-
1
-
-
0034980107
-
Influence of mixing techniques on the physical properties of acrylic bone cement
-
N.J. Dunne, and J.F. Orr Influence of mixing techniques on the physical properties of acrylic bone cement Biomaterials 22 2001 1819
-
(2001)
Biomaterials
, vol.22
, pp. 1819
-
-
Dunne, N.J.1
Orr, J.F.2
-
2
-
-
81455154389
-
Effect of vacuum-treatment on deformation properties of PMMA bone cement
-
F. Zivic, M. Babica, N. Grujovic, S. Mitrovic, G. Favaro, and N. Caunii Effect of vacuum-treatment on deformation properties of PMMA bone cement J. Mech. Behav. Biomed. Mater. 5 2011 129
-
(2011)
J. Mech. Behav. Biomed. Mater.
, vol.5
, pp. 129
-
-
Zivic, F.1
Babica, M.2
Grujovic, N.3
Mitrovic, S.4
Favaro, G.5
Caunii, N.6
-
3
-
-
0033808966
-
The creep properties of three new low temperature-curing bone cements: A pre-clinical assessment
-
N. Verdonschot, and R. Huiskes The creep properties of three new low temperature-curing bone cements: a pre-clinical assessment J. Biomed. Mater. Res. 53 2000 498
-
(2000)
J. Biomed. Mater. Res.
, vol.53
, pp. 498
-
-
Verdonschot, N.1
Huiskes, R.2
-
4
-
-
0031172484
-
Properties of acrylic bone cement: State of the art review
-
G. Lewis Properties of acrylic bone cement: state of the art review J. Appl. Biomater. 38 1997 155
-
(1997)
J. Appl. Biomater.
, vol.38
, pp. 155
-
-
Lewis, G.1
-
5
-
-
15944424328
-
Influence of the method of blending an antibiotic powder with an acrylic bone cement powder on physical, mechanical, and thermal properties of the cured cement
-
G. Lewis, S. Janna, and A. Bhattaram Influence of the method of blending an antibiotic powder with an acrylic bone cement powder on physical, mechanical, and thermal properties of the cured cement Biomaterials 26 2005 4317
-
(2005)
Biomaterials
, vol.26
, pp. 4317
-
-
Lewis, G.1
Janna, S.2
Bhattaram, A.3
-
7
-
-
0028249007
-
Abrasive wear of ceramic, metal, and UHMWPE bearing surfaces from third-body bone, PMMA bone cement, and titanium debris
-
J.A. Davidson, R.A. Poggie, and A.K. Mishra Abrasive wear of ceramic, metal, and UHMWPE bearing surfaces from third-body bone, PMMA bone cement, and titanium debris Biomed. Mater. Eng. 4 1994 213
-
(1994)
Biomed. Mater. Eng.
, vol.4
, pp. 213
-
-
Davidson, J.A.1
Poggie, R.A.2
Mishra, A.K.3
-
8
-
-
84863448627
-
Nano/micro scale investigation of tribological and mechanical properties of epoxy/MWNT nanocomposite
-
M.R. Ayatollahi, S. Doagou-R and S. Shadlou, Nano/micro scale investigation of tribological and mechanical properties of epoxy/MWNT nanocomposite, Macromol. Mater. Eng., in press.
-
Macromol. Mater. Eng.
-
-
Ayatollahi, M.R.1
Doagou-R, S.2
Shadlou, S.3
-
9
-
-
33745966625
-
Nanoindentation studies on nylon 11/clay nanocomposites
-
Y. Hu, L. Shen, H. Yang, M. Wang, T. Liu, T. Liang, and J. Zhang Nanoindentation studies on nylon 11/clay nanocomposites Polym. Test. 25 2006 492
-
(2006)
Polym. Test.
, vol.25
, pp. 492
-
-
Hu, Y.1
Shen, L.2
Yang, H.3
Wang, M.4
Liu, T.5
Liang, T.6
Zhang, J.7
-
10
-
-
4744365142
-
Morphology and mechanical properties of multiwalled carbon nanotubes reinforced nylon-6 composites
-
T.X. Liu, I.Y. Phang, L. Shen, S.Y. Chow, and W.-D. Zhang Morphology and mechanical properties of multiwalled carbon nanotubes reinforced nylon-6 composites Macromolecules 37 2004 7214
-
(2004)
Macromolecules
, vol.37
, pp. 7214
-
-
Liu, T.X.1
Phang, I.Y.2
Shen, L.3
Chow, S.Y.4
Zhang, W.-D.5
-
11
-
-
72449195174
-
Comparative analysis on the nanoindentation of polymers using atomic force microscopy
-
A. Jee, and M. Lee Comparative analysis on the nanoindentation of polymers using atomic force microscopy Polym. Test. 29 2010 95
-
(2010)
Polym. Test.
