Morphology and mechanical property changes in compatibilized high density polyethylene/polyamide 6 nanocomposites induced by carbon nanotubes

Polymer International

Volumn 61, Issue 8, 2012, Pages 1334-1343

  Xiang, Fangming ^a   Wang, Yonghong ^a   Shi, Yunyun ^a   Huang, Ting ^a   Chen, Chen ^b   Peng, Ya ^c   Wang, Yong ^a,d  

^a SOUTHWEST JIAOTONG UNIVERSITY   (China)

^b SICHUAN UNIVERSITY   (China)

^c XIHUA UNIVERSITY   (China)

^d State Key Lab of Polymer Materials Engineering ^*  (China)

Author keywords

Carbon nanotubes; HDPE PA6; Morphology; Reinforcement and toughening

Indexed keywords

CO-CONTINUOUS MORPHOLOGY; ELECTRICAL CONDUCTIVITY; FUNCTIONALIZED MULTI-WALLED CARBON NANOTUBES; IMMISCIBLE POLYMER BLENDS; MELTING BEHAVIOR; MORPHOLOGY AND MECHANICAL PROPERTIES; PHASE MORPHOLOGY; POTENTIAL APPLICATIONS; REINFORCEMENT EFFECTS; TOUGHENING EFFECTS;

CARBON NANOTUBES; DIFFERENTIAL SCANNING CALORIMETRY; ELECTRIC CONDUCTIVITY; MALEIC ANHYDRIDE; MECHANICAL PROPERTIES; MULTIWALLED CARBON NANOTUBES (MWCN); NANOCOMPOSITES; POLYMER BLENDS; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY;

MORPHOLOGY;

EID: 84863992231     PISSN: 09598103     EISSN: 10970126     Source Type: Journal    
DOI: 10.1002/pi.4213     Document Type: Article

References (48)

