An analytical elastic-perfectly plastic contact model

International Journal of Solids and Structures

Volumn 49, Issue 22, 2012, Pages 3129-3141

  Brake, M R ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

Constitutive behavior; Contact mechanics; Elastic plastic material; Impact testing; Indentation and hardness

Indexed keywords

CLASSICAL SOLUTIONS; COEFFICIENT OF RESTITUTION; COMPLIANCE CURVE; CONSTITUTIVE BEHAVIORS; CONTACT GEOMETRY; CONTACT MECHANICS; ELASTIC PROCESS; ELASTIC REGIME; ELASTIC-PERFECTLY PLASTICS; ELASTIC-PLASTIC; ELASTIC-PLASTIC BEHAVIOR; ELASTIC-PLASTIC DEFORMATION; ELASTIC-PLASTIC MATERIAL; ELASTIC-PLASTIC MODEL; EXPERIMENTAL MEASUREMENTS; FORCE-DISPLACEMENT RELATIONSHIPS; FULLY-PLASTIC; IMPACT STUDY; IMPACT VELOCITIES; MATERIAL PROPERTY; NORMAL DIRECTION; RADII OF CURVATURE; VON MISES YIELD CRITERION;

HARDNESS; IMPACT TESTING; UNLOADING;

ELASTOPLASTICITY;

EID: 84865494300     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2012.06.013     Document Type: Article

References (65)

