Development of a biodegradable bone cement for craniofacial applications

Journal of Biomedical Materials Research - Part A

Volumn 100 A, Issue 9, 2012, Pages 2252-2259

  Henslee, Allan M ^a   Gwak, Dong Ho ^b   Mikos, Antonios G ^a   Kasper, F Kurtis ^a  

^a Rice University   (United States)

^b RICE UNIVERSITY   (United States)

Author keywords

bone tissue engineering; in situ crosslinkable; injectable biomaterial; poly(propylene fumarate)

Indexed keywords

ACCELERATOR CONCENTRATION; BONE REPAIR; BONE TISSUE ENGINEERING; COMPRESSIVE MODULI; CRANIOFACIAL; CROSS-LINKABLE; CROSSLINKED; CROSSLINKED COMPOSITES; FULL FACTORIAL DESIGN; INJECTABLE BIOMATERIALS; MACROMERS; MAIN EFFECT; MAXIMUM TEMPERATURE; MICRO-PARTICLES; PARTICLE SIZE RANGES; POLY(PROPYLENE FUMARATE); SETTING TIME; TEMPERATURE RISE; TWO-COMPONENT; WEIGHT PERCENTAGES;

BIOLOGICAL MATERIALS; COMPRESSIVE STRENGTH; CROSSLINKING; MECHANICAL PROPERTIES; PARTICLE SIZE; PROPYLENE; TISSUE ENGINEERING;

BONE CEMENT;

BIOMATERIAL; BONE CEMENT; POLY (PROPYLENE FUMARATE); UNCLASSIFIED DRUG;

ARTICLE; BONE REMODELING; CRANIOFACIAL BONE REMODELING; CROSS LINKING; MICROPARTICLE ENZYME IMMUNOASSAY; PARTICLE SIZE; PHYSICAL PARAMETERS; STRENGTH; TEMPERATURE; WEIGHT;

ABSORBABLE IMPLANTS; BONE CEMENTS; COMPRESSIVE STRENGTH; CROSS-LINKING REAGENTS; FUMARATES; MATERIALS TESTING; PARTICLE SIZE; POLYPROPYLENES; TISSUE ENGINEERING;

EID: 84864418063     PISSN: 15493296     EISSN: 15524965     Source Type: Journal    
DOI: 10.1002/jbm.a.34157     Document Type: Article

References (36)

