Theoretical and experimental analysis of contact radius for spherical indentation

Mechanics of Materials

Volumn 42, Issue 6, 2010, Pages 640-656

  Bartier, Olivier ^a   Hernot, Xavier ^a   Mauvoisin, Gérard ^a  

^a UNIVERSITÉ DE RENNES 1   (France)

Author keywords

Contact radius; Experimental measurement; Finite element method; Penetration depth; Pile up sink in; Spherical indentation

Indexed keywords

CONTACT RADIUS; EXPERIMENTAL MEASUREMENT; EXPERIMENTAL MEASUREMENTS; PENETRATION DEPTH; PILE-UP/SINK-IN; SPHERICAL INDENTATIONS;

COMPUTER SIMULATION; DISTANCE MEASUREMENT; FRICTION; MATHEMATICAL MODELS; MODELS; PILES; SPHERES; STRAIN HARDENING; TENSILE TESTING; VICKERS HARDNESS TESTING;

FINITE ELEMENT METHOD;

EID: 77953136225     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2010.03.003     Document Type: Article

References (43)

1. Alcala J., Barone A.C., and Anglada M. The influence of plastic hardening on surface deformation modes around Vickers and spherical indents. Acta Mater. 48 (2000) 3451-3464
2. Bartier O., Kucharski S., and Mauvoisin G. Numerical and experimental studies of spherical indentation data: influence of the friction coefficient and the hardening behaviour. Mater. Technol. 96 (2008) 59-70 (special issue)
3. Biwa S., and Störackers B. An analysis of fully plastic Brinell indentation. J. Mech. Phys. Solids 8 (1995) 1303-1333
4. Bridgman P. The stress distribution at the neck of a tensile specimen. Trans. Am. Soc. Met. 32 (1944) 553-574
5. Bulychev S.I., Alekhin V.P., Shorshorov M.K., Ternovskii A.P., and Shnyrev G.D. Determining Young's modulus from the indentor penetration diagram. Zavod. Lab. 41 (1975) 137-140
6. Bulychev S.I., Alekhin V.P., Shorshorov M.K., Ternovskii A.P., and Shnyrev G.D. Mechanical properties of materials studied from kinetic diagrams of load versus depth of impression during microimpression. Strength Mater. 8 (1976) 1084-1089
7. Cabezas E.E., and Celentano D.J. Experimental and numerical analysis of the tensile test using sheet specimens. Finite Elem. Anal. Des. 40 (2004) 555-575
8. Celentano D.J., Cabezas E.E., Garcia C.M., and Monsalve A.E. Characterization of the mechanical behaviour of materials in the tensile test: experiments and simulation. Model. Simul. Mater. Sci. Eng. 12 (2004) 425-444
9. Collin J.M., Mauvoisin G., and El Abdi R. An experimental method to determine the contact radius changes during a spherical instrumented indentation. Mech. Mater. 40 (2008) 401-406
10. Collin J.M., Mauvoisin G., Pilvin P., and El Abdi R. Use of spherical indentation data changes to materials characterization based on a new multiple cyclic loading protocol. Mater. Sci. Eng. A 488 (2008) 608-622
11. Davidenkov N., and Spiridonova N. Analysis of the state of stress in the neck of a tension test specimen. Proc. Am. Soc. Test. Mater. 46 (1946) 1147-1158
12. Dietrich L., Miastkowski J., and Szczepiński W. Nośność graniczna elementów konstrukcji (1970), PWN, Warszawa
13. Galin L.A. Spatial contact problems of the theory of elasticity for punches of circular shape in planar projection. J. Appl. Math. Mech. 10 (1946) 425-448
14. García-Garino C., Gabaldón F., and Goicolea J.M. Finite element simulation of the simple tension test in metals. Finite Elem. Anal. Des. 42 (2006) 1187-1197
15. Gromada, M., Mishuris, G., Öchsner, A., 2004. Critical analysis of the evaluation of plastic material properties obtained from standard round tensile specimens. In: Proceedings of the 3rd International Conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2004), Ariel, Israel, pp. 78-87.
16. Hardy C., Baronet C.N., and Tordion G.V. The elasto-plastic indentation of a half-space by a rigid sphere. Int. J. Numer. Methods Eng. 3 (1971) 451-462
17. Hay J.C., and Wolff P.J. Small correction required when applying the Hertzian contact model to instrumented indentation data. J. Mater. Res. 16 (2001) 1280-1286
