Machining of austenitic stainless steels - A review

International Journal of Machining and Machinability of Materials

Volumn 12, Issue 1-2, 2012, Pages 178-192

  Kaladhar, M ^a   Venkata Subbaiah, K ^b   Srinivasa Rao, C H ^b  

^a Department of Mechanical Engineering   (India)

^b ANDHRA UNIVERSITY   (India)

Author keywords

Austenitic stainless steels; Difficult to cut materials; Machining; Review

Indexed keywords

AUSTENITE; CORROSION RESISTANCE; MACHINING; REVIEWS; STEEL CORROSION; STEEL METALLURGY; STRAIN HARDENING;

BUILT UP EDGE; DIFFICULT-TO-CUT MATERIALS; EXCELLENT CORROSION RESISTANCES; HIGH DURABILITY;

AUSTENITIC STAINLESS STEEL;

EID: 84865204302     PISSN: 17485711     EISSN: 1748572X     Source Type: Journal    
DOI: 10.1504/IJMMM.2012.048564     Document Type: Review

References (42)

1. Abou-El-Hossein, K.A. and Yahya, Z. (2005) 'High speed end milling of AISI 304 stainless steel using new geometrically developed carbide inserts', International Conference on Mechanical and Materials Engineering, Gliwice, Poland, pp.1-6.
2. Akasawa, T., Sakurai, H., Nakamura, M., Tanaka, T. and Takano, K. (2003) 'Effects of free-cutting additives on the machinability of austenitic stainless steels', Journal of Material Processing Technology, December, Vols. 143/144, pp.66-71.
3. Al-Ahmari, A.M.A (2007) 'Predictive machinability models for a selected hard material in turning operations', Journal of Material Processing Technology, Vol. 190, No. 3, pp.305-311.
4. Australian Stainless Steel Development Association (ASDA) (2006) 'A technical bulletin 200 series stainless steel CRMN grades', Vol. 1, No. 10, pp.2-3.
5. Bonnet, C., Valiorgue, F., Rech, J., Bergheau, J.M., Gilles, P. and Claudin, C. (2008) 'Development of a friction modelling method in dry cutting of AISI 316L austenitic stainless steels', International Journal of Material Form Suppl., Vol. 1, No. 1, pp.1211-1214.
6. Çaydas, U. and Ekici, S. (2010) 'Support vector machines models for surface roughness prediction in CNC turning of AISI 304 austenitic stainless steel', Journal of Intell. Manufacturing Technology, DOI: 10.1007/s10845-010- 0415-2.
7. Ciftci, I. (2006) 'Machining of austenitic stainless steels using CVD multi-layer coated cemented carbide tools', Tribology International, Vol. 39, No. 6, pp.565-569.
8. Endrino, J.L., Fox-Rabinovich, G.S. and Gey, C. (2006) 'Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel', Surface & Coatings Technology, Vol. 200, No. 24, pp.6840-6845.
9. Galanis, N.I. and Manolakos, D.E. (2010) 'Surface roughness prediction in turning of femoral head', International Journal of Advanced Manufacturing Technology, Vol. 51, No. 5, pp.79-86.
10. Gandarias, A., de Lacalle, L.N.L., Aizpitarte, X. and Lamikiz, A. (2008) 'Study of the performance of the turning and drilling of austenitic stainless steels using two coolant techniques', International Journal of Machining and Machinability of Materials, Vol. 3, Nos. 1-2, pp.1-17.
11. Hong, S.Y. and Broomer, M. (2000) 'Economical and ecological cryogenic machining of AISI 304 austenitic stainless steel', Clean Products and Processes, Vol. 2, No. 3, pp.157-166.
12. International Stainless Steel Forum (ISSF) (2005) 'A technical guide to chrome-manganese austenitic stainless steel and advice for potential guide', pp.8-10.
13. International Stainless Steel Forum (ISSF) (2010) Annual Review, pp.1-31.
14. Jahan, M.P., Wong, Y.S. and Rahman, M. (2010) 'A comparative experimental investigation of deep-hole micro-EDM drilling capability for cemented carbide (WC-Co) against austenitic stainless steel (SUS 304)', International Journal of Advanced Manufacturing Technology, Vol. 46, No. 9,pp.1145-1160.
15. Jang, D.Y., Watkins, T.R., Kozaczek, K.J., Hubbard, C.R. and Cavin, O.B. (1996) 'Surface residual stresses in machined austenitic stainless steel', Wear, Vol. 194, Nos. 1-2, pp.168-173.
16. Jiang, L., Roos, A. and Liu, P. (1997) 'The influence of austenite grain size and its distribution on chip deformation and tool life during machining of AISI 304L', Metallurgical and Material Transactions, Vol. 28, No. 11, pp.2415-2422.
17. Kaladhar, M., Subbaiah, K.V., Rao, Ch.S. and Rao, K.N. (2010) 'Optimization of process parameters in turning of AISI 202 austenitic stainless steel', ARPN Journal of Engineering and Applied Sciences, Vol. 5, No. 9, pp.79-87.
18. Kaladhar, M., Venkata Subbaiah, K., Srinivasa Rao, Ch. (2011) 'Performance evaluation of coating materials and process parameters optimization for surface quality during turning of AISI 304 austenitic stainless steel', Multi-craft International Journal of Engineering, Science and Technology, Vol. 3, No. 4, pp.89-102.
