Measurements over a film-cooled, contoured endwall with various coolant injection rates

Proceedings of the ASME Turbo Expo

Volumn 3, Issue , 2001, Pages

  Oke, Rohit ^a   Simon, Terry ^a   Shih, Tom ^b   Zhu, Bin ^b   Lin, Yu Liang ^b   Chyu, Minking ^c  

^a UNIVERSITY OF MINNESOTA   (United States)

^b Michigan State University   (United States)

^c University of Pittsburgh   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING; MOMENTUM; SECONDARY FLOW;

COOLANT INJECTION; DIMENSIONLESS TEMPERATURES; FLOW TEMPERATURE; HIGH PRESSURE TURBINE; HOT-WIRE MEASUREMENTS; PRESSURE SURFACE; THERMAL MEASUREMENTS; THREE-COMPONENT;

COOLANTS;

EID: 84861654202     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/2001-GT-0140     Document Type: Conference Paper

References (33)

1. Friedrichs, S., Hodson, H.P., and Dawes, W.N., 1995, "Distribution of Film-Cooling Effectiveness on a Turbine Endwall Measured using the Ammonia and Diazo Technique," ASME Paper 95-GT-1.
2. Eckerle, W.A., and Langston, L.S., 1987, "Horseshoe Vortex Formation Around a Cylinder," J. of Turbomachinery, Vol. 109, pp. 278-285.
3. Langston, L.S., 1980, "Crossflow in a Turbine Cascade Passage," J. of Engineering for Power, Vol. 102, 4, pp. 866-874.
4. Kawai, T., Shinoki, S., and Adachi, T., 1990, "Visualization Study of Three-Dimensional Flows in a Turbine Cascade Endwall Region," JSME Intl. Journal, Series II . Fluids Engineering, Heat Transfer, Power, Combustion, Thermophysical Properties, Vol. 33, No. 2, pp. 256-264.
5. Goldstein, R.J., and Spores, R.A., 1988, "Turbulent Transport on the Endwall in the Region Between Adjacent Turbine Blades, " ASME J. of Heat Transfer, Vol. 110, pp. 862-869.
6. Gaugler, R.E., and Russell, L.M., 1980, "Streakline Flow Visualization Study of a Horseshoe Vortex in a Large Scale, Two-Dimensional Turbine Stator Cascade," ASME Paper 80-GT-4.
7. Sieverding, C.H., and Van Den Bosche, P., 1983, "The Use of Coloured Smoke to Visualize Secondary Flows in a Turbine Blade Cascade," J. Fluid Mech., Vol. 134, pp. 85-89.
8. Chung, J.T., 1992, "Flow and Heat Transfer Experiments in the Turbine Airfoil/Endwall Region," Ph.D. Thesis, Department of Mechanical Engineering, University of Minnesota.
9. Moore, J., and Moore, J.G., 1985, "Performance Evaluation of Linear Turbine Cascades Using Three-Dimensional Viscous Flow Calculations," J. of Engineering for Gas Turbines and Power, Vol. 107, PP. 969-975.
10. Hodson, H.P., and Dominy, R.G., 1987, "The Off-Design Performance of a Low-Pressure Turbine Cascade," J. of Turbomachinery, Vol. 109, pp. 201-209.
11. Kawai, T., Shinoki, S., and Adachi, T., 1989, "Secondary Flow Control and Loss Reduction in a Turbine Cascade Using Endwall Fences," JSME Intl. Journal, Series II-Fluids Engineering, Heat Transfer, Power, Combustion, Thermophysical Properties, Vol. 32, No. 3, pp. 375-387.
12. Chung, J.T., and Simon, T.W., 1991, "Three-Dimensional Flow near the Blade/Endwall Junction of a Gas Turbine: Application of a Boundary Layer Fence," ASME 91-GT-45.
13. McGinley, C.B., 1987, "Note on Vortex Control in Simulated Sail-Hull Interaction," J. of Ship Research, Vol. 31, No. 2, pp. 136-138.
14. Burd, S.W., 1998, "Secondary Flow and Heat Transfer Control in Gas Turbine Inlet Nozzle Guide Vane," Ph.D. Thesis, University of Minnesota.