1. E.J. Abbott, and F.A. Firestone Specifying surface quality: a method based on accurate measurement and comparison Mechanical Engineering 55 1933 569 572
2. J. Alcalá, A.E. Giannakopoulos, and S. Suresh Continuous measurements of load-penetration curves with spherical microindenters and the estimation of mechanical properties Journal of Materials Research 13 1998 1390 1400
3. J. Alcalá, and D.E. de los Ojos Reassessing spherical indentation: contact regimes and mechanical property extraction International Journal of Solids and Structures 47 2010 2714 2732
4. U.M. Ascher, S.J. Ruuth, and R.J. Spiteri Implicit-explicit Runge-Kutta methods for time-dependent partial differential equations Applied Numerical Mathematics 25 1997 151 167
5. O. Bartier, X. Hernot, and G. Mauvoisin Theoretical and experimental analysis of contact radius for spherical indentation Mechanics of Materials 42 2010 640 656
6. S. Biwa, and B. Storakers An analysis of fully plastic brinell indentation Journal of the Mechanics and Physics of Solids 43 1995 1303 1333
7. Brake, M.R., Reu, P.L., Van Goethem, D.J., Bejarano, M.V., Sumali, A., 2011. Experimental validation of an elastic-plastic contact model. In: ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, CO.
8. V. Brizmer, Y. Zait, Y. Kligerman, and I. Etsion The effect of contact conditions and material properties on elastic-plastic spherical contact Journal of Mechanics of Materials and Structures 1 2006 865 879
9. L. Chang, and H. Zhang A mathematical model for frictional elastic-plastic sphere-on-flat contacts at sliding incipient ASME Journal of Applied Mechanics 74 2007 100 106
10. W.R. Chang, I. Etsion, and D.B. Bogy An elastic-plastic model for the contact of rough surfaces ASME Journal of Tribology 109 1987 257 263
11. Y. Du, and S. Wang Energy dissipation in normal elastoplastic impact between two spheres ASME Journal of Applied Mechanics 76 2009 061010-1 061010-8
12. I. Etsion, Y. Kligerman, and Y. Kadin Unloading of an elastic-plastic loaded spherical contact International Journal of Solids and Structures 42 2005 3716 3729
13. P.S. Follansbee, and G.B. Sinclair Quasi-static normal indentation of an elasto-plastic half-space by a rigid sphere - I analysis International Journal of Solids and Structures 20 1984 81 91
14. J.A. Greenwood, and J.B.P. Williamson Contact of nominally flat surfaces Proceedings of the Royal Society of London, Series A 295 1966 300 319
15. J.A. Greenwood, and J.J. Wu Surface roughness and contact: an apology Meccanica 36 2001 617 630
16. C. Hardy, C.N. Baronet, and G.V. Tordion The elasto-plastic indentation of a half-space by a rigid sphere International Journal for Numerical Methods in Engineering 3 1971 451 462
17. H. Hertz Über die berührung fester elastischer körper (On the contact of elastic solids) Journal fur die Reine und Andgewandte Mathematik 92 1882 156 171
18. R. Hill The Mathematical Theory of Plasticity 1950 Oxford University Press New York
19. R. Hill, B. Storakers, and A.B. Zdunek A theoretical study of the Brinnell hardness test Proceedings of the Royal Society of London, Series A 423 1989 301 330
20. J.H. Horng An elliptic-elastic-plastic asperity microcontact model for rough surfaces ASME Journal of Tribology 120 1998 82 88
21. R.L. Jackson, I. Chusoipin, and I. Green A finite element study of the residual stress and deformation in hemispherical contacts ASME Journal of Tribology 127 2005 484 493
22. R.L. Jackson, and I. Green A finite element study of elasto-plastic hemispherical contact against a rigid flat ASME Journal of Tribology 127 2005 343 354
23. R.L. Jackson, and I. Green A statistical model of elasto-plastic asperity contact between rough surfaces Tribology International 39 2006 906 914
24. R.L. Jackson, I. Green, and D.B. Marghitu Predicting the coefficient of restitution of impacting elastic-perfectly plastic spheres Nonlinear Dynamics 60 2010 217 229
25. J. Jamari, and D.J. Schipper An elastic-plastic contact model of ellipsoid bodies Tribology Letters 21 2006 262 271
26. J. Jamari, and D.J. Schipper Experimental investigation of fully plastic contact of a sphere against a hard flat ASME Journal of Tribology 128 2006 230 235
27. Y.R. Jeng, and P.Y. Wang An elliptical microcontact model considering elastic, elastoplastic, and plastic deformation ASME Journal of Tribology 125 2003 232 240
28. K.L. Johnson The correlation of indentation experiments Journal of the Mechanics and Physics of Solids 18 1970 115 126
29. K.L. Johnson Contact Mechanics 1985 Cambridge University Press Cambridge
30. A.H. Kharaz, and D.A. Gorham A study of the restitution coefficient in elastic-plastic impact Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties 80 2000 549 559
31. L. Kogut, and I. Etsion Elastic-plastic contact analysis of a sphere and a rigid flat ASME Journal of Applied Mechanics 69 2002 657 662
32. L. Kogut, and I. Etsion A static friction model for elastic-plastic contacting rough surfaces ASME Journal of Tribology 126 2004 34 40
33. L. Kogut, and R.L. Jackson A comparison of contact modeling utilizing statistical and fractal approaches ASME Journal of Tribology 128 2006 213 217