1. Scheller EL, Krebsbach PH, Kohn DH,. Tissue engineering: State of the art in oral rehabilitation. J Oral Rehab 2009; 36: 368-389.
2. Filho RCCA, Oliveira TM, Neto NL, Gurgel C, Abdo RCC,. Reconstruction of bony facial contour deficiencies with polymethylmethacrylate implants: Case report. J Appl Oral Sci 2011; 19: 426-430.
3. Rotter N, Haisch A, Bucheler M,. Cartilage and bone tissue engineering for reconstructive head and neck surgery. Eur Arch Otorhinolaryngol 2005; 262: 539-545.
4. Costello BJ, Shah G, Kumta P, Sfeir CS,. Regenerative medicine for craniomaxillofacial surgery. Oral Maxillofac Surg Clin North Am 2010; 22: 33-42.
5. Becker ST, Warnke PH, Behrens E, Wiltfang Jr,. Morbidity after iliac crest bone graft harvesting over an anterior versus posterior approach. J Oral Maxillofac Surg 2011; 69: 48-53.
6. Silber J, Anderson G, Daffner S, Brislin B, Leland M, Hilibrand A, Vaccaro A, Albert T,. Donor site morbidity after anterior iliac crest bone harvest for single-level anterior cervical discectomy and fusion. Spine 2003; 28: 134-139.
7. Nocini P, Bedogni A, Valsecchi S, Trevisiol L, Ferrari F, Fior A, Saia G,. Fractures of the iliac crest following anterior and posterior bone graft harvesting. Review of the literature and case presentation. Minerva Stomatol 2003; 52: 448-452.
8. Hollinger J, Brekke J, Gruskin E, Lee D,. Role of bone substitutes. Clin Orthop Relat Res 1996; 324: 55-65.
9. Jackson IT, Yavuzer R,. Hydroxyapatite cement: An alternative for craniofacial skeletal contour refinements. Br J Plast Surg 2000; 53: 24-29.
10. Cho YR, Gosain AK,. Biomaterials in craniofacial reconstruction. Clin Plast Surg 2004; 31: 377-385.
11. Reckling FW,. Bone-cement interface temperature during total joint replacement. J Bone Joint Surg Am 1977; 59: 80-82.
12. DiMaio FR,. The science of bone cement: A historical review. Orthopedics 2002; 25: 1399-1407.
13. Hedberg EL, Kroese-Deutman HC, Shih CK, Crowther RS, Carney DH, Mikos AG, Jansen JA,. In vivo degradation of porous poly(propylene fumarate)/poly(DL -lactic-co-glycolic acid) composite scaffolds. Biomaterials 2005; 26: 4616-4623.
14. Mistry AS, Pham QP, Schouten C, Yeh T, Christenson EM, Mikos AG, Jansen JA,. In vivo bone biocompatibility and degradation of porous fumarate-based polymer/alumoxane nanocomposites for bone tissue engineering. J Biomed Mater Res Part A 2010; 92A: 451-462.
15. Timmer MD, Ambrose CG, Mikos AG,. In vitro degradation of polymeric networks of poly(propylene fumarate) and the crosslinking macromer poly(propylene fumarate)-diacrylate. Biomaterials 2003; 24: 571-577.
16. Peter SJ, Miller ST, Zhu G, Yasko AW, Mikos AG,. In vivo degradation of a poly(propylene fumarate)/beta-tricalcium phosphate injectable composite scaffold. J Biomed Mater Res 1998; 41: 1-7.
17. Fisher JP, Vehof JWM, Dean D, van der Waerden JPCM, Holland TA, Mikos AG, Jansen JA,. Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model. J Biomed Mater Res 2002; 59: 547-556.
18. Kim K, Dean D, Mikos AG, Fisher JP,. Effect of initial cell seeding density on early osteogenic signal expression of rat bone marrow stromal cells cultured on cross-linked poly(propylene fumarate) disks. Biomacromolecules 2009; 10: 1810-1817.
19. Fisher J, Holland T, Dean D, Engel P, Mikos A,. Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds. J Biomater Sci Polym Ed 2001; 12: 673-687.
20. Chu T-MG, Warden SJ, Turner CH, Stewart RL,. Segmental bone regeneration using a load-bearing biodegradable carrier of bone morphogenetic protein-2. Biomaterials 2007; 28: 459-467.
21. Henslee AM, Spicer PP, Yoon DM, Nair MB, Meretoja VV, Witherel KE, Jansen JA, Mikos AG, Kasper FK,. Biodegradable composite scaffolds incorporating an intramedullary rod and delivering bone morphogenetic protein-2 for stabilization and bone regeneration in segmental long bone defects. Acta Biomater 2011; 7: 3627-3637.
22. Peter SJ, Kim P, Yasko AW, Yaszemski MJ, Mikos AG,. Crosslinking characteristics of an injectable poly(propylene fumarate)/beta-tricalcium phosphate paste and mechanical properties of the crosslinked composite for use as a biodegradable bone cement. J Biomed Mater Res 1999; 44: 314-321.
23. Kim C, Mahar A, Perry A, Massie J, Lu L, Currier B, Yaszemski M,. Biomechanical evaluation of an injectable radiopaque polypropylene fumarate cement for kyphoplasty in a cadaveric osteoporotic vertebral compression fracture model. J Spinal Disorders Techniques 2007; 20: 604-609.
24. Langdown AJ, Tsai N, Auld J, Walsh WR, Walker P, Bruce WJM,. The influence of ambient theater temperature on cement setting time. J Arthroplasty 2006; 21: 381-384.
25. Haas S, Brauer G, Dickson G,. A characterization of polymethylmethacrylate bone cement. J Bone Joint Surg Am 1975; 57: 380-391.
26. Shi M, Kretlow JD, Nguyen A, Young S, Scott Baggett L, Wong ME, Kurtis Kasper F, Mikos AG,. Antibiotic-releasing porous polymethylmethacrylate constructs for osseous space maintenance and infection control. Biomaterials 2010; 31: 4146-4156.
27. Bruens ML, Pieterman H, Wijn JR, Vaandrager JM,. Porous polymethylmethacrylate as bone substitute in the craniofacial area. J Craniofac Surg 2003; 14: 63-68.
28. Shung AK, Timmer MD, Jo S, Engel PS, Mikos AG,. Kinetics of poly(propylene fumarate) synthesis by step polymerization of diethyl fumarate and propylene glycol using zinc chloride as a catalyst. J Biomater Sci Polym Ed 2002; 13: 95-108.
29. Kasper F, Tanahashi K, Fisher J, Mikos A,. Synthesis of poly(propylene fumarate). Nat Protoc 2009; 4: 518-525.
30. ASTM. Standard Specification for Acrylic Bone Cement. F451; 2008.
31. Vlad MD, del Valle LJ, Barraco M, Torres R, Lopez J, Fernandez E,. Iron oxide nanoparticles significantly enhances the injectability of apatitic bone cement for vertebroplasty. Spine 2008; 33: 2290-2298.
32. Khairoun I, Boltong MG, Driessens FCM, Planell JA,. Some factors controlling the injectability of calcium phosphate bone cements. J Mater Sci Mater Med 1998; 9: 425-428.
33. Timmer MD, Shin H, Horch RA, Ambrose CG, Mikos AG,. In vitro cytotoxicity of injectable and biodegradable poly(propylene fumarate)-based networks: Unreacted macromers, cross-linked networks, and degradation products. Biomacromolecules 2003; 4: 1026-1033.
34. Jack V, Buchanan FJ, Dunne NJ,. Particle attrition of alpha-tricalcium phosphate: Effect on mechanical, handling, and injectability properties of calcium phosphate cements. Proc Inst Mech Eng 2008; 222: 19-28.
35. Gbureck U, Barralet JE, Spatz K, Grover LM, Thull R,. Ionic modification of calcium phosphate cement viscosity. Part I: Hypodermic injection and strength improvement of apatite cement. Biomaterials 2004; 25: 2187-2195.
36. Timmer MD, Ambrose CG, Mikos AG,. Evaluation of thermal- and photo-crosslinked biodegradable poly(propylene fumarate)-based networks. J Biomed Mater Res Part A 2003; 66A: 811-818.