et al (2004) Biological laser printing of genetically modifed Escheri-chia coli for biosensor applications. Biosens Bioelectron 20:246
7. Barron JA, Spargo BJ, Ringeisen BR (2004) Biological laser printing of three dimensional cellular structures. Appl Phys A Mater Sci Process 79:1027
8. Barron JA, Wu P, Ladouceur HD, et al (2004) Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns. Biomed Microdevices 6:139
9. Barron JA, Krizman David B, Ringeisen BR (2005) Laser printing of single cells: statistical analysis, cell viability, and stress. Ann Biomed Eng 33:121
10. Bocanegra R, Galan D, Marquez M, et al (2005) Multiple electrosprays emitted from an array of holes. J Aerosol Sci 36:1387
11. Boland T, Mironov V, Gutowska A, et al (2003) Cell and organ printing 2: fusion of cell aggregates in three-dimensional gels. Anat Rec A Discov Mol Cell Evol Biol 272:497
12. Boland T, Xu T, Damon B, et al (2006) Application of inkjet printing to tissue engineering. Biotechnol J 1:1910
13. Chen CY, Barron JA, Ringeisen BR (2006) Cell patterning without chemical surface modifcation: cell-cell interacftions between bovine aortic endothelial cells (BAEC) on a homogeneous cell-adherent hydrogel. Appl Surf Sci 252:8641
14. Chen VJ, Ma PX (2004) Nano-fbrous poly(l-lactic acid) scaffolds with interconnected spherical macropores. Biomaterials 25:2065
15. Chrisey D, Pique A, McGill R, et al (2003) Laser deposition of polymer and biomaterial flms. Chem Rev 103:553
16. Colina M, Serra P, Fernandez-Pradas JM, et al (2005) DNA deposition through laser induced forward transfer. Biosens Bioelectron 20:1638
17. Cortesini R (2005) Stem cells, tissue engineering and or-ganogenesis in transplantation. Transpl Immunol 15:81
18. Eagles PAM, Qureshi AN, Jayasinghe SN (2006) Elec-trohydrodynamic jetting of mouse neuronal cells. Bio-chem J 394:375
19. Fernandez-Pradas JM, Colina M, Serra P, et al (2004) Laser-induced forward transfer of biomolecules. Thin Solid Films 453-454:27
20. Flickinger M, Schottel J, Bond D, et al (2007) Painting and printing living bacteria. Biotechnol Prog 23:2
21. Guduru S, Narasimhan S, Birchfeld S, et al (2005) Analysis of neurite outgrowth for a laser patterned neuronal culture. Proceedings of the 2nd International IEEE EMBS Special Topic Conference on Neural Engineering, 2005, Arlington, VA
22. Hood BL, Darfer MM, Guiel TG, et al (2005) Proteomic analysis of formalin-fxed prostate cancer tissue. Mol Cell Proteomics 4:1741
23. Hopp B, Smausz T, Kresz N, et al (2005) Survival and proliferative ability of various living cell types after laser-induced forward transfer. Tissue Eng 11:1817
24. Humes H (2005) Stem cells: the next therapeutic frontier. Trans Am Clin Climatol Assoc 116:167
25. Jayasinghe S, Townsend-Nicholson A (2006) Bio-elec-trosprays: the next generation of electrifed jets. Biotech-nol J 1:1018
26. Jayasinghe S, Townsend-Nicholson A (2006) Stable elec-tric-feld driven cone-jetting of concentrated biosuspensions. Lab Chip 6:1086
27. Jayasinghe SN, Eagles PAM, Qureshi AN (2006) Electric feld driven jetting: an emerging approach for processing living cells. Biotechnol J 1:86
28. Jayasinghe SN, Qureshi AN, Eagles PAM (2006) Elec-trohydrodynamic jet processing: an advanced electric-feld-driven jetting phenomenon for processing living cells. Small 2:216
29. Jeong B, Gutowska A (2002) Lessons from nature: stimuli-responsive polymers and their biomedical applications. Trends Biotechnol 20:305
30. Kesari P, Xu T, Boland T (2005) Layer-by-layer printing of cells and its application to tissue engineering. Mater Res Soc Symp Proc 845:111
31. Khalil S, Nam J, Sun W (2005) Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds. Rapid Prototyping J 11:9
32. Kim S, Utsunomiya H, Koski J, et al (1998) Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels. Ann Surg 228:8
33. Koegler W, Griffth L (2004) Osteoblast response to PLGA tissue engineering scaffolds with PEO modifed surface chemistries and demonstration of patterned cell response. Biomaterials 25:2819
