Tissue engineering scaffolds using superstructures

Biomaterials

Volumn 17, Issue 2, 1996, Pages 83-91

  Wintermantel, E ^a   Mayer, J ^a   Blum, J ^a   Eckert, K L ^a   Luscher P ^a   Mathey, M ^a  

^a ETH ZURICH   (Switzerland)

Author keywords

Cell carriers; Scaffold engineering; Superstructures; Tissue engineering

Indexed keywords

BIOCOMPATIBILITY; CELLS; FABRICS; IMPLANTS (SURGICAL); MECHANICAL PROPERTIES; POROSITY; POROUS MATERIALS; STRUCTURE (COMPOSITION); THREE DIMENSIONAL; TISSUE CULTURE;

CELL TO CELL CONTACT; SCAFFOLDS ENGINEERING; SUPERSTRUCTURES; TISSUE ENGINEERING;

TISSUE;

BIOMATERIAL;

ARTICLE; BIOENGINEERING; CELL CONTACT; CERAMICS; HUMAN; IMPLANT; OSTEOSYNTHESIS; PRIORITY JOURNAL; TISSUE GROWTH;

EID: 0030033718     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/0142-9612(96)85753-X     Document Type: Article

References (29)

1. Bissell MJ, Barcellos-Hoff MH. The influence of extracellular matrix on gene expression: is structure the message? J Cell Sci (Suppl) 1987; 8: 327.
2. Wintermantel E, Mayer J. Anisotropic biomaterials: strategies and developments for bone implants. In: Wise DL, Altobelli DE, Scwartz ER, eds. Encyclopedic Handbook of Biomaterials and Bioengineering. New York: M. Dekker Inc., 1995: 3-42 (in press).
3. Leuschner J, Rimpler M. Zellkulturen in der Toxikologie. In Vitro Systeme 1992; 8: 1-2.
4. Mayer J, Ruffieux K, Koch B, Wintermantel E, Schulten T, Hatebur A. The Double Die Technique (DDT): biomaterials processing for adaptable high fatigue resistance thermoplastic-carbon fiber ostheosynthesis plates. Biomed Engng Appl 1993; 5: 778-783.
5. Ruffieux K, Hintermann M, Mayer J, Wintermantel E. Enhanced local carbon fibre knitting reinforcement of isoelastic bone plates. Concept of a new implant. In: Textiles and Composites '92, VTT Technical Research Center of Finland, Espoo: 1992: 326-332.
6. Mayer J, Ruffieux K, Ha SW, Tognini R, Koch B, Wintermantel E. Knitted carbon fiber reinforced biocompatible thermoplastics: influence of structural parameters on manufacturing techniques and mechanical properties. In: Proc. Int. Symp. Adv. Materials Lightweight Structures, ESTEC, Nortwijk, NL: 1994: 351-358.
7. Mayer J. Gestricke aus Kohlenstoffasern für biokompatible Verbundwerkstoffe, dargestellt an einer homoelastischen Osteosyntheseplatte. Dissertation, ETH Zürich, 1994.
8. Mayer J, Ruffieux K, Tognini R, Wintermantel E. Knitted carbon fibers, a sophisticated textile reinforcement that offers new perspectives in thermoplastic composite processing. In: Bunsell AR, Kelly A, Massiah A, eds. Developments in the Science and Technology of Composite Materials. Abington, Cambridge, UK: Woodhead Publishing Ltd, 1993: 219-224.
9. Mayer J, Ha SW, de Haan J, Petitmermet M, Wintermantel E. Knitted carbon fiber reinforced biocompatible thermoplastics, mechanical properties and structure modelling. In: Bunsell AR, Kelly A, Massiah A, eds. Developments in the Science and Technology of Composite Materials. Woodhead Publishing Ltd, 1993: 637-642.
10. Karger-Kocsis J, Czigany T, Mayer J. Failure mode and damage development in knitted carbon fiber fabric reinforced polyethylmethacrylate. J Mater Sci (submitted).
11. Ko FK. Preform fiber architecture for ceramic-matrix composites. Ceram Bull 1989; 2: 401-414.
12. Ko FK, Whyte DW, Pastore CM. Control of fiber architecture for tough net-shaped structural composites. In: Proc. of MiCon86, Optimization of Processing, Properties, and Service Performance Through Microstructural Control (ASTM Special Technical Publication 979). Philadelphia: ASTM, 1986: 291-298.
