Effect of air abrasion and thermocycling on resin adaptation and shear bond strength to dentin for an etch-and-rinse and self-etch resin adhesive

Dental Materials Journal

Volumn 31, Issue 2, 2012, Pages 180-188

  Freeman, Rebecca ^a   Varanasi, Srinivas ^a   Meyers, Ian A ^a   Symons, Anne L ^a  

^a UNIVERSITY OF QUEENSLAND   (Australia)

Author keywords

Air abrasion; Confocal microscopy; Resin adhesive

Indexed keywords

ADHESIVE SYSTEMS; AIR ABRASION; COMPOSITE RESINS; DEFECT FORMATION; HYBRID LAYER; IN-VITRO; RESIN ADHESIVES; RESIN TAGS; SELF-ETCH; SELF-ETCH ADHESIVES; SHEAR BOND STRENGTHS;

ABRASION; ADHESIVES; BOND STRENGTH (MATERIALS); CONFOCAL MICROSCOPY; THERMAL CYCLING; TRIBOLOGY;

RESINS;

BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; DENTIN BONDING AGENT; PROMPT L POP; PROMPT L-POP; RESIN; RESIN CEMENT; SINGLE BOND;

ARTICLE; CONFOCAL MICROSCOPY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL PROCEDURE; DENTAL SURGERY; DENTIN; EVALUATION; HEAT; HUMAN; METHODOLOGY; SHEAR STRENGTH; SURFACE PROPERTY; TOOTH PERMEABILITY;

ACID ETCHING, DENTAL; AIR ABRASION, DENTAL; BISPHENOL A-GLYCIDYL METHACRYLATE; COMPOSITE RESINS; DENTAL BONDING; DENTAL CAVITY PREPARATION; DENTAL STRESS ANALYSIS; DENTIN; DENTIN PERMEABILITY; DENTIN-BONDING AGENTS; HOT TEMPERATURE; HUMANS; MICROSCOPY, CONFOCAL; RESIN CEMENTS; SHEAR STRENGTH; SURFACE PROPERTIES;

EID: 84864254011     PISSN: 02874547     EISSN: 18811361     Source Type: Journal    
DOI: 10.4012/dmj.2011-146     Document Type: Article

References (50)