, vol.29
, pp. 95
-
-
Jee, A.1
Lee, M.2
-
12
-
-
0035803899
-
Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results
-
T. Chudoba, and F. Richter Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results Surf. Coatings Technol. 148 2001 191
-
(2001)
Surf. Coatings Technol.
, vol.148
, pp. 191
-
-
Chudoba, T.1
Richter, F.2
-
13
-
-
9944223661
-
Correcting power-law viscoelastic effects in elastic modulus measurement using depth-sensing indentation
-
A.H.W. Ngan, H.T. Wang, B. Tang, and K.Y. Sze Correcting power-law viscoelastic effects in elastic modulus measurement using depth-sensing indentation Int. J. Solid. Struct. 42 2005 1831
-
(2005)
Int. J. Solid. Struct.
, vol.42
, pp. 1831
-
-
Ngan, A.H.W.1
Wang, H.T.2
Tang, B.3
Sze, K.Y.4
-
14
-
-
61549133922
-
Scratch and normal hardness characteristics of polyamide 6/nano-clay composite
-
S.K. Sinhaa, T. Songa, Xuefei W., and Y. Tongb Scratch and normal hardness characteristics of polyamide 6/nano-clay composite Wear 266 2009 814
-
(2009)
Wear
, vol.266
, pp. 814
-
-
Sinhaa, S.K.1
Songa, T.2
Xuefei, W.3
Tongb, Y.4
-
15
-
-
3042606295
-
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
-
W.C. Oliver, and G.M. Pharr Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology J. Mater. Res. 19 2004 3
-
(2004)
J. Mater. Res.
, vol.19
, pp. 3
-
-
Oliver, W.C.1
Pharr, G.M.2
-
16
-
-
0011713787
-
The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile
-
L.N. Sneddon The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile Int. J. Eng. Sci. 3 1965 47
-
(1965)
Int. J. Eng. Sci.
, vol.3
, pp. 47
-
-
Sneddon, L.N.1
-
17
-
-
0033388538
-
Measurement of non-linear microcrack accumulation rates in polymethylmethacrylate bone cement under cyclic loading
-
B.P. Murphy, and P.J. Prendergast Measurement of non-linear microcrack accumulation rates in polymethylmethacrylate bone cement under cyclic loading J. Mater. Sci. 10 1999 779
-
(1999)
J. Mater. Sci.
, vol.10
, pp. 779
-
-
Murphy, B.P.1
Prendergast, P.J.2
-
20
-
-
0031013653
-
Influence of temperature and vacuum mixing on bone cement properties
-
S. Smeds, D. Goertzen, and I. Ivarsson Influence of temperature and vacuum mixing on bone cement properties Clin. Orthop. Relat. Res. 334 1997 326
-
(1997)
Clin. Orthop. Relat. Res.
, vol.334
, pp. 326
-
-
Smeds, S.1
Goertzen, D.2
Ivarsson, I.3
-
22
-
-
0030549334
-
Analytical models of scratch hardness
-
J.A. Williams Analytical models of scratch hardness Tribol. Int. 29 1996 675
-
(1996)
Tribol. Int.
, vol.29
, pp. 675
-
-
Williams, J.A.1
-
23
-
-
0242334678
-
Scratch Resistance and Localised Damage Characteristics of Polymer Surfaces - A Review
-
B.J. Briscoe, and S.K. Sinha Scratch resistance and localised damage characteristics of polymer surfaces - a review Mater. Wiss. Werkst 34 2003 989 1002 (Pubitemid 37334373)
-
(2003)
Materialwissenschaft und Werkstofftechnik
, vol.34
, Issue.10-11
, pp. 989-1002
-
-
Briscoe, B.J.1
Sinha, S.K.2
-
27
-
-
4544352825
-
Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements
-
Y.W. Bao, W. Wang, and Y.C. Zhou Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements Acta Materialia 52 2004 5397
-
(2004)
Acta Materialia
, vol.52
, pp. 5397
-
-
Bao, Y.W.1
Wang, W.2
Zhou, Y.C.3
|