Degradable amorphous scaffolds with enhanced mechanical properties and homogeneous cell distribution produced by a three-dimensional fiber deposition method

Journal of Biomedical Materials Research - Part A

Volumn 100 A, Issue 10, 2012, Pages 2739-2749

  Sun, Yang ^a   Finne Wistrand, Anna ^a   Albertsson, Ann Christine ^a   Xing, Zhe ^b   Mustafa, Kamal ^b   Hendrikson, Wim J ^c   Grijpma, Dirk W ^d,e   Moroni, Lorenzo ^c  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b UNIVERSITY OF BERGEN   (Norway)

^c UNIVERSITY OF TWENTE   (Netherlands)

^d MIRA Institute for Biomedical Technology and Technical Medicine   (Netherlands)

^e UNIVERSITY MEDICAL CENTER GRONINGEN   (Netherlands)

Author keywords

3D fiber deposition method; aliphatic polyester; amorphous degradable copolymer; cell distribution; scaffold

Indexed keywords

3D FIBER DEPOSITION; ALIPHATIC POLYESTER; AMORPHOUS POLYMERS; CELL DISTRIBUTION; CELL MORPHOLOGY; COMPRESSIVE STIFFNESS; DECOMPOSITION TEMPERATURE; FIBER DEPOSITION; HIGH TEMPERATURE; HUMAN OSTEOBLAST-LIKE CELLS; IN-VITRO; INTERCONNECTIVITY; POLY(LACTIDE-CO-CAPROLACTONE); SALT-LEACHING METHOD; TENSILE STIFFNESS;

BIOMATERIALS; BIOMECHANICS; CELL PROLIFERATION; CELLS; CYTOLOGY; FLUORESCENCE MICROSCOPY; LEACHING; SCAFFOLDS; SCANNING ELECTRON MICROSCOPY; STIFFNESS; THREE DIMENSIONAL;

SCAFFOLDS (BIOLOGY);

POLY(LACTIDE CO CAPROLACTONE); POLYMER; UNCLASSIFIED DRUG;

ARTICLE; CELL ADHESION; CELL STRUCTURE; CELLULAR DISTRIBUTION; FLUORESCENCE MICROSCOPY; HIGH TEMPERATURE; HUMAN; HUMAN CELL; IN VITRO STUDY; MICRO-COMPUTED TOMOGRAPHY; MOLECULAR WEIGHT; OSTEOBLAST; POROSITY; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; THERMOSTABILITY; TISSUE ENGINEERING;

BIODEGRADATION, ENVIRONMENTAL; CELLS, CULTURED; COMPRESSIVE STRENGTH; ELASTIC MODULUS; HUMANS; MATERIALS TESTING; MECHANICAL PHENOMENA; MOLECULAR WEIGHT; OSTEOBLASTS; PROPIDIUM; STAINING AND LABELING; TEMPERATURE; TENSILE STRENGTH; TIME FACTORS; TISSUE ENGINEERING; TISSUE SCAFFOLDS;

EID: 84865630684     PISSN: 15493296     EISSN: 15524965     Source Type: Journal    
DOI: 10.1002/jbm.a.34210     Document Type: Article

References (36)