1. Wong EW, Sheehan PE and Lieber CM, Science 277: 1971-1975 (1997).
2. Yu MF, Lourie O, Dyer MJ, Moloni K, Kelly TF and Ruoff RS, Science 287: 637-640 (2000).
3. Coleman JN, Khan U and Gun'ko YK, Adv Mater 18: 1-18 (2006).
4. Qian D, Dickey EC, Andrews R and Rantell T, Appl Phys Lett 76: 2868-2870 (2000).
5. Blond D, Barron V, Ruether MK, Ryan P, Nicolosi V, Blau WJ, et al, Adv Funct Mater 16: 1608-1614 (2006).
6. Zhu J, Peng HQ, Rodriguez-Macias FR, Margrave JL, Khabashesku VN, Imam AM, et al, Adv Funct Mater 14: 643-648 (2004).
7. Zhang H and Zhang Z, Euro Polym J 43: 3197-3207 (2007).
8. Ganß M, Satapathy BK, Thunga M, Weidisch R, Pötschke P and Jehnichen D, Acta Mater 56: 2247-2261 (2008).
9. Ruan SL, Gao P, Yang XG and Yu TX, Polymer 44: 5643-5654 (2003).
10. Sandler JKW, Kirk JE, Kinloch IA, Shaffer MSP and Windle AH, Polymer 44: 5893-5899 (2003).
11. Pötschke P, Bhattacharyya AR and Janke A, Polymer 44: 8061-8069 (2003).
12. Pötschke P, Bhattacharyya AR and Janke A, Carbon 42: 965-969 (2004).
13. Wu M and Shaw L, J Appl Polym Sci 99: 477-488 (2006).
14. Bose S, Bhattacharyya AR, Kodgire PV, Kulkarni AR and Misra A, J Nanosci Nanotech 8: 1867-1879 (2008).
15. Li Y and Shimizu H, Macromolecules 41: 5339-5344 (2008).
16. Bose S, Bhattacharyya AR, Khare RA, Kulkarni AR and Pötschke P, Macromol Symp 263: 11-20 (2008).
17. Göldel A, Kasaliwal G and Pötschke P, Macromol Rapid Commun 30: 423-429 (2009).
18. Sumita M, Sakata K, Asai S, Miyasaka K and Nakagawa H, Polym Bull 25: 265-271 (1991).
19. Bose S, Bhattacharyya AR, Bondre AP, Kulkarni AR and Pötschke P, J Polym Sci Part B, Polym Phys 46: 1619-1631 (2008).
20. Zou H, Wang K, Zhang Q and Fu Q, Polymer 47: 7821-7826 (2006).
21. Martins CG, Larocca NM, Paul DR and Pessan LA, Polymer 50: 1743-1754 (2009).
22. Khare RA, Bhattacharyya AR, Kulkarni AR, Saroop M and Biswas A, J Polym Sci Part B, Polym Phys 46: 2286-2295 (2008).
23. Zhang L, Wan C and Zhang Y, Compos Sci Technol 69: 2212-2217 (2009).
24. Shen Y, Guo Z, Cheng J and Fang Z, J Appl Polym Sci 116: 1322-1328 (2010).
25. Lim SK, Hong EP, Song YH, Choi HJ and Chin IJ, Macromol Mater Eng 295: 329-335 (2010).
26. Valentini L, Biagiotti J, Kenny JM and López Manchado MA, J Appl Polym Sci 89: 2657-2663 (2003).
27. Meincke O, Kaempfer D, Weickmann H, Friedrich C, Vathauer M and Warth H, Polymer 45: 739-748 (2004).
28. Liu L, Wang Y, Li YL, Wu J, Zhou ZW and Jiang CX, Polymer 50: 3072-3078 (2009).
29. Xiang FM, Wu J, Liu L, Huang T, Wang Y, Chen C, et al, Polym Adv Technol 22: 2533-2542 (2011).
30. Filippi S, Minkova L, Dintcheva N, Narducci P and Magagnini P, Polymer 46: 8054-8061 (2005).
31. Fornes TD and Paul DR, Polymer 44: 3945-3961 (2003).
32. Wunderlich B and Cormier CM, J Polym Sci Part A-2: Polym Phys 5: 987-988 (1967).
33. Zhang L, Wan C and Zhang Y, Polym Eng Sci 49: 1909-1917 (2009).
34. Baudouin AC, Bailly C and Devaux J, Polym Deg Stab 95: 389-398 (2010).
35. Baudouin AC, Devaux J and Bailly C, Polymer 51: 1341-1354 (2010).
36. Wu S, Polymer Interface and Adhesion. Marcel Dekker, New York (1982).
37. Owens DK and Wendt RC, J Appl Polym Sci 13: 1741-1747 (1969).
38. Kälble DH and Cirlin EH, J Polym Sci 9: 363-368 (1971).
39. Son Y, Polymer 42: 1287-1291 (2001).
40. Nuriel S, Liu L, Barber AH and Wagner HD, Chem Phys Lett 404: 263-266 (2005).
41. Krause B, Pötschke P and Häußler L, Compos Sci Technol 69: 1505-1515 (2009).
42. Li HX and Hu GH, J Polym Sci Part B, Polym Phys 39: 601-610 (2001).
43. Wang Y, Zhang Q and Fu Q, Macromol Rapid Commun 24: 231-235 (2003).
44. Hong JS, Namkung H, Ahn KH, Lee SJ and Kim C, Polymer 47: 3967-3975 (2006).
45. Bose S, Bhattacharyya AR, Kodgire PV and Misra A, Polymer 48: 356-362 (2007).
46. Wu J, Xiang FM, Han L, Huang T, Wang Y, Peng Y, et al, Polym Eng Sci 51: 585-591 (2011).
47. Liu TX, Phang IY, Shen L, Chow SY and Zhang WD, Macromolecules 37: 7214-7222 (2004).
48. Xu DH and Wang ZG, Polymer 49: 330-338 (2008).