18. Hernot X., Bartier O., Bekouche Y., Mauvoisin G., and El Abdi R. Influence of penetration depth and mechanical properties on contact radius determination for spherical indentation. Int. J. Solids Struct. 43 (2006) 4136-4153
19. Hertz H. Uber die Berührung festischer Körper. J. Reine Angew. Math. 92 (1882) 156-171
20. Hill R., Stôrakers B., and Zdunek A.B. A theoretical study of the Brinell hardness test. R. Soc. Lond. A 423 (1989) 301-330
21. Huber N., and Tsakmakis Ch. Experimental and theoretical investigation of the effect of kinematic hardening on spherical indentation. Mech. Mater. 27 (1998) 241-248
22. Johnson K.L. Contact Mechanics (1985), Cambridge University Press, Cambridge, UK
23. Kim S.H., Lee B.W., Choi Y., and Kwon D. Quantitative determination of contact depth during spherical indentation of metallic materials-a FEM study. Mater. Sci. Eng. A 415 (2006) 59-65
24. Kucharski S., and Mröz Z. Identification of plastic hardening parameters of metals from spherical indentation tests. Mater. Sci. Eng. A 318 (2001) 65-76
25. Lee H., Lee J.H., and Pharr G.M. A numerical approach to spherical indentation techniques for material property evaluation. J. Mech. Phys. Solids 53 (2005) 2037-2069
26. Ling Y. Uniaxial true stress-strain after necking. AMP J. Technol. 5 (1996) 37-48
27. Mata M., Anglada M., and Alcala J. Contact deformation regimes around sharp indentations and the concept of the characteristic strain. J. Mater. Res. 17 (2002) 964-976
28. Matthews J.R. Indentation hardness and hot pressing. Acta Metall. 28 (1980) 311-318
29. Mesarovic D.J., and Fleck N.A. Spherical indentation of elastic-plastic solids. Proc. R. Soc. Lond. A 455 (1999) 2707-2728
30. Meyer E. Untersuchen über Härteprüfung und Härte. Zeits. D. Vereines Deutsch. Ingenieure 52 (1908) 645-654
31. Mirone G. A new model for the elastoplastic characterization and the stress-strain determination on the necking section of a tensile specimen. Int. J. Solids Struct. 41 (2004) 3545-3564
32. Norbury A., and Samuel T. The recovery and sinking-in or piling-up of material in the Brinell test, and the effect of these factors on the correlation of the Brinell with certain other hardness tests. J. Iron Steel Inst. 117 (1928) 673-687
33. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7 (1992) 1564-1583
34. Pane I., and Blank E. Role of plasticity on indentation behavior: relations between surface and subsurface responses. Int. J. Solids Struct. 43 (2006) 2014-2036
35. Peralta P., Ledoux R., Dickerson R., Hakik M., and Dickerson P. Characterization of surface deformation around Vickers indents in monocrystalline materials. Metall. Mater. Trans. A 35 (2004) 2247-2255
36. Rodriguez J., and Garrido Maneiro M.A. A procedure to prevent pile up effects on the analysis of spherical indentation data in elastic-plastic materials. Mech. Mater. 39 (2007) 987-997
37. Shorshorov M.K., Bulychev S.I., and Alekhin V.P. Work of plastic and elastic deformation during indenter indentation. Sov. Phys. Dokl. 26 (1981) 769-771
38. Sinclair G.B., Follansbee P.S., and Johnson K.L. Quasi-static normal indentation of an elasto-plastic half-space by a rigid sphere, ii. Results. Int. J. Solids Struct. 21 (1985) 865-888
39. Sneddon I.N. The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile. Int. J. Eng. Sci. 3 (1965) 47-57
40. Strange D.J., and Varshneya A.K. Finite element simulation of microindentation on aluminium. J. Mater. Sci. 36 (2001) 1943-1949
41. Taljat B., and Pharr G.M. Development of pile-up during spherical indentation of elastic-plastic solids. Int. J. Solids Struct. 41 (2004) 3891-3904
42. Taljat B., Zacharias T., and Kosel T. New analytical procedure to determine stress-strain curve from spherical indentation data. Int. J. Solids Struct. 35 (1998) 4411-4426
43. Tillier, Y., 1998. Identification par analyse inverse du comportement mécanique des polymères solides; applications aux sollicitations multiaxiales et rapides. Doctor's Thesis, ENSAM PARIS.