Design of a hybrid integrated EMC filter for a DC-DC power converter

IEEE Transactions on Power Electronics

Volumn 27, Issue 11, 2012, Pages 4380-4390

  Ali, Marwan ^a   Labouré, Eric ^b   Costa, François ^a   Revol, Bertrand ^a  

^a Centre National de la Recherche Scientifique   (France)

^b UNIVERSITÉ PARIS SACLAY   (France)

Author keywords

Common and differential mode interferences; electromagnetic compatibility; electromagnetic interference (EMI) hybrid filter; integration of passive components

Indexed keywords

BLACK BOXES; DC-DC POWER; DC-DC POWER CONVERTER; DIFFERENTIAL MODE; ELECTRICAL STRUCTURES; FILTER ARCHITECTURE; FUNCTIONAL PROTOTYPES; HYBRID FILTERS; HYBRID INTEGRATION; HYBRID SOLUTION; INTEGRATED EMI FILTERS; OPTIMAL FILTERING; PASSIVE COMPONENTS; POWER SUPPLY;

DC-DC CONVERTERS; ELECTRIC POWER SYSTEMS; ELECTROMAGNETIC COMPATIBILITY; ELECTROMAGNETIC PULSE; FILTRATION; INTEGRATION; REGULATORY COMPLIANCE; STRUCTURAL DESIGN;

ACTIVE FILTERS;

EID: 84862998228     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2012.2183387     Document Type: Article

References (34)