15. Deich, M.E., Zaryakin, A.E., Fillipov, G.A., and Zatsepin, M.F., 1960, "Method of Increasing the Efficiency of Turbine Stages and Short Blades," Teploenergetika, No. 2 February. Translation No. 2816, Associated Electrical Industries (Manchester) Ltd., April 1960.
16. Ewes, J.S., Huber, F.W., Mitchell, J.P., 1973, "Investigation of the Aerodynamic Performance of Small Axial Turbines," ASME Paper No. 73-GT-3.
17. Morris, A.W.H., and Hoare, R.G., 1975, "Secondary Loss Measurements in a Cascade of Turbine Blades with Meridional Wall Profiling," ASME paper 75-WA/GT-13.
18. Kopper, F.C., Milano, R., and Vanco, M., 1981, "Experimental Investigation of Endwall Profiling in a Turbine Vane Cascade," AIAA Journal, Vol. 19, No. 8, pp. 1033-1040.
19. Yan, J., Gregory-Smith, D.G., and Qalker, P.J., 1999, "Secondary Flow Reduction in a Nozzle Vane Cascade by Non-Axisymmetric Endwall Profiling," ASME Paper 99-GT-339.
20. Hartland, J.C., Gregory-Smith, D.G., and Rose, M.G., 1998, "Non-Axisymmetric Endwall Profiling in a Turbine Rotor Blade," ASME Paper 98-GT-525.
21. Burd, S.W., and Simon, T.W., 2000a, "Flow Measurements in a Nozzle Guide Vane Passage with a Low Aspect Ratio and Endwall Contouring," ASME Paper 00-GT-0213.
22. Burd, S.W., and Simon, T.W., 2000b, "Effects of Bleed Injection on Nozzle Guide Vane Performance: Part I Flow Field Measurements," ASME Paper 00-GT-0199.
23. Burd, S.W., Satterness, C.J., and Simon, T.W., 2000c, "Effects of Bleed Injection on Nozzle Guide Vane Performance: Part II Thermal Measurements," ASME Paper 00-GT-0200.
24. Biesinger, T.E., and Gregory-Smith, D.G., 1993, "Reduction in Secondary Flows and Losses in a Turbine Cascade by Upstream Boundary Layer Blowing," ASME Paper 93-GT-114.
25. Lapworth, B.L., Forest, A.E., and Liu, S., 1999, "Aerodynamic Investigation of Endwall Film Cooling in an Axial Turbine Cascade: Part II Numerical Investigation," ISABE 99-7193.
26. Roy, R.P., Squires, K.D., Gerendas, M., and Song, S., 2000, "Flow and Heat Transfer at the Hub Endwall of Inlet Vane Passages "Experiments and Simulations," ASME Paper No. 00-GT-198.
27. Ames, F.E., 1994, "Experimental Study of Vane Heat transfer and Aerodynamics at Elevated Level of Turbulence," NASA, CR-4633.
28. Wang, L. 1996, "A Study on Gas Turbine Flows, Turbulence Generation, and Film Cooling Flow Measurements, " M.S. Thesis, Department of Mechanical Engineering, University of Minnesota.
29. Shih, T.I-P., Lin, Y.L., Simon, T.W., 2000, "Control of Secondary Flows in a Turbine Nozzle Guide Vane by Endwall Contouring," ASME Paper No. 2000-GT-0556
30. Laufer, J., 1953, "The Structure of Turbulence in Fully-Developed Pipe Flows," NACA Report 1174.
31. Kline, S.J., and McClintock, F.A., 1953, "Describing Uncertainties in Single Sample Experiments," Mech. Eng., Jan, pp. 3-8.
32. Chung, J.T., and Simon, T.W., 1990, "Three-Dimensional Flow Neat the Blade/Endwall Junction of a Gas Turbine: Visualization in a Large-Scale Cascade Simulator," ASME Paper No. 90-WA/HT-4.
33. Chung, J.T., and Simon, T.W., 1993, "Effectiveness of the Gas Turbine Endwall Fences in Secondary Flow Control at Elevated Freestream Turbulence Levels," ASME Paper No. 93-GT-51.