Strain rate and temperature dependent fracture criteria for isotropic and anisotropic metals

International Journal of Plasticity

Volumn 37, Issue , 2012, Pages 1-15

  Khan, Akhtar S ^a   Liu, Haowen ^a  

^a Baltimore County   (United States)

Author keywords

Fracture criterion; Isotropy and anisotropy; Strain rate and temperature dependent; Superimposed hydrostatic pressure; Tension compression asymmetry

Indexed keywords

ALUMINUM; ANISOTROPY; DUCTILE FRACTURE; FRACTURE; FRACTURE MECHANICS; FRACTURE TOUGHNESS; HARDENING; HYDRAULICS; HYDROSTATIC PRESSURE; SHEAR FLOW; TEMPERATURE DISTRIBUTION; TITANIUM ALLOYS; VANADIUM ALLOYS;

DUCTILE FRACTURE CRITERION; FRACTURE CRITERIA; MAGNITUDE OF STRESS VECTOR (MSV); PRINCIPAL STRESS SPACE; TEMPERATURE DEPENDENCE; TEMPERATURE DEPENDENT; TEMPERATURE SENSITIVITY; TENSION-COMPRESSION ASYMMETRY;

STRAIN RATE;

EID: 84864663278     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2012.01.012     Document Type: Article

References (62)