19. Kalpakjian, S. (2006) Manufacturing Process for Engineering Materials, Addison-Wesley, New York.
20. Khan, A.A. and Hajjaj, S.S. (2006) 'Capabilities of ceremets tools for high speed machining of austenitic stainless steels', Journal of Applied Science, Vol. 6, No. 4, pp.779-784.
21. Klocke, F., Rizzuti, S., Frankl, P., Gerschwiler, K., Lung, D. and Settineri, L. (2010) 'Experimental and numerical investigation on the delamination behaviour of PVD-coated tools in turning of austenitic stainless steel', International Journal of Materials Form, Vol. 3, No. S1, pp.435-438.
22. Korkut, I., Kasap, M., Ciftci, I. and Seker, U. (2004) 'Determinaton of optimum cuttingparameters during machining of AISI 304 austenitic stainless steel', Materials and Design, Vol. 25, No. 4, pp.303-305.
23. Kosa, T. (1989) 'Machining of stainlesssteel', 9th ASM International.
24. Kuram, E., Ozcelik, B., Demirbas, E. and Şik, E. (2010) 'Effects of the cutting fluid types and cutting parameters on surface roughness and thrust force', Proceedings of the World Congress on Engineering, London.
25. Lin, W.S. (2008) 'The study of high speed fine turning of austenitic stainless steel', Journal of Achievements in Materials and Manufacturing, Vol. 27, No. 2, pp.191-194.
26. M'Saoubi, R., Outeiro, J.C., Changeux, B., Lebrun, J.L. and Dias, A.M. (1999) 'Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels', Journal of Materials Processing Technology, Vol. 96, Nos. 1-3, pp.225-233.
27. Maranhão, C. and Davim, P.J. (2010) 'Finite element modelling of machining of AISI 316 steel: numerical simulation and experimental validation', Simulation Modeling Practice and Theory, Vol. 18, No. 2, pp.2139-2156.
28. Metal World Research Team (2007) 'Substitution of low-nickel stainless steel grades finds momentum', Metal World, 24pp.
29. Muñoz-Sánchez, A., Miguélez, H., Canteli, J.A. and Cantero, J.L. (2009) 'The influence of tool wear in surface integrity when machining austenitic stainless steel', DYMAT - 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, pp.1823-1829.
30. Nordin, M., Sundstroma, U.R., Selinder, T.I. and Hogmark, S. (2000) 'Wear and failure mechanisms of multilayered PVD TiNrTaN coated tools when milling austenitic stainless steel', Surface and Coatings Technology, Vols. 133/134, No. 1, pp.240-246.
31. O'Sullivan, D. and Cotterell, M. (2002) 'Machinability of austenitic stainless steel SS303', Journal of Material Processing Technology, Vol. 124, Nos. 1-2, pp.153-159.
32. Ozek, C. et al. (2006) 'Turning of AISI304 austenitic stainless steel', Journal of Engineering and Natural Sciences, Vol. 2, No. 3, pp.117-121.
33. Paro, J., Hanninen, H. and Kauppinen, V., (2001) 'Tool wear and machinability of X5 CrMnN18 18 stainless steels', Journal of Material Processing Technology, Vol. 119, No. 1, pp.14-20.
34. Reddy, B.S., Rao, P.S., Kumar, J.S. and Reddy, K.V.K. (2010) 'Parametric study of electrical discharge machining of AISI 304 stainless steel', International Journal of Engineering Science and Technology, Vol. 2, No. 8, pp.3535-3550.
35. Rodriguez, P., Fernandez, A.I., Labarga, J.E. and Garcia, J. (2008) 'Estimation of optimal cutting conditions for austenitic stainless steels machining', Proceedings of ECTC, Miami, Florida, USA.
36. Sensussi, G.H. (2007) 'Interaction effect of feed rate and cutting speed in CNC turning on chip micro hardness of 304 austenitic stainless steel', World Academy of Science, Engineering and Technology, pp.121-126.
37. Specialty Steel Industry of North America (1995) Desigenr's Hand Book for Stainless Steel Machining, Washington, DC.
38. Tekiner, Z. and Yesilyurt, S. (2004) 'Investigation of the cutting parameters depending on process sound during turning of AISI 304 austenitic stainless steel', Materials and Design, Vol. 25, No. 6, pp.507-513.
39. Trent, E.M. and Wright, P.K. (1989) Metal Cutting, London, Butterworths Heinemann, New York.
40. Valiorgue, F., Rech, J., Hamdi, H., Gilles, P. and Bergheau, J.M. (2008) 'A new approach for the modelling of residual stresses induced by turning of 316L austenitic stainless steel', International Journal of Machining and Machinability of Materials, Vol. 4, No. 4, pp.275-286.
41. Xavior, M.A. and Adithan, M. (2009) 'Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel', Journal of Material Processing Technology, Vol. 209, No. 2, pp.900-909.
42. Li, Z. and Wu, D. (2010) 'Effect of free cutting additives on machining characteristics of austenitic stainless steels', Journal of Mater. Sci. Technology, Vol. 26, No. 9, pp.839-844.