34. L. Kogut, and K. Komvopoulos Analysis of the spherical indentation cycle for elastic-perfectly plastic solids Journal of Materials Research 19 2004 3641 3653
35. C.H. Lee, S. Masaki, and S. Kobayashi Analysis of ball indentation International Journal of Mechanical Sciences 14 1972 417 426
36. Y.Y. Lim, and M.M. Chaudhri The effect of the indenter load on the nanohardness of ductile metals: An experimental study on polycrystalline work-hardened and annealed oxygen-free copper Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties 79 1999 2979 3000
37. L.P. Lin, and J.F. Lin A new method for elastic-plastic contact analysis of a deformable sphere and a rigid flat ASME Journal of Tribology 128 2006 221 229
38. C.J. Lu, and M.C. Kuo Coefficients of restitution based on a fractal surface model ASME Journal of Applied Mechanics 70 2003 339 345
39. A. Majumdar, and B. Bhushan Fractal model of elastic-plastic contact between rough surfaces ASME Journal of Tribology 113 1991 1 11
40. J.R. Matthews Indentation hardness and hot pressing Acta Metallurgica 28 1980 311 318
41. S.D. Mesarovic, and N.A. Fleck Frictionless indentation of dissimilar elastic-plastic spheres International Journal of Solids and Structures 37 2000 7071 7091
42. S.D. Mesarovic, and K.L. Johnson Adhesive contact of elastic-plastic spheres Journal of the Mechanics and Physics of Solids 48 2000 2009 2033
43. H. Minamoto, and S. Kawamura Effects of material strain rate sensitivity in low speed impact between two identical spheres International Journal of Impact Engineering 36 2009 680 686
44. H. Minamoto, and S. Kawamura Moderately high speed impact of two identical spheres International Journal of Impact Engineering 38 2011 123 129
45. A. Ovcharenko, G. Halperin, G. Verberne, and I. Etsion In situ investigation of the contact area in elastic-plastic spherical contact during loading-unloading Tribology Letters 25 2007 153 160
46. R. Ramírez, T. Pöschel, N.V. Brilliantov, and T. Schwager Coefficient of restitution of colliding viscoelastic spheres Physical Review E 60 1999 4465 4472
47. T. Schwager, and T. Pöschel Coefficient of normal restitution of viscous particles and cooling rate of granular gases Physical Review E 57 1998 650 654
48. S. Shankar, and M.M. Mayuram Effect of strain hardening in elastic-plastic transition behavior in a hemisphere in contact with a rigid flat International Journal of Solids and Structures 45 2008 3009 3020
49. G.B. Sinclair, P.S. Follansbee, and K.L. Johnson Quasi-static normal indentation of an elasto-plastic half-space by a rigid sphere - ii results International Journal of Solids and Structures 21 1985 865 888
50. W.J. Stronge Rigid body collisions with friction Proceedings of the Royal Society of London, Series A 431 1990 169 181
51. W.J. Stronge Impacts in Mechanical Systems: Analysis and Modelling Contact Problems for Elasto-Plastic Impact in Multi-Body Systems vol. 551 2000 Springer pp. 189-234
52. J.G. Swadener, E.P. George, and G.M. Pharr The correlation of the indentation size effect measured with indenters of various shapes Journal of the Mechanics and Physics of Solids 50 2002 681 694
53. D. Tabor A simple theory of static and dynamic hardness Proceedings of the Royal Society of London, Series A 192 1948 247 274
54. D. Tabor The Hardness of Metals 1951 Oxford University Press Oxford
55. D. Tabor Indentation hardness: fifty years on - a personal view Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties 74 1996 1207 1212
56. Y. Tatara Extensive theory of force-approach relations of elastic spheres in compression and in impact ASME Journal of Engineering Materials and Technology 111 1989 163 168
57. Y. Tatara, and N. Moriwaki Study on impact of equivalent two bodies (coefficients of restitution of spheres of brass, lead, glass, porcelain and agate, and the material properties) Bulletin of the JSME 25 1982 631 637
58. C. Thornton Coefficient of restitution for collinear collisions of elastic-perfectly plastic spheres ASME Journal of Applied Mechanics 64 1997 383 386
59. L. Vu-Quoc, and X. Zhang An elasto-plastic contact force-displacement model in the normal direction: displacement-driven version Proceedings of the Royal Society of London, Series A 455 1999 4013 4044
60. L. Vu-Quoc, X. Zhang, and L. Lesburg A normal force-displacement model for contacting spheres accounting for plastic deformation: force-driven formulation ASME Journal of Applied Mechanics 67 2000 363 371
61. C.Y. Wu, C. Thornton, and L.Y. Li A semi-analytical model for oblique impacts of elastoplastic spheres Proceedings of the Royal Society of London, Series A 465 2010 937 960
62. S.L. Yan, and L.Y. Li Finite element analysis of cyclic indentation of an elastic-perfectly plastic half-space by a rigid sphere Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science 217 2003 505 514
63. W. Yu, and J.P. Blanchard An elastic-plastic indentation model and its solutions Journal of Materials Research 11 1996 2358 2367
64. X. Zhang, and L. Vu-Quoc Modeling the dependence of the coefficient of restitution on the impact velocity in elasto-plastic collisions International Journal of Impact Engineering 27 2002 317 341
65. Y. Zhao, D.M. Maietta, and L. Chang An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow ASME Journal of Tribology 122 2000 86 93