Mid-term clinical results of alumina medial pivot total knee arthroplasty

Knee Surgery, Sports Traumatology, Arthroscopy

Volumn 20, Issue 8, 2012, Pages 1514-1519

  Iida, Takahiro ^a   Minoda, Yukihide ^a   Kadoya, Yoshinori ^b   Matsui, Yoshio ^c   Kobayashi, Akio ^d   Iwaki, Hiroyoshi ^a   Ikebuchi, Mitsuhiko ^a   Yoshida, Taku ^a   Nakamura, Hiroaki ^a  

^a OSAKA CITY UNIVERSITY GRADUATE SCHOOL OF MEDICINE   (Japan)

^b Hanwa Joint Reconstruction Center   (Japan)

^c SAISEIKAI NAKATSU HOSPITAL   (Japan)

^d Department of Orthopaedic Surgery ^*  (Japan)

Author keywords

Alumina ceramic; Clinical results; Medial pivot design; Total knee arthroplasty

Indexed keywords

ALUMINUM OXIDE;

AGED; ARTICLE; BIOMECHANICS; CERAMICS; FEMALE; FOLLOW UP; HUMAN; JOINT CHARACTERISTICS AND FUNCTIONS; KNEE; KNEE ARTHROPLASTY; KNEE PROSTHESIS; MALE; MIDDLE AGED; PHYSIOLOGY; PROSTHESIS; REOPERATION; VERY ELDERLY;

AGED; AGED, 80 AND OVER; ALUMINUM OXIDE; ARTHROPLASTY, REPLACEMENT, KNEE; BIOMECHANICS; CERAMICS; FEMALE; FOLLOW-UP STUDIES; HUMANS; KNEE JOINT; KNEE PROSTHESIS; MALE; MIDDLE AGED; PROSTHESIS DESIGN; RANGE OF MOTION, ARTICULAR; REOPERATION;

EID: 84864393600     PISSN: 09422056     EISSN: 14337347     Source Type: Journal    
DOI: 10.1007/s00167-011-1734-3     Document Type: Article

References (44)