1. Odelius K, Plikk P, Albertsson AC,. Elastomeric hydrolyzable porous scaffolds: Copolymers of aliphatic polyesters and a polyether-ester. Biomacromolecules 2005; 6: 2718-2725. (Pubitemid 41388285)
2. DÃnmark S, Finne-Wistrand A, Schander K, Hakkarainen M, Arvidson K, Mustafa K, Albertsson A,. In vitro and in vivo degradation profile of aliphatic polyesters subjected to electron beam sterilization. Acta Biomater 2011; 7: 2035-2046.
3. Idris SB, DÃnmark S, Wistrand AF, Arvidson K, Albertsson AC, Bolstad AI, Mustafa K,. Biocompatibility of polyester scaffolds with fibroblasts and osteoblast-like cells for bone tissue engineering. J Bioact Compat Polym 2010; 25: 567-583.
4. Xing Z, Xue Y, DÃnmark S, Schander K, Ostvold S, Arvidson K, Hellem S, Finne Wistrand A, Albertsson AC, Mustafa K,. Effect of endothelial cells on bone regeneration using poly(L -lactide-co-1, 5 dioxepan 2 one) scaffolds. J Biomed Mater Res A 2011; 96: 349-357.
5. DÃnmark S, Finne-Wistrand A, Wendel M, Arvidson K, Albertsson AC, Mustafa K,. Osteogenic differentiation by rat bone marrow stromal cells on customized biodegradable polymer scaffolds. J Bioact Compat Polym 2010; 25: 207.
6. Edlund U, DÃnmark S, Albertsson AC,. A strategy for the covalent functionalization of resorbable polymers with heparin and osteoinductive growth factor. Biomacromolecules 2008; 9: 901-905. (Pubitemid 351560481)
7. Hutmacher DW, Schantz JT, Lam CXF, Tan KC, Lim TC,. State of the art and future directions of scaffold-based bone engineering from a biomaterials perspective. J Tissue Eng Regen Med 2007; 1: 245-260.
8. Mikos AG, Thorsen AJ, Czerwonka LA, Bao Y, Langer R, Winslow DN, Vacanti JP,. Preparation and characterization of poly(L -lactic acid) foams. Polymer 1994; 35: 1068-1077.
9. Whang K, Thomas C, Healy K, Nuber G,. A novel method to fabricate bioabsorbable scaffolds. Polymer 1995; 36: 837-842.
10. Nam YS, Park TG,. Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation. J Biomed Mater Res 1999; 47: 8-17. (Pubitemid 29344964)
11. Yoshimoto H, Shin Y, Terai H, Vacanti J,. A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering. Biomaterials 2003; 24: 2077-2082. (Pubitemid 36298779)
12. Peltola SM, Melchels FPW, Grijpma DW, Kellomäki M,. A review of rapid prototyping techniques for tissue engineering purposes. Ann Med 2008; 40: 268-280. (Pubitemid 351563939)
13. Saito E, Liao EE, Hu WW, Krebsbach PH, Hollister SJ,. Effects of designed PLLA and 50: 50 PLGA scaffold architectures on bone formation in vivo. J Tissue Eng Regen Med 2011.
14. Cooke MN, Fisher JP, Dean D, Rimnac C, Mikos AG,. Use of stereolithography to manufacture critical sized 3D biodegradable scaffolds for bone ingrowth. J Biomed Mater Res B 2003; 64: 65-69. (Pubitemid 37517140)
15. Williams JM, Adewunmi A, Schek RM, Flanagan CL, Krebsbach PH, Feinberg SE, Hollister SJ, Das S,. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 2005; 26: 4817-4827. (Pubitemid 40347312)
16. Moroni L, Schotel R, Hamann D, de Wijn JR, van Blitterswijk CA,. 3D fiber deposited electrospun integrated scaffolds enhance cartilage tissue formation. Adv Funct Mater 2008; 18: 53-60. (Pubitemid 351143399)
17. Papadimitropoulos A, Riboldi S, Tonnarelli B, Woodruff MA, Hutmacher DW, Martin I,. A collagen network phase improves cell seeding of open-pore structure scaffolds under perfusion. J Tissue Eng Regen Med 2011.
18. Griffith LG, Wu B, Cima MJ, Powers MJ, Chaignaud B, Vacanti JP,. In vitro organogenesis of liver tissues. Ann NY Acad Sci 1997; 831: 382-397.
19. Cima MJ,., Sachs E,., Cima LG,., Yoo J,., Khanuja S,., Borland SW,., Wu BM,., Giordano RA,. Computer-derived microstructure by 3D Printing: Bio- and Structural Materials. Solid Freeform Fabr. Symp. Proc. Univ. of Texas, Austin, TX, 1994; p 181-190.
