Conventional and Modified Veneered Zirconia vs. Metalloceramic: Fatigue and Finite Element Analysis

Journal of Prosthodontics

Volumn 21, Issue 6, 2012, Pages 433-439

  Silva, Nelson R F A ^a   Bonfante, Estevam ^a   Rafferty, Brian T ^a   Zavanelli, Ricardo A ^b   Martins, Leandro L ^c   Rekow, E Dianne ^a   Thompson, Van P ^a   Coehlo, Paulo G ^a  

^a NEW YORK UNIVERSITY   (United States)

^b FEDERAL UNIVERSITY OF GOIÁS   (Brazil)

^c Department of Prosthodontics   (Brazil)

Author keywords

All ceramic; Fatigue; FEA; Metal ceramic retainers; Single crown; Weibull

Indexed keywords

ALLOY; YTTRIA STABILIZED TETRAGONAL ZIRCONIA; YTTRIUM; ZIRCONIUM;

ARTICLE; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; COMPUTER SIMULATION; DENTAL PORCELAIN; DENTAL PROCEDURE; DENTAL VENEER; FINITE ELEMENT ANALYSIS; HUMAN; METHODOLOGY; SURVIVAL; TOOTH CROWN; TOOTH PROSTHESIS;

COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; CROWNS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL STRESS ANALYSIS; DENTAL VENEERS; FINITE ELEMENT ANALYSIS; HUMANS; METAL CERAMIC ALLOYS; SURVIVAL ANALYSIS; YTTRIUM; ZIRCONIUM;

EID: 84865382807     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2012.00861.x     Document Type: Article

References (40)

1. Raigrodski AJ: Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2004;92:557-562
2. Studart AR, Filser F, Kocher P, et al: Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges. Dent Mater 2007;23:177-185
3. Denry I, Kelly JR: State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307
4. Raigrodski AJ, Chiche GJ, Potiket N, et al: The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent 2006;96:237-244
5. Sailer I, Fehér A, Filser F, et al: Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont 2007;20:383-388
6. Molin MK, Karlsson SL: Five-year clinical prospective evaluation of zirconia-based Denzir 3-unit FPDs. Int J Prosthodont 2008;21:223-227
7. Schmitter M, Mussotter K, Rammelsberg P, et al: Clinical performance of extended zirconia frameworks for fixed dental prostheses: two-year results. J Oral Rehabil 2009;36:610-615
8. Tinschert J, Schulze KA, Natt G, et al: Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. Int J Prosthodont 2008;21:217-222
9. Larsson C, Vult von Steyern P, Sunzel B, et al: All-ceramic two- to five-unit implant-supported reconstructions. A randomized, prospective clinical trial. Swed Dent J 2006;30:45-53
10. Rekow D, Thompson VP: Engineering long term clinical success of advanced ceramic prostheses. J Mater Sci Mater MEd 2007;18:47-56
11. Marchack BW, Futatsuki Y, Marchack CB, et al:Customization of milled zirconia copings for all-ceramic crowns: a clinical report. J Prosthet Dent 2008;99:169-173
12. Miller LL: Framework design in ceramo-metal restorations. Dent Clin North Am 1977;21:699-716
13. Rosentritt M, Steiger D, Behr M, et al: Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns. J Dent 2009;37:978-983
14. Shoher I, Whiteman AE: Reinforced porcelain system: a new concept in ceramometal restorations. J Prosthet Dent 1983;50:489-496
15. Weinstein M, Katz S, Weinstein AB, Inventors: Permadent Manufacturing Corporation, assignee. Fused porcelain-to-metal teeth. 1962 Sept. 1
16. Weinstein M, Weinstein AB, Inventors: Porcelain Covered Metal-Reinforced Teeth. 1962 Sept. 11
17. Ortorp A, Kihl ML, Carlsson GE: A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practice. J Dent 2009;37:731-736
18. Näpänkangas R, Raustia A: Twenty-year follow-up of metal-ceramic single crowns: a retrospective study. Int J Prosthodont 2008;21:307-311
19. Swain MV: Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures. Acta Biomaterialia 2009;5:1668-1677
20. Bonfante EA, Sailer I, Silva NR, et al: Failure modes of Y-TZP crowns at different cusp inclines. J Dent 2010;38:707-712
21. Kim B, Zhang Y, Pines M, et al: Fracture of porcelain-veneered structures in fatigue. J Dent Res 2007;86:142-146
22. Huang M, Thompson VP, Rekow ED, et al: Modeling of water absorption induced cracks in resin-based composite supported ceramic layer structures. J Biomed Mater Res Part B Appl Biomater 2008;84:124-130
23. Nelson W: Accelerated Testing: Statistical Models, Test Plans, and Data Analysis(ed). New York, Wiley, 1990
24. Zhao W, Elsayed E: A general accelerated life model for step-stress testing. IEEE Trans Reliability 2005;37:1059-1069
25. Rekow D, Zhang Y, Thompson V: Can material properties predict survival of all-ceramic posterior crowns? Compend Contin Educ Dent 2007;28:362-368; quiz 369, 386
26. Silva NR, Bonfante EA, Zavanelli RA, et al: Reliability of metalloceramic and zirconia-based ceramic crowns. J Dent Res 2010;89:1051-1056
27. Silva NR, Bonfante EA, Rafferty BTM, et al: Modified Y-TZP core design improves all-ceramic crown reliability. J Dent Res 2011;90:104-108
28. Piconi C, Maccauro G: Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25.
29. Quinn JB, Sundar V, Parry EE, et al: Comparison of edge chipping resistance of PFM and veneered zirconia specimens. Dent Mater 2010;26:13-20
30. Donovan TE: Porcelain-fused-to-metal (PFM) alternatives. J Esthet Restor Dent 2009;21:4-6
31. Sailer I, Pjetursson BE, Zwahlen M, et al: A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part II: fixed dental prostheses. Clin Oral Implants Res 2007;18:86-96
32. Fischer J, Stawarzcyk B, Trottmann A, et al: Impact of thermal misfit on shear strength of veneering ceramic/zirconia composites. Dent Mater 2009;25:419-423
33. Tholey MJ, Swain MV, Thiel N: SEM observations of porcelain Y-TZP interface. Dent Mater 2009;25:857-862
34. Dejak B, Mlotkowski A, Romanowicz M: Finite element analysis of stresses in molars during clenching and mastication. J Prosthet Dent 2003;90:591-597
35. Rafferty BT, Janal MN, Zavanelli RA, et al: Design features of a three-dimensional molar crown and related maximum principal stress. A finite element model study. Dent Mater 2010;26:156-163
36. Coelho PG, Silva NR, Bonfante EA, et al: Fatigue testing of two porcelain-zirconia all-ceramic crown systems. Dent Mater 2009;25:1122-1127
37. Silva NR, Bonfante EA, Rafferty BT, et al: Modified Y-TZP core design improves all-ceramic crown reliability. J Dent Res 2011;90:104-108
38. Lawn BR: Indentation of ceramics with spheres: a century after hertz. J Am Ceram Soc 1998;81:1977-1994
39. Lawn BR, Deng Y, Miranda P, et al: Overview: damage in brittle layer structures from concentrated loads. J Mater Res 2002;17:3019-3036
40. Bhowmick S, Melendez-Martinez JJ, Hermann I, et al: Role of indenter material and size in veneer failure of brittle layer structures. J Biomed Mater Res B Appl Biomater 2007;82:253-259