1. Akagi M, Nakamura T, Matsusue Y, Ueo T, Nishijyo K, Ohnishi E (2000) The Bisurface total knee replacement: a unique design for flexion. Four-to-nine-year follow-up study. J Bone Joint Surg Am 82: 1626-1633.
2. Anderson MJ, Kruse RL, Leslie C, Levy LJ Jr, Pritchett JW, Hodge J (2010) Medium-term results of total knee arthroplasty using a medially pivoting implant: a multicenter study. J Surg Orthop Adv 19: 191-195.
3. Bae DK, Song SJ, Cho SD (2011) Clinical outcome of total knee arthroplasty with medial pivot prosthesis a comparative study between the cruciate retaining and sacrificing. J Arthroplasty 26: 693-698.
4. Bal BS, Garino J, Ries M, Oonishi H (2007) Ceramic bearings in total knee arthroplasty. J Knee Surg 20: 261-270.
5. Barnes CL, Sharma A, Blaha JD, Nambu SN, Carroll ME (2011) Kneeling is safe for patients implanted with medial-pivot total knee arthroplasty designs. J Arthroplasty 26: 549-554.
6. Bellemans J, Banks S, Victor J, Vandenneucker H, Moemans A (2002) Fluoroscopic analysis of the kinematics of deep flexion in total knee arthroplasty. Influence of posterior condylar offset. J Bone Joint Surg Br 84: 50-53.
7. Blaha J (2002) A medial pivot geometry. Orthopedics 25: 963-964.
8. Cooper J, Dowson D, Fisher J, Jobbins B (1991) Ceramic bearing surfaces in total artificial joints: resistance to third body wear damage from bone cement particles. J Med Eng Technol 15: 63-67.
9. Dennis DA, Komistek RD, Mahfouz MR (2003) In vivo fluoroscopic analysis of fixed-bearing total knee replacements. Clin Orthop Relat Res 410: 114-130.
10. Ewald F (1989) The knee society total knee arthroplasty roentgenographic evaluation and scoring system. Clin Orthop Relat Res 248: 9-12.
11. Fan C, Hsieh J, Hsieh M, Shih Y, Lee C (2010) Primitive results after medial-pivot knee arthroplasties a minimum 5-year follow-up study. J Arthroplasty 25: 492-496.
12. Hanratty B, Thompson N, Wilson R, Beverland D (2007) The influence of posterior condylar offset on knee flexion after total knee replacement using a cruciate-sacrificing mobile-bearing implant. J Bone Joint Surg Br 89: 915-918.
13. Hossain F, Patel S, Haddad FS (2010) Midterm assessment of causes and results of revision total knee arthroplasty. Clin Orthop Relat Res 468: 1221-1228.
14. Insall J, Dorr L, Scott R, Scott W (1989) Rationale of the knee society clinical rating system. Clin Orthop Relat Res 248: 13-14.
15. Iwaki H, Pinskerova V, Freeman M (2000) Tibiofemoral movement 1: the shapes and relative movements of the femur and tibia in the unloaded cadaver knee. J Bone Joint Surg Br 82: 1189-1195.
16. Iwakiri K, Kobayashi A, Minoda Y, Iwaki H, Kadoya Y, Ohashi H, Takaoka K (2007) Difference between lowest points and contact points as a reference in 3D kinematic analysis of medial pivot knee arthroplasty. Trans Orthop Res Soc 32: 1826.
17. Julin J, Jämsen E, Puolakka T, Konttinen YT, Moilanen T (2010) Younger age increases the risk of early prosthesis failure following primary total knee replacement for osteoarthritis. A follow-up study of 32, 019 total knee replacements in the Finnish arthroplasty register. Acta Orthop 81: 413-419.
18. Karachalios T, Roidis N, Giotikas D, Bargiotas K, Varitimidis S, Malizos K (2009) A mid-term clinical outcome study of the advance medial pivot knee arthroplasty. Knee 16: 484-488.
19. Kim Y, Yoon S, Kim J (2009) Early outcome of TKA with a medial pivot fixed-bearing prosthesis is worse than with a PFC mobile-bearing prosthesis. Clin Orthop Relat Res 467: 493-503.
20. Kurtz S, Ong K, Lau E, Mowat F, Halpern M (2007) Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030. J Bone Joint Surg Am 89: 780-785.
21. Majima T, Yasuda K, Tago H, Aoki Y, Minami A (2008) Clinical results of posterior cruciate ligament retaining TKA with alumina ceramic condylar prosthesis: comparison to Co-Cr alloy prosthesis. Knee Surg Sports Traumatol Arthrosc 16: 152-156.
22. Mannan K, Scott G (2009) The Medial Rotation total knee replacement: a clinical and radiological review at a mean follow-up of six years. J Bone Joint Surg Br 91: 750-756.
