Flow and heat transfer at the hub endwall of inlet vane passages - Experiments and simulations

Proceedings of the ASME Turbo Expo

Volumn 3, Issue , 2000, Pages

  Roy, R P ^a   Squires, K D ^a   Gerendas, M ^a   Song, S ^a   Howe, W J ^b   Ansari, A ^b  

^a Arizona State University   (United States)

^b Allied Signal Engines   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; HEAT FLUX; LIQUID CRYSTALS; WIND TUNNELS;

FLOW AND HEAT TRANSFER; HEAT TRANSFER DISTRIBUTIONS; LOW-SPEED WIND TUNNEL; MOMENTUM EQUATION; SECONDARY AIR INJECTION; THERMAL ENERGY EQUATION; TRANSIENT LIQUID CRYSTAL TECHNIQUE; TURBULENT HEAT FLUXES;

HEAT TRANSFER;

EID: 84955153906     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/2000-GT-0198     Document Type: Conference Paper

References (28)

1. Biesinger, T.E. and Gregory-Smith, D.G., 1993, "Reduction in Secondary Flows and Losses in a Turbine Cascade by Upstream Boundary Layer Blowing," ASME Paper 93-GT- 114.
2. Blair, M.F., 1974, "An Experimental Study of Heat Transfer and Film Cooling on Large-Seale Turbine Endwalls,'" ASME Journal of Heat Transfer, Vol. 96, pp. 524-529.
3. Cleak, J.G.E. and Gregory-Smith, D.G., 1992, "Turbulence Modeling for Secondary Flow Prediction in a Turbine Cascade," ASME Journal of Turbomachinery, Vol. 114, pp, 590-598.
4. Fluent Inc., 1999, "Computational Fluid Dynamics Software FLUENT/UNS," Release 5.1, Lebanon, NH.
5. Friedrichs, S., Hodson, H.P. and Dawes, W.N., 1996, "Distribution of Film-Cooling Effectiveness on a Turbine Endwall Measured Using the Ammonia and Diazo Technique," ASME Journal of Turbomachinery, Vol. 118, pp. 613-621.
6. Friedrichs, S., Hodson, H.P. and Dawes, W.N., 1997, "Aerodynamic Aspects of Endwall Film-Cooling," ASME Journal of Turbomachinery, Vol. 119, pp. 786-793.
7. Gaugler, R.E. and Russell, L.M., 1984, "Comparison of Visualized Turbine Endwall Secondary Flow and Measured Heat Transfer Patterns," ASME Journal of Engineering for Gas Turbine and Power, Vol. 106, pp. 168-172.
8. Gregory-Smith, D.G. and Cleak, J.G.E., 1992, "Secondary Flow Measurements in a Turbine Cascade with High Inlet Turbulence," ASME Journal of Turbomachinery, Vol. 114, pp. 173-183.
9. Goldstein, RJ. and Spores, R.A., 1988, "Turbulent Transport on the Endwall in the Region Between Adjacent Turbine Blades," ASME Journal of Heat Transfer, Vol. 160, pp. 862-869.
10. Harvey, N.W. and Jones, T.V., 1990, "Measurement and Calculation of End Wall Heat Transfer and Aerodynamics on a Nozzle Guide Vane in Annular Cascade," ASME Paper No. 90-GT-301.
11. Hylton, L.P., Mihelc, M.S., Turner, E.R., and York, R.E., 1981, "Experimental Investigation of Turbine Endwall Heat Transfer," AFWAL-TR-8 1-2077, Vols. 1-3.
12. Kang, M. B., Kohli, A., Thole, K. A., 1998, "Heat Transfer and Flow Field Measurement in the Leading Edge Region Of A Stator Vane Eadwalr', ASME Paper 98-GT-173.
13. Kang, M. B. and Thole, K. A., 1999, "Flowfield Measurement in the Endwall Region of a Stator Vane", ASME paper 99-GT-188.
14. Kanniche, M., Boudjemadi, R., Dejan, F., and Archambeau, F., 1997, "3D Reynolds Stress Modeling of Turbulent Flow in Linear Turbine Cascade," ASME Paper No. 97-GT-92.
15. Kim, Y.W. and Metzger, D.E., 1995, "Heat Transfer Effectiveness on Film-Cooled Turbine Blade Tip Models," ASME Journal of Turbomachinery, Vol. 117, pp. 12-21.
16. Langston, L.S., 1980, "Crossflows in a Turbine Cascade Passage," ASME Journal of Engineering for Power, Vol. 102(4), pp. 866-874.
17. Langston, L.S., Nice, M.L., and Hooper, R.M., 1977, "Three-Dimensional Flow Within a Turbine Cascade Passage," ASME Journal of Engineering for Power, Vol. 99, pp. 21-28.
18. Luo, J. and Lakshminarayana, B., 1997, "Three-Dimensional Navier-Stokes Computation of Turbine Nozzle Flow with Advanced Turbulence Models," Journal of Turbomachinery, Vol. 119(2), pp. 516-530.
19. Marshal, P. and Sieverding, C.H., 1977, "Secondary Flows within Turbomaehinery Bladings," AGARD-214, Paris, France, Paper 11.
20. Metzger, D.E. and Larson, D.E., 1986, "The Fusion Point Surface Coatings for Local Convection Heat Transfer Measurements in Rectangular Channel Flows with 90-Degree Turns," ASME Journal of Heat Transfer, Vol. 108, pp.48-54.
21. Pirzadeh, S., 1996, "Three-Dimensional Unstructured Viscous Grids by the Advancing Layers Method," AIAA Journal, Vol. 34(1), pp. 43-49.
22. Sharma, O.P. and Buffer, T.L., 1987, "Prediction of Endwall Losses and Secondary Flows in Axial Flow Turbine Cascades," ASME Journal of Turbomachinery, Vol. 109, pp. 229-236.
23. Sieverding, C.H., 1985, "Recent Progress in the Understanding of Basic Aspects of Secondary Flows in Turbine Blade Passages," ASME Journal of Engineering for Gas Turbines andPower, Vol. 107(2), pp. 248-257.
24. Spalart, P.R. and Allmaras, S.R., 1994, "A One-Equation Turbulence Model for Aerodynamic Flows," La Recherche Aerospatiale, No. 1, pp. 5-21.
25. Spencer, M.C., Jones, T.V., and Lock, G.D., 1995, "Endwall Heat Transfer Measurements in an Annular Cascade of Nozzle Guide Vanes at Engine Representative Reynolds and Mach Numbers," International Journal of Heat and Fluid Flow, Vol. 17, pp. 139-147.
26. Strang, W.Z., Tomato, R.F. and Grismer, M.J., 1999, "The Defining Methods of Cobalt60: A Parallel, Implicit, Unstructured Euler/Navier-Stokes Flow Solver," AIAA Paper 99-0786.
27. Tomaro, R.F., Strang, W.Z. and Sankar, L.N., 1997, "An Implicit Algorithm for Solving Time Dependent Flows on Unstructured Grids," AIAA Paper 97-0333.
28. van Leer, B., 1979, "Towards the Ultimate Conservative Difference Scheme. V. A Second-Order Sequel to Godunovf s Method, " Journal of Computational Physics, Vol. 32, pp. 101-136.