Axial laminar flow of viscoplastic fluids in a concentric annulus subject to wall slip

Rheologica Acta

Volumn 51, Issue 9, 2012, Pages 805-820

  Kalyon, Dilhan M ^a,b   Malik, Moinuddin ^a  

^a STEVENS INSTITUTE OF TECHNOLOGY   (United States)

^b Stevens Institute of Technology   (United States)

Author keywords

Analytical solution; Annular flow; Herschel Bulkley fluid; Viscoplastic; Wall slip

Indexed keywords

EID: 84865749190     PISSN: 00354511     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00397-012-0641-y     Document Type: Article

References (77)

1. Allende M, Kalyon D (2000) Assessment of particle-migration effects in pressure-driven viscometric flows. J Rheol 44(1): 79-90.
2. Aral BK, Kalyon DM (1994) Effects of temperature and surface roughness on time-dependent development of wall slip in steady torsional flow of concentrated suspensions. J Rheol 38: 957-972.
3. Aral BK, Kalyon DM (1995) Rheology and extrudability of very concentrated suspensions: effects of vacuum imposition. Plast Rubber Compos Process Appl 24: 201-210.
4. Awati KM, Park Y, Weisser E, Mackay ME (2000) Wall slip and shear stresses of polymer melts at high shear rates without pressure and viscous heating effects. J Non-Newton Fluid Mech 89: 117-131.
5. Bert CW, Malik M (1996) The differential quadrature method in computational mechanics. App Mech Rev 49: 1-28.
6. Bird RB, Stewart WE, Lightfoot EN (2002) Transport phenomena. Wiley, New York.
7. Brochard F, de Gennes PG (1992) Shear dependent slippage at polymer/solid interface. Langmuir 8: 3033-3037.
8. Brochard-Wyart F, Gay C, de Gennes PG (1996) Slippage of polymer melts on grafted surfaces. Macromolecules 29: 377-382.
9. Brunn P, Abu-Jdayil B (2007) Axial annular flow of plastic fluids: dead zones and plug-free flow. Rheol Acta 46(4): 449-454.
10. Chatzimina M, Georgiou G, Housiadas K, Hatzikiriakos SG (2009) Stability of the annular Poiseuille flow of a Newtonian liquid with slip along the walls. J Non-Newton. Fluid Mech 159: 1-9.
11. Chen Y, Kalyon DM, Bayramli E (1993) Effects of surface roughness and the chemical structure of materials of construction on wall slip behavior of linear low density polyethylene in capillary flow. J Appl Polym Sci 50: 1169-1177.
12. Civan F, Sliepcevich CM (1984) Application of differential quadrature to transport processes. J Math Anal Appl 93: 206-221.
13. Cohen Y, Metzner AB (1985) An analysis of apparent slip flow of polymer solutions. J Rheol 29: 67.
14. Denn MM (2001) Extrusion instabilities and wall slip. Annual Rev Fluid Mech 33: 265-287.
15. Escudier MP, Gouldson IW (1995) Concentric annular flow with centerbody rotation of a Newtonian and a shear-thinning liquid. Int J Heat Fluid Flow 16: 156-162.
16. Escudier MP, Gouldson IW, Oliveira PJ, Pinho FT (2000) Effects of inner cylinder rotation on laminar flow of a Newtonian fluid through an eccentric annulus. Int J Heat Fluid Flow 21: 92-103.
17. Escudier MP, P. J. Oliveira PJ, Pinho FT, Smith S (2002a) Fully developed laminar flow of non-Newtonian liquids through annuli: comparison of numerical calculations with experiments. Exp Fluids 33: 101-111.
18. Escudier MP, P. J. Oliveira PJ, Pinho FT (2002b) Fully developed laminar flow of purely viscous non-Newtonian liquids through annuli, including the effects of eccentricity and inner-cylinder rotation. Int J Heat Fluid Flow 23: 52-73.
19. Fredrickson AG, Bird RB (1958) Non-Newtonian flow in annuli. J Ind Eng Chem 50: 347-352.
20. Gadala-Maria F, Acrivos A (1980) Shear-induced structure in a concentrated suspension of solid spheres. J Rheol 24: 799-814.
21. Gevgilili H, Kalyon DM (2001) Step strain flow: wall slip effects and other error sources. J Rheol 45: 1-9.
22. Gotsis AD, Ji Z, Kalyon DM (1990) 3-D analysis of the flow in co-rotating twin screw extruders. SPE ANTEC Technical Papers 36: 139-142.