34. Konig K, Tadir Y, Patrizio P, et al (1996) Effects of ultraviolet exposure and near infrared laser tweezers on human spermatozoa. Hum Reprod 11:2162
35. Landers R, Hubner U, Schmelzeisen R, et al (2002) Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. Biomaterials 23:4437
36. Lee KY, Mooney DJ (2001) Hydrogels for tissue engineering. Chem Rev 101:1869
37. Lee KY, Peters MC, Mooney DJ (2001) Controlled drug delivery from polymers by mechanical signals. Adv Mater (Weinheim, Germany) 13:837
38. Leong K, Cheah C, Chua C (2003) Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. Biomaterials 13:2363
39. Liang H, Vu K, Krishnan P, et al (1996) Wavelength dependence of cell cloning effciency after optical trapping. Biophys J 70:1529
40. Loscertales G (2002) Micro/nano encapsutation via elec-trifed coaxial liquid jets. Science 295:1695
41. Ma PX (2004) Scaffolds for tissue fabrication. Mater Today 7:30
42. Ma PX, Choi J-W (2001) Biodegradable polymer scaffolds with well-defned interconnected spherical pore network. Tissue Eng 7:23
43. Ma PX, Zhang R (1999) Synthetic nanoscale fbrous extracellular matrix. J Biomed Mater Res 46:60
44. Merrin J, Leibler S, Chuang J (2007) Printing multistrain bacterial patterns with a piezoelectric inkjet printer. PLoS ONE 2:e663
45. Miller ED, Fisher GW, Weiss LE, et al (2006) Dose-dependent cell growth in response to concentration modulated patterns of FGF-2 printed on fbrin. Biomaterials 27:2213
46. Mironov V, Boland T, Trusk T, et al (2003) Organ printing: computer-aided jet-based 3D tissue engineering. Trends Biotechnol 21:157
47. Mironov V, Markwald RR, Forgacs G (2003) Organ printing: self-assembling cell aggregates as "bioink". Sci Med 9:69
48. Mironov V, Boland T, Trusk T, et al (2004) Organ printing: computer-aided jet-based 3D tissue engineering. [Erratum to document cited in CA140:038057]. Trends Biotechnol 22:265
49. Murugan R, Ramakrishna S (2006) Review article: nano-featured scaffolds for tissue engineering: a review of spinning methodologies. Tissue Eng 12:435
50. Nakamura M (2004) Application of inkjet technology for tissue engineering. Bio Industry 21:68
51. Nakamura M, Kobayashi A, Takagi F, et al (2005) Biocompatible inkjet printing technique for designed seeding of individual living cells. Tissue Eng 11:1658
52. Norman J, Desai T (2006) Methods for fabrication of nanoscale topography for tissue engineering scaffolds. Ann Biom Eng 34:89
53. Odde DJ, Renn MJ (1999) Laser-guided direct writing for applications in biotechnology. Trends Biotechnol 17:385
54. Odde DJ, Renn MJ (2000) Laser-guided direct writing of living cells. Biotechnol Bioeng 67:312
55. Odenwälder P, Irvine S, McEwan J, et al (2007) Bio-electrosprays: a novel electrifed jetting methodology for the safe handling and deployment of primary living organisms. Biotechnol J 2:622
56. Oishi Y, Taniguchi K, Matsumoto H, et al (2003) Differential responses of HSPs to heat stress in slow and fast regions of rat gastrocnemius muscle. Muscle Nerve 28:587
57. Othman S, Xu H, Royston T, et al (2005) Microscopic magnetic resonance elastography (microMRE). Magn Reson Med 54:605
58. Pardo L, Boland T (2003) Characterization of patterned self-assembled monolayers and protein arrays generated by teh ink-jet method. Langmuir 19:1462
59. Paull T, Fleming J (1990) Upregulation of E. coli 39kDa proteins induced by glutaraldehyde and formaldehyde. Curr Microbiol 21:117
60. Ringeisen BR, Chrisey DB, Pique A, et al (2001) Generation of mesoscopic patterns of viable Escherichia coli by ambient laser transfer. Biomaterials 23:161
61. Ringeisen B, Wu P, Kim H, et al (2002) Picoliter-scale protein microarrays by laser direct write. Biotechnol Prog 18:1126
62. Ringeisen BR, Barron JA, Spargo BJ (2004) Novel seeding mechanisms to form multilayer heterogeneous cell constructs. Mater Res Soc Symp Proc EXS-1:105
