Flow measurements in a nozzle guide vane passage with a low aspect ratio and endwall contouring

Proceedings of the ASME Turbo Expo

Volumn 3, Issue , 2000, Pages

  Burd, Steven W ^a   Simon, Terrence W ^a  

^a UNIVERSITY OF MINNESOTA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRFOILS; ANEMOMETERS; FLOW FIELDS; FLOW MEASUREMENT; HEAT TRANSFER; NOZZLES;

COMMERCIAL OPERATION; EXPERIMENTAL CONDITIONS; FLOW FIELD MEASUREMENT; HIGH ASPECT RATIO; HOT WIRE ANEMOMETRY; LOW ASPECT RATIO; NOZZLE GUIDE VANES; UNIVERSITY OF MINNESOTA;

ASPECT RATIO;

EID: 84955070256     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/2000-GT-0213     Document Type: Conference Paper

References (37)

1. Ames, F. E., 1994, "Experimental Study of Vane Heat Transfer and Aerodynamics at Elevated Levels of Turbulence," NASA CR-4633.
2. Ames, F. E., 1997, "Aspects of Vane Film Cooling with High Turbulence: Part I - Heat Transfer," ASME Paper 97-GT-239.
3. Arts, T., 1985, "Effects of Tip Endwall Contouring on the Three Dimensional Flow Field in an Annular Turbine Nozzle Guide Vane, Part 2 - Numerical Investigation," ASME Paper 85-GT-108.
4. Atkins, M. J., 1987, "Secondary Losses and End-wall Profiling in a Turbine Cascade," I. Mech. E. Turbo Conference 1987 C255/87.
5. Boletis, E., 1985, "Effects of Tip Endwall Contouring on the Three-Dimensional Flow Field in an Annular Turbine Nozzle Guide Vane: Part 1 - Experimental Investigation," J. Engineering Gas Turbines and Power, Vol. 107, pp. 983-990.
6. Boletis, E. and Sieverding, C. H., 1991, "Experimental Study of the Three-Dimensional Flow Field in a Turbine Stator Preceded by a Full Stage," J. Turbomachinery, Vol. 113, pp. 1-9.
7. Boyle, R. J. and Haas, J. E., 1982, "Comparison of Experimental and Analytical Performance for Contoured Endwall Stators," AIAA Paper 82-1286.
8. Boyle, R. J., Rholik, H. E., and Goldman, L. J., 1981, "Analytic Investigation of End-Wall Contouring on Stator Performance," NASA TP-1943.
9. Burd, S. W. and Simon, T. W., 2000, "Effects of Slot Bleed Injection Over a Contoured Endwall on Nozzle Guide Vane Performance: Part I- Flow Field Measurements," ASME Paper 2000-GT-199.
10. Burd, S. W., Satterness, C. J., and Simon, T. W., 2000, "Effects of Slot Bleed Injection Over a Contoured Endwall on Nozzle Guide Vane Performance: Part II - Thermal Measurements," ASME Paper 2000-GT-200.
11. Chung, J. T., and Simon, T. W., 1990. "Three-Dimensional Flow near the Blade/Endwall Junction of a Gas Turbine: Visualization in a Large-Scale Cascade Simulator," ASME Paper 90-WA/HT-4.
12. Chung, J. T., and Simon, T. W., 1991. "Three-Dimensional Flow near the Blade/Endwall Junction of a Gas Turbine: Application of a Boundary Layer Fence," ASME Paper 91-GT-45.
13. Chung, J. T., 1992, Flow and Heat Transfer Experiments in the Turbine Airfoil/Endwall Region, Ph.D. Thesis, Department of Mechanical Engineering, University of Minnesota.
14. Dean, R. C., 1953, Aerodynamic Measurements, Gas Turbine Laboratory, Massachusetts Institute of Technology, Cambridge, MA, U.S.A.
