Low formaldehyde emission MDF overlaid with wood veneer: Bonding problems assessment

International Wood Products Journal

Volumn 3, Issue 1, 2012, Pages 31-35

  Martins, J ^a,b   Coelho, C ^a,b   Ferra, J ^c   Cruz, P ^c   Carvalho, L ^a,b  

^a POLYTECHNIC INSTITUTE OF VISEU   (Portugal)

^b UNIVERSITY OF PORTO   (Portugal)

^c Plataforma Industrial de Sines   (Portugal)

Author keywords

MDF

Indexed keywords

EVALUATION SYSTEM; FORMALDEHYDE EMISSION; MDF; MEDIUM-DENSITY FIBREBOARD; OPERATING CONDITION; PRESSING TIME; PULL-OFF; STRENGTH DEVELOPMENT; SURFACE AREA; SURFACE LAYERS; TENSILE LOADS; TEST STRIPS; WOOD BONDING; WOOD VENEER;

DEGRADATION; RATING; RESINS; UREA; VENEERS; WOOD;

QUALITY CONTROL;

DEGRADATION; QUALITY CONTROL; RATING; SOFTBOARDS; SYNTHETIC POLYMERS; UREA; VENEERS; WOOD;

EID: 84862097083     PISSN: 20426445     EISSN: 20426453     Source Type: Journal    
DOI: 10.1179/2042645312Y.0000000005     Document Type: Article

References (13)

1. Athanassiadou, E., and Ohlmeyer, M. 2009. Emissions of formaldehyde and VOC from wood-based Panels. In COST Action WG3 (E49) - performance in use and new products of wood based composites, (ed. M. Fan et al.), London: Brunel University Press, 219-240.
2. Costa, N., Ferra, J., Martins, J., Mendes, A., and Carvalho, L. 2011. Modeslos cinéticos para a aná lise da cura e resistência da ligação adesiva de resinas UF de baixa emissão de formaldeído'. In CLME'2011 6u Congresso Luso-Moçambicano de Engenharia, Maputo, Mozambique, August-September 2011.
3. Dunky, M. 2004. Adhesives based on formaldehyde condensation resins. Macromol. Symp. 217: 417-430.
4. EN311, Wood-based panels - Surface soundness - Test method.
5. EN314-1 Plywood - Bonding quality - Part 1: Test methods.
6. Ferra, J., Ohlmeyer, M., Mendes, A., Costa, M. R., Magalhã es, F., and Carvalho, L. H. 2011. Evaluation of urea-formaldehyde adhesives performance by recently developed mechanical tests. Int. J. Adhes. Adhes. 31(3): 127-134.
7. Forest Products Laboratory 2010. Wood handbook - Wood as an engineering material: General Technical Report FPL-GTR-190. Madison, WI: US Department of Agriculture, Forest Service, Forest Products Laboratory: Centennial edition.
8. Heinemann, C., Fruhwald, A., and Humphrey, P. E. 2003. Evaluation of adhesive cure during hot pressing of wood-based composites. Proc. Int. Symp. on 'Wood based materials: wood composites and chemistry', Lignovisionen issue 4, Vienna, Austria, 2003, BOKU-Universität für Bodenkultur.
9. Humphrey, P. 2009. Outline standard for adhesion dynamics evaluation employing the ABES (Automated Bonding Evaluation System) Technique. Proc. 2009 Int. Conf. on 'Wood adhesives proceedings', USDA Forest Service, Forest Products Laboratory and Forest Products Society, Lake Tahoe, NV, USA, September 2009, 213-223.
10. Jost, M., and Sernek, M. 2009. Shear strength development of the phenol-formaldehyde adhesive bond during cure. Wood Sci. Technol. 43: 153-166.
11. Kim, S. 2010. The reduction of formaldehyde and VOCs emission from Woodbased flooring by green adhesive using cashew nut shell liquid (CNSL). J. Hazard. Mater. 182: 919-922.
12. Suomi-Lindberg, L., Pulkkinen, P., and Nussbaum, R. 2001. Influence of the adhesive on the bonding process and the properties of wooden products. In COST Action E13: wood adhesion and glued products, State of the Art Report, (ed. Manfred Dunky). Pages 123-145.
13. Yang, I., Ahn, S., Choi, I., Kim, H., and Oh, S. 2009. Adhesives formulated with chemically modified okara and phenol-resorcinol- formaldehyde for bonding fancy veneer onto high-density fibreboard. J. Ind. Eng. Chem. 15: 398-402.