1. I. Omura, W. Saito, T. Domon, and K. Tsuda, "Gallium nitride power HEMT for high switching frequency power electronics," in Proc. Int. Workshop Physics of Semiconductor Devices, 2007, pp. 781-786.
2. M. Besacier,M. Coyaud, J. Schanen, J. Roudet, and B. Rivet, "Hybrid Si-SiC fast switching cell modelling and characterisation including parasitic environment description by PEEC method," in Proc. IEEE 33rd Annu. Power Electron. Spec. Conf., 2002, pp. 1753-1757. (Pubitemid 35411302)
3. X. Pei, J. Xiong, Y. Kang, and J. Chen, "Conducted EMI emission in PWM inverter," in Proc. 4th Int. Conf. Power Electron. Motion Control, 2004, vol. 2, pp. 630-635. (Pubitemid 40539802)
4. T. Ninomiya, M. Shoyama, C.-F. Jin, and G. Li, "EMI issues in switching power converters," in Proc. 13th Int. Symp. Power Semicond. Devices ICs, 2001, pp. 81-86.
5. H. Akagi and T. Shimizu, "Attenuation of conducted EMI emissions from an inverter-driven motor," IEEE Trans. Power Electron., vol. 23, no. 1, pp. 282-290, Jan. 2008.
6. K. Raggl, T. Nussbaumer, and J. Kolar, "Guideline for a simplified differential-mode EMI filter design," IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 1031-1040, Mar. 2010.
7. A. C. Baisden, D. Boroyevich, and F. Wang, "Generalized terminal modeling of electromagnetic interference," IEEE Trans. Ind. Appl., vol. 46, no. 5, pp. 2068-2079, Sep./Oct. 2010.
8. P.-S. Chen and Y.-S. Lai, "Effective EMI filter design method for threephase inverter based upon software noise separation," IEEE Trans. Power Electron., vol. 25, no. 11, pp. 2797-2806, Nov. 2010.
9. L. LaWhite and M. Schlecht, "Design of active ripple filters for power circuits operating in the 1-10MHz range," IEEE Trans. Power Electron., vol. 3, no. 3, pp. 310-317, Jul. 1988.
10. M. Di Piazza, G. Tine, and G. Vitale, "An improved active common-mode voltage compensation device for induction motor drives," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1823-1834, Apr. 2008. (Pubitemid 351585995)
11. S. Wang, J. van Wyk, and F. Lee, "Effects of interactions between filter parasitics and power interconnects on EMI filter performance," IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 3344-3352, Dec. 2007.
12. J. Biela, A.Wirthmueller,R.Waespe,M.Heldwein,K.Raggl, and J.Kolar, "Passive and active hybrid integrated EMI filters," IEEE Trans. Power Electron., vol. 24, no. 5, pp. 1340-1349, May 2009.
13. P. Pairodamonchai, S. Suwankawin, and S. Sangwongwanich, "Design and implementation of a hybrid output EMI filter for high-frequency commonmode voltage compensation in PWM inverters," IEEE Trans. Ind. Appl., vol. 45, no. 5, pp. 1647-1659, Sep./Oct. 2009.
14. S. Wang, Y. Maillet, F. Wang, D. Boroyevich, and R. Burgos, "Investigation of hybrid EMI filters for common-mode EMI suppression in a motor drive system," IEEE Trans. Power Electron., vol. 25, no. 4, pp. 1034-1045, Apr. 2010.
15. F. Giezendanner, J. Biela, J. Kolar, and S. Zudrell-Koch, "EMI noise prediction for electronic ballasts," IEEE Trans. Power Electron., vol. 25, no. 8, pp. 2133-2141, Aug. 2010.
16. A. Farhadi and A. Jalilian, "Modeling and simulation of electromagnetic conducted emission due to power electronics converters," in Proc. Int. Conf. Power Electron., Drives Energy Syst., 2006, pp. 1-6.
17. Y. Panov and M. Jovanovic, "Practical issues of input/output impedance measurements in switching power supplies and application of measured data to stability analysis," in Proc. 20th Annu. IEEE Appl. Power Electron. Conf. Expo., 2005, vol. 2, pp. 1339-1345. (Pubitemid 43860957)
18. J. Meng,W. Ma, Q. Pan, L. Zhang, and Z. Zhao, "Multiple slope switching waveform approximation to improve conducted EMI spectral analysis of power converters," IEEE Trans. Electromagn. Compat., vol. 48, no. 4, pp. 742-751, Nov. 2006. (Pubitemid 46417196)
19. F. Costa, C. Vollaire, and R. Meuret, "Modeling of conducted common mode perturbations in variable-speed drive systems," IEEE Trans. Electromagn. Compat., vol. 47, no. 4, pp. 1012-1021, Nov. 2005. (Pubitemid 43174027)
20. V. Tarateeraseth, Bo Hu, Kye Yak See, and F. Canavero, "Accurate extraction of noise source impedance of an SMPS under operating conditions," IEEE Trans. Power Electron., vol. 25, no. 1, pp. 111-117, Jan. 2010.
21. T. Nussbaumer, M. Heldwein, and J. Kolar, "Differential mode input filter design for a three-phase buck-type PWM rectifier based on modeling of the EMC test receiver," IEEE Trans. Ind. Electron., vol. 53, no. 5, pp. 1649-1661, Oct. 2006. (Pubitemid 44593516)
22. W. Ho, C. Lee, X. Liu, P. Chan, S. Hui, and et Y. Lee, "A hybrid EMI filter with ultra-wide bandwidth," in Proc. 23rd Annu. IEEE Appl. Power Electron. Conf. Expo., 2008, pp. 676-681.
23. R. Chen, J. van Wyk, S. Wang, and W. Odendaal, "Technologies and characteristics of integrated EMI filters for switch mode power supplies," in Proc. IEEE 35th Annu. Power Electron. Spec. Conf., 2004, vol. 6, pp. 4873-4880.
24. B.-C. Tseng, L.-C. Liao, and J.-Y. Ling, "Bandwidth improvement of multilayer common mode filter by time domain method," in Proc. IEEE Int. Symp. Electromagn. Compat., 2009, pp. 171-175.
25. R. Chen, F. Canales, B. Yang, P. Barbosa, J. van Wyk, and F. Lee, "Integration of electromagnetic passive components in DPS front-end DC/DC converter-A comparative study of different integration steps," in Proc. 18th Annu. IEEE Appl. Power Electron. Conf. Expo., Miami Beach, FL, pp. 1137-1142.
26. E. Waffenschmidt, B. Ackermann, and J. Ferreira, "Design method and material technologies for passives in printed circuit board embedded circuits," IEEE Trans. Power Electron., vol. 20, no. 3, pp. 576-584, May 2005. (Pubitemid 40715006)
27. Q. Chen, Z. Gong, X. Yang, Z. Wang, and L. Zhang, "Design considerations for passive substrate with ferrite materials embedded in printed circuit board (PCB)," in Proc. IEEE Power Electron. Spec. Conf., 2007, pp. 1043-1047.
28. [Online]. Available: http://www.faradflex.com
29. S. Wang, F. Lee, and J. van Wyk, "A study of integration of parasitic cancellation techniques for EMI filter design with discrete components," IEEE Trans. Power Electron., vol. 23, no. 6, pp. 3094-3102, Nov. 2008.
30. R. Huang, D. Zhang, and K. Tseng, "Determination of dimensionindependent magnetic and dielectric properties for Mn-Zn ferrite cores and its EMI applications," IEEE Trans. Electromagn. Compat., vol. 50, no. 3, pp. 597-602, Aug. 2008.
31. S. Wang, F. Lee, and J. van Wyk, "Inductor winding capacitance cancellation using mutual capacitance concept for noise reduction application," IEEE Trans. Electromagn. Compat., vol. 48, no. 2, pp. 311-318, May 2006. (Pubitemid 43811377)
32. J. Kotny, X. Margueron, and N. Idir, "High frequency modeling method of EMIfilters," in Proc. IEEEEnergy Convers. Congr.Expo., 2009, pp. 1671-1678.
33. M. Heldwein, H. Ertl, J. Biela, and J. Kolar, "Implementation of a transformer-less common mode active filter for off-line converter systems," in Proc. 21st Annu. IEEE Appl. Power Electron. Conf. Expo., 2006, p. 7.
34. K. Mainali and R. Oruganti, "Design of a current-sense voltage-feedback common mode EMI filter for an off-line power converter," in Proc. IEEE Power Electron. Spec. Conf., 2008, pp. 1632-1638.