23. Min B, Song K, Kang C, Bae K, Won Y, Lee K (2007) Delayed fracture of a ceramic insert with modern ceramic total hip replacement. J Arthroplasty 22: 136-139.
24. Minoda Y, Kobayashi A, Iwaki H, Iwakiri K, Inori F, Sugama R, Ikebuchi M, Kadoya Y, Takaoka K (2009) In vivo analysis of polyethylene wear particles after total knee arthroplasty: the influence of improved materials and designs. J Bone Joint Surg Am 91(Suppl 6): 67-73.
25. Minoda Y, Kobayashi A, Iwaki H, Miyaguchi M, Kadoya Y, Ohashi H, Takaoka K (2005) Polyethylene wear particle generation in vivo in an alumina medial pivot total knee prosthesis. Biomaterials 26: 6034-6040.
26. Minoda Y, Kobayashi A, Iwaki H, Miyaguchi M, Kadoya Y, Ohashi H, Yamano Y, Takaoka K (2003) Polyethylene wear particles in synovial fluid after total knee arthroplasty. Clin Orthop Relat Res 410: 165-172.
27. Miyazaki Y, Nakamura T, Kogame K, Saito M, Yamamoto K, Suguro T (2010) Analysis of the kinematics of total knee prostheses with a medial pivot design. J Arthroplasty 26: 1038-1044.
28. Mont M, Booth RJ, Laskin R, Stiehl J, Ritter M, Stuchin S, Rajadhyaksha A (2003) The spectrum of prosthesis design for primary total knee arthroplasty. Instr Course Lect 52: 397-407.
29. Moonot P, Mu S, Railton G, Field R, Banks S (2009) Tibiofemoral kinematic analysis of knee flexion for a medial pivot knee. Knee Surg Sports Traumatol Arthrosc 17: 927-934.
30. Ohnish H (1982) Cementless alumina ceramic total knee prosthesis. Orthop Ceramic Implants 1: 157-160.
31. Oonishi H, Aono M, Murata N, Kushitani S (1992) Alumina versus polyethylene in total knee arthroplasty. Clin Orthop Relat Res 282: 95-104.
32. Oonishi H, Ueno M, Kim S, Iwamoto M, Kyomoto M (2009) Ceramic versus cobalt-chrome femoral components; wear of polyethylene insert in total knee prosthesis. J Arthroplasty 24: 374-382.
33. Pritchett J (2004) Patient preferences in knee prostheses. J Bone Joint Surg Br 86: 979-982.
34. Pritchett JW (2011) Patients prefer a bicruciate-retaining or the medial pivot total knee prosthesis. J Arthroplasty 26: 224-228.
35. Ranawat C, Luessenhop C, Rodriguez J (1997) The press-fit condylar modular total knee system. Four-to-six-year results with a posterior-cruciate-substituting design. J Bone Joint Surg Am 79: 342-348.
36. Robertsson O, Bizjajeva S, Fenstad AM, Furnes O, Lidgren L, Mehnert F, Odgaard A, Pedersen AB, Havelin LI (2010) Knee arthroplasty in Denmark, Norway and Sweden. Acta Orthop 81: 82-89.
37. Saari T, Uvehammer J, Carlsson L, Herberts P, Regnér L, Kärrholm J (2003) Kinematics of three variations of the Freeman-Samuelson total knee prosthesis. Clin Orthop Relat Res 410: 235-247.
38. Schmidt R, Komistek R, Blaha J, Penenberg B, Maloney W (2003) Fluoroscopic analyses of cruciate-retaining and medial pivot knee implants. Clin Orthop Relat Res 410: 139-147.
39. Shakespeare D, Ledger M, Kinzel V (2006) Flexion after total knee replacement. A comparison between the medial pivot knee and a posterior stabilised implant. Knee 13: 371-373.
40. Stiehl J, Komistek R, Cloutier J, Dennis D (2000) The cruciate ligaments in total knee arthroplasty: a kinematic analysis of 2 total knee arthroplasties. J Arthroplasty 15: 545-550.
41. Ueno M, Nakamura T, Akagi M (2002) Comparison of the wear properties of polyethylene plate in total knee prostheses (TKP) using different femoral component materials. Bioceramics 15: 801-804.
42. van Duren BH, Pandit H, Beard DJ, Zavatsky AB, Gallagher JA, Thomas NP, Shakespeare DT, Murray DW, Gill HS (2007) How effective are added constraints in improving TKR kinematics? J Biomech 40(Suppl 1): S31-S37.
43. Victor J, Banks S, Bellemans J (2005) Kinematics of posterior cruciate ligament-retaining and -substituting total knee arthroplasty: a prospective randomised outcome study. J Bone Joint Surg Br 87: 646-655.
44. Yasuda K, Miyagi N, Kaneda K (1993) Low friction total knee arthroplasty with the alumina ceramic condylar prosthesis. Bull Hosp Jt Dis 53: 15-21.