23. Halliday PJ, Smith AC (1995) Estimation of wall slip velocity in the capillary flow of potato granule pastes. J Rheol 39: 139-149.
24. Hanks RW (1979) The axial laminar flow of yield-pseudoplastic fluids in a concentric annulus. Ind Eng Chem Process Des Dev 18: 488-493.
25. Hanks RW, Larsen KM (1979) The flow of power-law non-Newtonian fluids in concentric annuli. Ind Eng Chem Fundam 18: 33-35.
26. Hatzikiriakos SG, Dealy JM (1991) Wall slip of molten high density polyethylene. I. Sliding plate rheometer studies. J Rheol 35: 497-523.
27. Hatzikiriakos SG, Dealy JM (1992) Wall slip of molten high density polyethylene. II. Capillary rheometer studies. J Rheol 36: 703-741.
28. Huilgol RR, You, Z (2005) Application of the augmented Lagrangian method to steady pipe flows of Bingham, Casson and Herschel-Bulkley fluids. J Non-Newton. Fluid Mech 128: 126-143.
29. Jana SC, Kapoor B, Acrivos A (1995) Apparent wall slip velocity coefficients in concentrated suspensions of noncolloidal particles. J Rheol 39: 1123-1132.
30. Jiang TQ, Young AC, Metzner AB (1986) The rheological characterization of HPG gels: measurement of slip velocities in capillary tubes. Rheol Acta 25: 397.
31. Kalika DS, Denn MM (1987) Wall slip and extrudate distortion in linear low density polyethylene. J Rheol 31: 815-834.
32. Kalyon DM, Lawal A, Yazici R, Yaras P, Railkar S (1999) Mathematical modeling and experimental studies of twin-screw extrusion of filled polymers. Polym Eng Sci 39: 1139-1151.
33. Kalyon DM, Gokturk H, Yaras P, Aral B (1995) Motion analysis of development of wall slip during die flow of concentrated suspensions. Society of Plastics Engineers ANTEC Technical Papers 41: 1130-1134.
34. Kalyon D, Gevgilili H (2003) Wall slip and extrudate distortion of three polymer melts. J Rheol 47: 683-699.
35. Kalyon D (2005) Apparent slip and viscoplasticity of concentrated suspensions. J Rheol 49: 621-640.
36. Kalyon DM, Tang H (2007) Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip. J Non-Newton. Fluid Mech 143: 133-140.
37. Kalyon D (2010) An analytical model for steady coextrusion of viscoplastic fluids in thin slit dies with wall slip. Polym Eng Sci 50: 652-664.
38. Krieger IM (1994) Axial flow through a narrow annulus. I. The kinetic energy correction. J Rheol 38: 141.
39. Kwon TH, Ahn SY (1995) Slip characterization of powder/binder mixtures and its significance in the filling process analysis of powder injection molding. Pow Tech 85: 45-55.
40. Lawal A, Kalyon DM, Yilmazer U (1993) Extrusion and lubrication flows of viscoplastic fluids with wall slip. Chem Eng Commun 122: 127.
41. Lawal A, Kalyon DM (1994a) Single screw extrusion of viscoplastic fluids subject to different slip coefficients at screw and barrel surfaces. Polym Eng Sci 34: 1471-1479.
42. Lawal A, Kalyon DM (1994b) Nonisothermal model of single screw extrusion of generalized Newtonian fluids. Numer Heat Tranf A 26: 103-121.
43. Lawal A, Kalyon DM (1998) Squeezing flow of viscoplastic fluids subject to wall slip. Polym Eng 38: 1793-1804.
44. Leger L, Hervet H, Massey G (1997) The role of attached polymer molecules in wall slip. Trends Polym Sci 5: 40-45.
45. Leighton D, Acrivos A (1987) The shear-induced migration of particles in concentrated suspensions. J Fluid Mech 181: 415-439.
46. Malik M, Civan F (1995) A comparative study of differential quadrature and cubature methods vis-a-vis some conventional techniques in context of convection-diffusion-reaction problems. Chem Eng Sci 50: 531-547.
47. Martin PJ, Wilson DI, Bonnett PE (2004) Rheological study of a talc-based paste for extrusion-granulation. J Eur Ceram Soc 24: 3155-3168.
48. Meeker SP, Bonnecaze RT, Cloitre M (2004a) Slip and flow in pastes of soft particles: direct observation and rheology. J Rheol 48: 1295-1320.
49. Meeker SP, Bonnecaze RT, Cloitre M (2004b) Slip and flow in soft particle pastes. Phys Rev Lett 92: 198302-1-4.