1. Alves, M., Jones, N., 1999. Influence of hydrostatic stress on failure of axisymmetric notched specimens. J. Mech. Phys. Solids 47(3), 643-667.
2. Alves, J. L., 2003. Simula ao numérica do processo de estampagem de chapas metálicas: Modelal ao mecanica e métodos numéricos. Ph. D. Thesis, University of Minho, Portugal.
3. Altenbach, H., Skrzypek, J. J., 1999. Creep and Damage in Materials and Structures. Springer, Wien, New York, CISM.
4. Benallal, A., Comi, C., 2000. On localization in saturated porous continua. C. R. Acad. Sci. Paris 328(série IIb), 847-853.
5. Brian, N. L., 2005. Effects of geometrical anisotropy on failure in a plastically anisotropic metal. Eng. Fract. Mech. 72, 2792-2807.
6. Bruenig, M., 2003. An anisotropic ductile damage model based on irreversible thermodynamics. Int. J. Plast. 19, 1679-1713.
7. Bruhns, O. T., Schiesse, P., 1996. A continuum model of elastic-plastic materials with anisotropic damage by oriented micro voids. Eur. J. Mech. A/Solids 15, 367-396.
8. Brunet, M., Morestin, F., 2001. Experimental and analytical necking studies of anisotropic sheet metals. J. Mater. Proc. Tech. 112, 214-226. (Pubitemid 32471320)
9. Chaboche, J. L., 1984. Anisotropic creep damage in the framework of continuum damage mechanics. Nucl. Eng. Des. 79, 309-319.
10. Chaboche, J. L., 1999. Thermodynamically founded CDM models for creep and other conditions, International centre for mechanical sciences. Creep Damage Mater. Struct., 209-283.
11. Chow, C. L., Wang, J., 1987. An anisotropic theory of continuum damage mechanics for ductile fracture. Eng. Fract. Mech. 27, 547-558. (Pubitemid 17635949)
12. Clausen, A. H., Børvik, T., Hopperstad, O. S., 2004. Flow and fracture characteristics of aluminum alloy AA5083-H116 as function of strain rate, temperature and triaxiality. Mater. Sci. Eng. 364, 260-272. (Pubitemid 38158068)
13. Cordebois, J. P., Sidoroff, E., 1982. Anisotropic damage in elasticity and plasticity. J. Mech. Theor. Appl. 1, 45-60.
14. Davidson, T. E., Uy, J. C., Lee, A. P., 1966. The tensile fracture characteristics of metals under hydrostatic pressures to 23 kilobars. Acta Metall. 14, 937-948.
15. French, I. E., Weinrich, P. F., Weaver, C. W., 1973. Tensile fracture of free machining brass as a function of hydrostatic pressure. Acta Metall. 21, 1045-1049.
16. Gao, X., Zhang, T., Matthew, H., et al, 2009. Effects of the stress state on plasticity and ductile failure of an aluminum 5083 alloy. Int. J. Plast. 25, 2366-2382.
17. Gurson, A. L., 1977. Continuum theory of ductile rupture by void nucleation and growth: Part I. Yield criteria and flow rules for porous ductile media. J. Eng. Mater. Technol., Trans. ASME 99, 2-15.
18. Hancock, J. W., Mackenzie, A. C., 1976. On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-states. J. Mech. Phys. Solids 24, 147-169.
19. Houssem, B., Khema, S., Abdelwaheb, D., 2010. On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming. Int. J. Plast. 26, 1541-1575.
20. Hult, J., 1974. Creep in continua and structures. In: Zeman, J. L., Ziegler, H. (Eds.), Topics in Applied Continuum Mechanics. Springer, New York, pp. 137-155.
21. Johnson, G. R., Cook, W. H., 1985. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng. Fract. Mech. 21, 31-48.
22. Ju, J. W., 1990. Isotropic and anisotropic damage variables in continuum damage mechanics. J. Eng. Mech. 116, 2764-2770.
23. Kachanov, L. M., 1958. Time of the rupture process under creep conditions. Isv. Akad. Nauk. SSR. Otd Tekh. Nauk. 8, 26-31.
24. Kachanov, M., 1980. Continuum model of medium with cracks. J. Eng. Mech. Div. 106, 1039-1051.
25. Kachanov, L. M., 1986. Introduction to Continuum Damage Mechanics. Martinus Nijhoff Publishers, The Netherlands.
26. Kao, A. S., Kuhn, H. A., Richmond, O., Spitzig, W. A., 1990. Tensile fracture and fractographic analysis of 1045 spheroidized steel under hydrostatic pressure. J. Mater. Res. 5(1), 83-91. (Pubitemid 20667582)
27. Khan, A. S., Huang, S., 1995. Continuum theory of plasticity. John Wiley & Sons. Inc., New York.
28. Khan, A. S., Kazmi, R., Farrokh, B., 2007a. Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures. Int. J. Plast. 23, 931-950. (Pubitemid 46366620)
29. Khan, A. S., Kazmi, R., Farrokh, B., et al, 2007b. Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: experiments and modeling over a wide range of strain-rates and temperatures. Int. J. Plast. 23, 1105-1125. (Pubitemid 46498676)
30. Khan, A. S., Liang, R., 1999. Behaviors of three B. C. C. metal over a wide range of strain rates and temperatures: experiments and modeling. Int. J. Plast. 15, 1089-1109.