1. Peumans M, Kanumilli P, De Munck J, Van Landuyt K, Lambrechts P, Van Meerbeek B. Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Mater 2005; 21: 864-881.
2. Mjor IA, Gordan VV. Failure, repair, refurbishing and longevity of restorations. Oper Dent 2002; 27: 528-534.
3. Hickel R, Manhart J. Longevity of restorations in posterior teeth and reasons for failure. J Adhes Dent 2001; 3: 45-64.
4. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore Memorial Lecture: Adhesion to enamel and dentin: Current status and future challenges. Oper Dent 2003; 28: 215-235.
5. Peumans M, Munck J, Van Landuyt K, Lambrechts P, Van Meerbeek B. Three-year clinical effectiveness of a two-step self-etch adhesive in cervical lesions. Eur J Oral Sci 2005; 113: 512-518.
6. Perdigao J. New developments in dental adhesion. Dent Clin North Am 2007; 51: 333-357.
7. Pashley DH. The effects of acid etching on the pulpodentin complex. Oper Dent 1992; 17: 229-242.
8. Nakabayashi N, Nakamura M, Yasuda N. Hybrid layer as a dentin-bonding mechanism. J Esthet Dent 1991; 3: 133-138.
9. Titley K, Chernecky R, Chan A, Smith D. The composition and ultrastructure of resin tags in etched dentin. Am J Dent 1995; 8; 224-230.
10. Ferrari M, Davidson CL. In vivo resin-dentin interdiffusion and tag formation with lateral branches of two adhesive systems. J Prosthet Dent 1996; 76: 250-253.
11. Patierno JM, Rueggeberg FA, Anderson RW, Weller RN, Pashley DH. Push-out strength and SEM evaluation of resin composite bonded to internal cervical dentin. Endod Dent Traumatol 1996; 12: 227-236.
12. Kurtz JS, Perdigao J, Geraldeli S, Hodges JS, Bowles WR. Bond strengths of tooth-colored posts, effect of sealer, dentin adhesive, and root region. Am J Dent 2003; 16: 31A-33A.
13. Mallmann A, Jacques LB, Valandro LF, Mathias P, Muench A. Microtensile bond strength of light- and self-cured adhesive systems to intraradicular dentin using a translucent fiber post. Oper Dent 2005; 30: 500-506.
14. Tay FR, Pashley DH. Aggressiveness of contemporary self-etching systems. I: depth of penetration beyond dentin smear layers. Dent Mater 2001; 17: 296-308.
15. Kremeier K, Fasen L, Klaiber B, Hofmann N. Influence of endodontic post type (glass fiber, quartz fiber or gold) and luting material on push-out bond strength to dentin in vitro. Dent Mater 2008; 24: 660-666.
16. Leite FRM, Capote TS, Zuanon ACC. Application of total etching technique or self-etching primers on primary teeth after air abrasion. Braz Oral Res 2005; 19: 198-202.
17. Mujdeci A, Gokay O. The effect of airborne-particle abrasion on the shear bond strength of four restorative materials to enamel and dentin. J Prosthet Dent 2004; 92: 245-249.
18. Brockmann S, Scott R, Eick J. The effect of an air-polishing device on tensile bond strength of a dental sealant. Quintessence Int 1989; 20: 211-216.
19. Hannig M, Femerling T. Influence of air-abrasion treatment on the interfacial bond between composite and dentin. Oper Dent 1998; 23: 258-265.
20. Goldstein RE, Parkins FM. Air-abraded technology: its new role in restorative dentistry. J Am Dent Assoc 1994; 125: 551-557.
21. Berry EA, Ward M: Bond strength of resin composite to air-abraded enamel. Quintessence Int 1995; 26: 559-562.
22. Moritz A, Gutknecht N, Schoop U, Goharkhay K, Wernisch J, Sperr WGN. Alternatives in enamel conditioning: a comparison of conventional and innovative methods. J Clin Laser Med Surg 1996; 14: 133-136.
23. Laurell KA Hess JA. Scanning electron micrographic effects of air-abrasion cavity preparation on human enamel and dentin, Quintessence Int 1995; 26:139-144.
24. Perdigao J, Gomes G, Lopes MM. Influence of conditioning time on enamel adhesion, Quintessence Int 2006; 37: 35-41.
25. Eliguzeloglu E, Omurlu H, Eskitascioglu G, Belli S. Effect of surface treatments and different adhesives on the hybrid layer thickness of non-carious cervical lesions. Oper Dent 2008; 33: 338-345.
26. Perdigao J, Lambrechts P, VanMeerbeek B, Braem M, Yildiz E, Yucel T, Vanherle G. The interaction of adhesive systems with human dentin. Am J Dent 1996; 9: 167-173.
27. Eick JD, Cobb CM, Chappell RP, Spencer P, Robinson SJ. The dentinal surface: its influence on dentinal adhesion. Part I. Quintessence Int 1991; 22: 967-977.
28. Suzuki T, Finger, WJ. Dentin adhesives: site of denin vs. bonding of composite resins. Dent Mater 1988; 4: 379-383.
29. Gwinnett AJ. Smear layer: morphological considerations. Oper Dent 1984; 3: 3-12.
30. Nikaido T, Kataumi M, Burrow MF, Inokoshi S, Yamada T, Takatsu T. Bond strengths of resin to enamel and dentin treated with low-pressure air abrasion. Oper Dent 1996; 21: 218-224.
31. Roeder LB, Berry EA, You C, Powers JM. Bond strength of composite to air-abraded enamel and dentin. Oper Dent 1995; 20: 186-190.
32. Pashley DH, Carvalho RM. Dentine permeability and dentine adhesion. J Dent 1997; 25: 355-372.
33. Perdigao J, Lopes L, Lambrechts P, Leitao J, Van Meerbeek B, Vanherle G. Effects of a self-etching primer on enamel shear bond strengths and SEM morphology. Am J Dent 1997; 10: 141-146.
34. Van Meerbeek B, De Munck J, Mattar D, Van Landuyt K, Lambrechts P. Microtensile bond strengths of an etch & rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper Dent 2003; 28: 647-660.
35. Walshaw PR, McComb D. SEM evaluation of the resin-dentin interface with proprietary bonding agents in human subjects. J Dent Res 1994; 73: 1079-1087.
36. Giachetti L, Bertini F, Russo DS. Investigation into the nature of dentin resin tags: A scanning electron microscopic morphological analysis of demineralized bonded dentin. J Prosthet Dent 2004; 92: 233-238.
37. Tay FR, Gwinnett AJ, Pang KM, Wei SHY. Structural evidence of a sealed tissue interface with a total-etch wet-bonding technique in-vivo. J Dent Res 1994; 73: 629-636.
38. Pashley DH. Clinical correlations of dentin structure and function. J Prosthet Dent 1991; 66: 777-781.
39. Nikaido T, Yamada T, Koh Y, Burrow MF, Takatsu T. Effect of air-powder polishing on adhesion of bonding systems to tooth substrates. Dent Mater 1995; 11: 258-264.
40. Geitel B, Wischnewski R, Jahn KR, Barthel CR, Zimmer S, Roulet JF. Tensile bond strength of composite to air-abraded dentin. Oper Dent 2004; 29: 69-74.
41. Crim GA, Garcia-Godoy F. Microleakage: the effect of storage and cycling duration. J Prosthet Dent 1987; 57: 574-576.
42. Inoue S, Koshiro K, Yoshida Y, De Munck J, Nagakane K, Suzuki K, Sano H, Van Meerbeek B. Hydrolytic stability of self-etch adhesives bonded to dentin. J Dent Res 1990; 69: 1160-1164.
43. ISO. Guidance on testing of adhesion to tooth structure. International Organization for Standardization. TR 11405, 1-14. Geneva (Switzerland): 1994.
44. Santos PA, Garcia PPNS, Palma-Dibb RG. Shear bond strength of adhesive systems to enamel and dentin. Thermocycling influence. J Mater Sci Mater Med 2005; 16: 727-732.
45. Ilday N, Gungor H, Duymus ZY. Dentine treatment effects on bonding strength of adhesive resin cements. Mater Res Innov 2011; 15: 202-207.
46. Los SA, Barkmeier WW. Effects of dentin air abrasion with aluminium-oxide and hydroxyapatite on adhesive bond strength. Oper Dent 1994; 19: 169-175.
47. Ferdianakis K, White GE. Newer class I cavity preparation for permanent teeth using air abrasion and composite restoration. J Clin Pediatr Dent 1999; 23: 201-216.
48. Manhart J, Mehl A, Schroeter R, Obster B, Hickel R. Bond strength of composite to dentin treated by air abrasion. Oper Dent 1999; 24: 223-232.
49. Bowen RL. Adhesion bonding of various materials to hard tooth tissue-solubility of dentinal smear layer in diluted acid buffers. Int Dent J 1978; 28: 97-107.
50. Amaral FL, Colucci V, Palma-Dibb RG, Corona SA. Assessment of in vitro methods used to promote adhesive interface degradation: a critical review. J Esthet Restor Dent 2007; 19: 340-353.