63. Ringeisen BR, Kim H, Barron JA, et al (2004) Laser printing of pluripotent embryonal carcinoma cells. Tissue Eng 10:483
64. Ringeisen B, Othon C, Barron J, et al (2006) Jet-based methods to print living cells. Biotechnol J 1:930
65. Roth EA, Xu T, Das M, et al (2004) Ink-jet printing for high-throughput cell patterning. Biomaterials 25:3707
66. Sabatini D, Bensch K, Barrnett R (1963) Cytochemistry and electron microscopy. J Cell Biol 17:19
67. Saltzman WM (2004) Tissue Engineering: Engineering Principles for the Design of Replacement Organs and Tissues (1st edn). Oxford University Press New York, USA
68. Saunders R, Bosworth L, Gough J, et al (2004) Selective cell delivery for 3D tissue culture and engineering. Eur Cells Mater 7:84
69. Saunders R, Derby B, Gough J, et al (2004) Ink-jet printing of human cells. Mater Res Soc Symp Proc EXS-1:95
70. Saunders R, Gough J, Derby B (2005) Ink jet printing of mammalian primary cells for tissue engineering applications. Mater Res Soc Symp Proc 845:57
71. Shea L, Smiley E, Bonadio J, et al (1999) DNA delivery from polymer matrices for tissue engineering. Nature Biotechnology 17:551
72. Smith CM, Stone AL, Parkhill RL, et al (2004) Three-dimensional bioassembly tool for generating viable tissue-engineered constructs. Tissue Eng 10:1566
73. Sumerel J, Lewis J, Doraiswamy A, et al (2006) Pizo-electric ink jet processing of materials for medical and biological applications. Biotechnol J 1:976
74. Sun W, Lal P (2002) Recent developments on computer aided tissue engineering, a review. Comput Methods Programs Biomed 67:85
75. Taylor P, Sachlos E, Dreger S, et al (2006) Interaction of human valve interstitial cells with collagen matrices manufactured using rapid prototyping. Biomaterials 27:2733
76. Tazi K, Barriere E, Moreau R, et al (2002) Role of shear stress in aortic eNOS up-regulation in rats with biliary cirrhosis. Gastroenterology 122:1869
77. Townsend-Nicholson A, Jayasinghe S (2006) Cell elec-trospinning: a unique biotechnique for encapsulating living organisms for generating active biological micro-threads/scaffolds. Biomacromolecules 7:3364
78. Vasita R, Katti D (2006) Growth factor-delivery systems for tissue engineering: a materials perspective. Expert Rev Med Devices 3:29
79. Vozzi G, Flaim C, Ahluwalia A, et al (2003) Fabrication of PLGA scaffolds using soft lithography and microsy-ringe deposition. Biomaterials 24:2533
80. Wang X, Yan Y, Pan Y, et al (2006) Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system Tissue Eng 12:83
81. Watanabe K, Miyazaki T, Matsuda R (2003) Growth factor array fabrication using a color ink jet printer. Zoolog Sci 20:429
82. Williams D, Sebastine I (2005) Tissue engineering and regenerative medicine: manufacturing challenges. IEE Proc Nanobiotechnol 152:207
83. Wilson WC Jr, Boland T (2003) Cell and organ printing 1: protein and cell printers. Anat Rec A Discov Mol Cell Evol Biol 272:491
84. Woodfeld T, Malda J, de Wijn J, et al (2004) Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fber-deposition technique. Biomaterials 25:4149
85. Xu T, Gregory CA, Molnar P, et al (2006) Viability and electrophysiology of neural cell structures generated by the inkjet printing method. Biomaterials 27:3580
86. Xu T, Jin J, Gregory C, et al (2005) Inkjet printing of viable mammalian cells. Biomaterials 26:93
87. Yan Y, Wang X, Pan Y, et al (2005) Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique. Biomaterials 26:5864
88. Yang S, Leong K, Du Z, et al (2002) The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng 8:1
89. Yang SF, Leong KF, Du ZH, et al (2002) The design of scaffolds for use in tissue engineering. Part 1. Traditional factors. Tissue Eng 7:679
90. Young D, Auyeung R, Piqué A, et al (2001) Time resolved optical microscopy of a laser-based forward transfer process. Appl Phys Lett 78:3139
91. Zandonella C (2001) New body parts at the stroke of a laser pen. New Sci 170:24