50. Meuric OF, Wakeman RJ, Chiu TW, Fisher KA (1998) Numerical flow simulation of viscoplastic fluids in annuli. Can J Chem Eng 76: 27-40.
51. Migler KB, Herve H, Leger L (1993) Slip transition of a polymer melt under shear stress. Phys Rev Lett 70: 287-290.
52. Mitsuishi N, Aoyagi Y (1973) Non-Newtonian fluid flow in an eccentric annulus. J Chem Eng Jpn 6: 402-408.
53. Mooney M (1931) Explicit formulas for slip and fluidity. J Rheol 2: 210-222.
54. Münstedt H, Schmidt M, Wassner E (2000) Stick and slip phenomena during extrusion of polyethylene melts as investigated by laser-Doppler velocimetry. J Rheol 44: 413-427.
55. Navier C (1823) Memoire sur les lois du mouvement des fluids. Mem Acad R Sci Inst France 6: 389-340.
56. Nott RP, Brady JF (1994) Pressure-driven flow of suspensions: simulations and theory. J Fluid Mech 275: 157-199.
57. Nouar C, Desaubry C, Zenaidi H (1998) Numerical and experimental investigation of thermal convection for a thermodependent Herschel-Bulkley fluid in an annular duct with rotating inner cylinder. Eur J Mech B17: 875-900.
58. Nouri JM, Umur H, Whitelaw JH (1993) Flow of Newtonian and non-Newtonian fluids in concentric and eccentric annuli. J Fluid Mech 253: 617-641.
59. Nouri JM, Whitelaw JH (1994) Flow of Newtonian and non-Newtonian fluids in a concentric annulus with rotation of the inner cylinder. J Fluids Eng 116: 821-827.
60. Person TJ, Denn MM (1997) The effect of die materials and pressure-dependent slip on the extrusion of linear low-density polyethylene. J Rheol 41: 249-265.
61. Phillips RJ, Armstrong RC, Brown RA, Graham AL, Abbott JR (1992) A constitutive equation for concentrated suspensions that accounts for shear-induced particle migration. Phys Fluids A4: 30-40.
62. Poyiadji S, Georgiou GC, Kaouri K, Housiadas KD (2012) Perturbation solutions of weakly compressible Newtonian Poiseuille flows with Navier slip at the wall. Rheol Acta. doi: 10. 1007/s00397-012-0618-x.
63. Ramamurthy AV (1986) Wall slip in viscous fluids and influence of materials of construction. J Rheol 30: 337-357.
64. Reiner M (1960) Deformation, strain and flow. H. K. Lewis & Co, London.
65. Reilly FJ, Price WL (1961) Plastic flow in injection molds. SPE J 1097-1101.
66. Tang HS, Kalyon D (2004) Estimation of the parameters of Herschel-Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers. Rheol Acta 43: 180-88.
67. Tang HS, Kalyon DM (2008a) Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip. J Rheol 52: 507-526.
68. Tang HS, Kalyon DM (2008b) Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: ramifications on development of flow instabilities. J Rheol 52: 1069-1090.
69. Tang HS (2012) Analysis on creeping flows of compressible fluids subject to wall slip. Rheol Acta 51: 421-439.
70. Tetlow N, Graham AL, Ingber MS, Subia SR, Mondy LA, Altobelli SA (1998) Particle migration in a Couette apparatus: experiment and modeling. J Rheol 42: 307-327.
71. Tiu C, Bhattacharyya S (1974) Developing and fully developed velocity profiles for inelastic power-law fluids in an annulus. AIChE J 20: 1140-1144.
72. Vand V (1948) Viscosity of solutions and suspensions: I. Theory. J Phys Colloid Chem 52: 277-314.
73. Vinogradov GV, Ivanova LI (1967) Viscous properties of polymer melts and elastomers exemplified by ethylene-propylene copolymer. Rheol Acta 6: 209-222.
74. White JL, Han H, Nakajima N, Brzoskowski R (1991) The influence of materials of construction on biconical rotor and capillary measurements of shear viscosity of rubber and its compounds and considerations of slippage. J Rheol 35: 167-189.
75. Yilmazer U, Kalyon DM (1989) Slip effects in capillary and parallel disk torsional flows of highly filled suspensions. J Rheol 33: 1197-1212.
76. Yoshimura A, Prud'homme RK (1988) Wall slip corrections for Couette and parallel disk viscometers. J Rheol 32: 53-67.
77. Zhang W, Silvi N, Vlachopoulos J (1995) Modelling and experiments of squeezing flow of polymer melts. Int Polym Process 155-164.