13. Mayer J, Giorgetta S, Koch B, Wintermantel E, Padscheider J, Spescha G. Characterization of thermal oxidized carbon fiber surfaces by ESCA, wetting techniques and scanning probe microscopy and the interaction with polyethylenemethacrylate. Development of a biocompatible composite material. Composites 1994; 25: 763-769.
14. Mayer J, Ha SW, de Haan J, Wintermantel E. Knitted carbon fiber reinforced biocompatible composites. The influence of fiber/matrix interface on the mechanical properties. In: Proc. of Conference on Interfacial Phenomena in Composite Materials (IPCM 93). Oxford: Butterworth-Heinemann, 1993: 87.
15. Rudd CD, Owen MJ, Middleton V. Mechanical properties of weft glass fibre/polyester laminates. Comp Sci Technol 1990; 39: 261-277.
16. Chou S, Wu CJ. A study of the physical properties of epoxy resin composites with knitted glass fiber fabrics. J Reinforc Plastic Comp 1992; 11: 1239-1250.
17. Galetti PM, Aebischer P. Bioartificial organs. In: Skalak R, Fox CF, eds. Tissue Engineering. New York: Alan R Liss, 1988: 211-216.
18. Cohen S, Bano MC, Cima LG, Allock HR, Vacanti JP, Vacanti CA, Langer R. Design of synthetic polymer structures for cell transplantation and tissue engineering. Clin Mater 1993; 13: 3-10.
19. Wintermantel E, Cima L, Schloo B, Langer R. Angiopolarity: a new design parameter for cell transplantation devices and its application to degradable systems. In: Steiner R, Weiss P, Langer R, eds. Angiogenesis, Key Principles: Science, Technology, Medicine. Basel: Birkhaüser Publishers, 1992: 331-334
20. Bader A. Leberzellkulturen: Anspruch und Wirklichkeit - Verwendung primärer Hepathozythenkulturen als Ersatz zu Tierversuchen. In Vitro Systeme 1992; 7: 9-10.
21. Eckert KL, Rösler U, Mathey M, Mayer J, Wintermantel E, Hofmann H. Open porous ceramics for cell transplantation devices: a new biomaterial - first results. In: Ducheyne P, Christiansen D, eds. Bioceramics (Vol 6). Oxford: Butterworth-Heinemann, 1993: 251-255.
22. Eckert KL, Hofmann H, Wintermantel E. Contribution to the development of ceramic cell carrier materials. In: Ilschner B, Hofmann H, eds. Proc. 1st Swiss Conference on Materials Research for Engineering Systems. Bern, CH: Technische Rundschau, 1994: 185-189.
23. Mathey M, Meier C, Lüscher P, Mayer J, Wintermantel E, Koch B. A new intervertebral disc respacing biomaterial: open porous, hydroxyapatite filled polymethylmethacrylate. Biomed Engng Appl Commun 1993; 5: 334-339.
24. Klawitter JJ, Hulbert SF. Application of porous ceramics for the attachment of load bearing internal orthopaedic applications. J Biomed Mater Res Symp 1972; 7: 161.
25. Wake MC, Patrick CW, Mikos AG. Pore morphology effects on the fibrovascular tissue growth in porous polymer substrates. Cell Transplant 1994; 3: 339-343.
26. Zhang Z, King MW, Guidoin R, Therrien M, Pezolet M, Adnot A, Ukpabi P, Vantai MH. Morphological, physical and chemical evaluation of the Vascugraft arterial prosthesis: comparison of a novel polyurethane device with other microporous structures. Biomaterials 1994; 15: 483-500.
27. Hinrichs WLJ, Zweep HP, Satoh S, Feijen J, Wwilevuur CRH. Supporting, microporous, elastomeric degradable prostheses to improve the arterialization of autologous vein grafts. Biomaterials 1994; 2: 83-91.
28. Okumura M, Ohgushi H, Takakura Y, van Blitterswijk CA, Koerten HK. Analysis of primary bone formation in porous alumina: a fluorescence and scanning electron microscopic study of marrow cell induced osteogenesis. Bio-Medical Mater Engng 1992; 2: 191-201.
29. Benya PD, Brown PD. Modulation of chondrocyte phenotype in vitro. In: Kuettner KE, Schleyerbach R, Hascall VC, eds. Articular Cartilage Biochemistry. New York: Raven Press, 1986: 219-233.