20. Sun W, Starly B, Darling A, Gomez C,. Computer aided tissue engineering: Application to biomimetic modelling and design of tissue scaffolds. Biotechnol Appl Biochem 2004; 39: 49-58. (Pubitemid 38200934)
21. Malda J, Woodfield TBF, Van Der Vloodt F, Kooy F, Martens DE, Tramper J, Blitterswijk CA, Riesle J,. The effect of PEGT/PBT scaffold architecture on oxygen gradients in tissue engineered cartilaginous constructs. Biomaterials 2004; 25: 5773-5780. (Pubitemid 38624457)
22. Moroni L, De Wijn J, Van Blitterswijk C,. 3D fiber-deposited scaffolds for tissue engineering: Influence of pores geometry and architecture on dynamic mechanical properties. Biomaterials 2006; 27: 974-985. (Pubitemid 41566689)
23. Martins A, Chung S, Pedro AJ, Sousa RA, Marques AP, Reis RL, Neves NM,. Hierarchical starch-based fibrous scaffold for bone tissue engineering applications. J Tissue Eng Regen Med 2009; 3: 37-42.
24. Tanaka Y, Yamaoka H, Nishizawa S, Nagata S, Ogasawara T, Asawa Y, Fujihara Y, Takato T, Hoshi K,. The optimization of porous polymeric scaffolds for chondrocyte/atelocollagen based tissue-engineered cartilage. Biomaterials 2010; 31: 4506-4516.
25. Yen HJ, Tseng CS, Hsu S, Tsai CL,. Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen. Biomed Microdevices 2009; 11: 615-624.
26. Woodfield TBF, Malda J, De Wijn J, Peters F, Riesle J, Van Blitterswijk CA,. Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. Biomaterials 2004; 25: 4149-4161. (Pubitemid 38388579)
27. Schuurman W, Khristov V, Pot M, van Weeren P, Dhert W, Malda J,. Bioprinting of hybrid tissue constructs with tailorable mechanical properties. Biofabrication 2011; 3: 021001.
28. Xue Y, DÃnmark S, Xing Z, Arvidson K, Albertsson AC, Hellem S, Finne Wistrand A, Mustafa K,. Growth and differentiation of bone marrow stromal cells on biodegradable polymer scaffolds: An in vitro study. J Biomed Mater Res A 2010; 95: 1244-1251.
29. Idris SB, Arvidson K, Plikk P, Ibrahim S, Finne-Wistrand A, Albertsson AC, Bolstad AI, Mustafa K,. Polyester copolymer scaffolds enhance expression of bone markers in osteoblast-like cells. J Biomed Mater Res A 2010; 94: 631-639.
30. Beresford J, Gallagher J, Poser J, Russell R,. Production of osteocalcin by human bone cells in vitro. Effects of 1, 25 (OH) 2D3, 24, 25 (OH) 2D3, parathyroid hormone, and glucocorticoids. Metab Bone Disease Relat Res 1984; 5: 229-234. (Pubitemid 14069656)
31. Mustafa K, Wroblewski J, Lopez BS, Wennerberg A, Hultenby K, Arvidson K,. Determining optimal surface roughness of TiO2 blasted titanium implant material for attachment, proliferation and differentiation of cells derived from human mandibular alveolar bone. Clin Oral Implants Res 2001; 12: 515-525. (Pubitemid 33723190)
32. Mustafa K, Wroblewski J, Hultenby K, Silva Lopez B, Arvidson K,. Effects of titanium surfaces blasted with TiO2 particles on the initial attachment of cells derived from human mandibular bone. Clin Oral Implants Res 2000; 11: 116-128.
33. Stjerndahl A, Finne Wistrand A, Albertsson AC, Bäckesjö CM, Lindgren U,. Minimization of residual tin in the controlled Sn (II) octoate catalyzed polymerization of caprolactone. J Biomed Mater Res A 2008; 87: 1086-1091.
34. Yilgor P, Sousa RA, Reis RL, Hasirci N, Hasirci V,. 3D plotted PCL scaffolds for stem cell based bone tissue engineering. Macromol Symp 2008; 269: 92-99.
35. Sivalingam G, Madras G,. Thermal degradation of binary physical mixtures and copolymers of poly(-caprolactone), poly(,-lactide), poly (glycolide). Polym Degrad Stab 2004; 84: 393-398.
36. Wintermantel E, Mayer J, Blum J, Eckert KL, Luscher P, Mathey M,. Tissue engineering scaffolds using superstructures. Biomaterials 1996; 17: 83-91. (Pubitemid 26031364)