31. Khan, A. S., Liu, H., accepted for publication. Variable strain rate sensitivity in an aluminum alloy: response and constitutive modeling. Int. J. Plast.
32. Khan, A. S., Liu, H., 2012. A new approach for ductile fracture prediction on Al 2024-T351 alloy. Int. J. Plast. doi:10.1016/j.ijplas.2012.01. 003.
33. Khan, A. S., Suh, Y. S., Kazmi, R., 2004. Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys. Int. J. Plast. 20, 2233-2248.
34. Khan, A. S., Yu, S., submitted for publication. Deformation Induced anisotropic responses of Ti-6Al-4V alloy. Part I: Experiments. Int. J. Plast.
35. Khan, A. S., Yu, S., Liu, H., in press. Deformation induced anisotropic responses of Ti-6Al-4V alloy. Part II: Strain rate and temperature dependent anisotropic yield criterion. Int. J. Plast.
36. Khan, A. S., Zhang, H., 2000. Mechanically alloyed nanocrystalline iron and copper mixture: behavior and constitutive modeling over a wide range of strain rates. Int. J. Plast. 16(12), 1477-1492.
37. Krajcinovie, D., Fonseka, G. U., 1981. The continuum damage theory of brittle materials. Part I: General theory. ASME J. Appl. Mech. 48, 809-815. (Pubitemid 12467541)
38. Leckie, F. A., Hayhurst, D., 1974. Creep rupture of structures. Proc. R. Soc. Lond. A 340, 323-347.
39. Lemaitre, J., 1985. A continuous damage mechanics model for ductile fracture. J. Eng. Mater. Tech. 107(1), 83-89. (Pubitemid 15490348)
40. Lemaitre, J., Chaboche, J. L., 1975. A nonlinear model of creep fatigue cumulation and interaction. In: Hult, J. (Ed.), Proc. IUTAM, Symposium on Mechanics of Viscoelastic Media and Bodies, pp. 291-301.
41. Lemaitre, J., Chaboche, J. L., 1990. Mechanics of Solid Mechanics. Cambridge University Press.
42. Lemaitre, J., Chaboche, J. L., 1985. Mécanique des matériaux solides. Dunod, Paris.
43. Lemaitre, J., 1992. A Course on Damage Mechanics. Springer, Berlin.
44. Lemaitre, J., Dufailly, J., 1987. Damage measurements. Eng. Fract. Mech. 28, 643-661.
45. LeRoy, G., Embury, J., Edwards, G., Ashby, M. F., 1981. A model of ductile fracture based on the nucleation and growth of voids. Acta Metall. 29, 1509-1522. (Pubitemid 12437721)
46. Lewandowski, J. J., Lowhaphandu, P., 1998. Effects of hydrostatic pressure on mechanical behavior and deformation processing of materials. Int. Mater. Rev. 43(4), 145-188.
47. Lubarda, V. A., Krajcinovic, D., 1993. Damage tensors and crack density distribution. Int. J. Solids Struct. 30, 2859.
48. Mackenzie, A. C., Hancock, J. W., Brown, D. K., 1977. On the influence of state of stress on ductile failure initiation in high strength steels. Eng. Fract. Mech. 9, 167-188.
49. McClintock, F. A., Kaplan, S. M., Berg, C. A., 1966. Ductile fracture by hole growth in shear bands. Int. J. Fract. Mech. 2, 614-627.
50. Murakami, S., 1988. Mechanical modeling of material damage. J. Appl. Mech. 55(2), 280-286.
51. Murakami, S., Ohno, N., 1981. A Continuum Theory of Creep and Creep Damage. Ponter, A. R. S.
52. Rabotnov, Y. N., 1969. Creep Problems in Structural Members. North-Holland Publishing Company, Amsterdam.
53. Reddy, V. N., Dixit, P. M., Lal, G. K., 2000. Ductile fracture criteria and its prediction in axisymmetric drawing. Int. J. Mach. Tools Manuf. 40, 95-111. (Pubitemid 32080187)
54. Rice, J. R., Tracey, D. M., 1969. On the ductile enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 17, 201-217.
55. Steglich, D., Brocks, W., 1997. Micromechanical modeling of the behavior of ductile materials including particles. Comput. Mater. Sci. 9, 7-17. (Pubitemid 127451300)
56. Steinmann, P., Carol, I., 1998. A framework for geometrically nonlinear continuum damage mechanics. Int. J. Eng. Sci. 36, 1793-1814. (Pubitemid 128419953)
57. Stoughton, T. B., Yoon, J. W., 2011. A new approach for failure criterion for sheet metals. Int. J. Plast. 27(3), 440-459.
58. Teng, X., Wierzbicki, T., 2006. Evaluation of six fracture models in high velocity perforation. Eng. Fract. Mech. 73(12), 1653-1678.
59. Tvergaard, V., Needleman, A., 1984. Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 32, 157-169. (Pubitemid 14509228)
60. Voyiadjis, G. Z., Kattan, P. I., 1992a. A plasticity-damage theory for large deformations of solids. Part I: Theoretical formulation. Int. J. Eng. Sci. 30, 1089-1108.
61. Voyiadjis, G. Z., Kattan, P. I., 1992b. A plasticity-damage theory for large deformation of solids - I. Theoretical formulation. Int. J. Eng. Sci. 30, 1089-1108.
62. Wierzbicki, T., Bao, Y., Lee, Y. W., Bai, Y., 2005. Calibration and evaluation of seven fracture models. Int. J. Mech. Sci. 47, 719-743. (Pubitemid 40583519)