15. Deich, M. E., Zaryankin, A. E., Fillipov, G. A., and Zatsepin, M. F., 1960, "Method of Increasing the Efficiency of Turbine Stages and Short Blades," Teploenergetika, No. 2, February. Translation No. 2816, Associated Electrical Industries (Manchester) Ltd., April 1960.
16. Denton, J. D., 1993, "Loss Mechanisms in Turbomachines," ASME Paper 93-GT-435.
17. Duden, A., Raab, I., and Fottner, L., 1998, "Controlling the Secondary Flow in a Turbine Cascade by 3D Airfoil Design and Endwall Contouring," ASME Paper 98-GT-72.
18. Duden, A. and Fottner, L., 1999, "The Secondary Flow Field of a Turbine Cascade with 3D Airfoil Design and Endwall Contouring at Off-Design Incidence," ASME Paper 99-GT-211.
19. Ewen, J. S., Huber, F. W., and Mitchell, J. P., 1973, "Investigation of the Aerodynamic Performance of Small Axial Turbines," ASME Paper 73-GT-3.
20. Hanna, J. A., 1982, "Design and Analysis of a Boundary Layer Velocity Probe," Plan B Paper, Department of Mechanical Engineering, University of Minnesota.
21. Hartland, J. C., Gregory-Smith, D. G., Harvey, W. M., and Rose, M. G., 1999, "Non-Axisymmetric Turbine End Wall Design: Part II - Experimental Validation," ASME Paper 99-GT-338.
22. Harvey, N. W., Rose, M. G., Taylor, M. D., Shahpar, S., Hartland, J. C., and Gregory-Smith, D. G., 1999, "Non-Axisymmetric Turbine Endwall Design: Part I - Three-Dimensional Linear Design System," ASME Paper 99-GT-337.
23. Kline, S. J. and McClintock, F. A., 1953, "Describing Uncertainties in Single-sample Experiments," Mechanical Eng., January, pp. 3-8.
24. Kopper, F. C., Milano, R., and Vanco, M., 1980, "An Experimental Investigation of Endwalls Profiling in a Turbine Vane Cascade," AIAA Paper 80-1089.
25. Langston, L. S., 1980, "Crossflow in a Turbine Cascade Passage," J. Engineering for Power, Vol. 102, 4, pp. 866-874.
26. Laufer, J., 1953, The Structure of Turbulence in Fully-Developed Pipe Flow, NACA Report 1174.
27. Morris, A. W. H. and Hoare, R. G., 1975, "Secondary Loss Measurements in a Cascade of Turbine Blades with Meridional Wall Profiling," ASME Paper 75-WA/GT-13.
28. Moss, R. W., 1992, "The Effects of the Turbulence Length Scale on Heat Transfer," Department of Engineering Science, University of Oxford, Report OUEL 1924, Ph.D. Dissertation.
29. Moustapha, S. H. and Williamson, R. G., 1985, "Effect of Two Endwall Contours on the Performance of an Annular Nozzle Cascade," AIAA Journal, Vol. 24, No. 9, pp. 1524-1530.
30. Prumper, H., 1972, Application of Boundary Layer Fences in Turbomachinery, AGARDograph No. 164, Paper II-3, pp. 311-331.
31. Rose, M. G., 1994, "Non-Axisymmetric Endwall Profiling in the HP NGV's of an Axial Flow Gas Turbine," ASME Paper 94-GT-249.
32. Sieverding, C. H., 1985, "Recent Progress in Understanding of Basic Aspects of Secondary Flows in Turbine Blade Passages," J. Engineering for Gas Turbines and Power, Vol. 107, pp. 248-257.
33. Timko, L. P., 1982, Energy Efficient Engine: High Pressure Turbine Component Test Performance Report, NASA CR-168289.
34. Tipton, D. L., 1981, "Experimental Investigation of Turbine Endwall Contouring," Detroit Diesel Allison Report AX0400 174, General Motors Corp., AVRADCOM Tech. Report 81-D-19.
35. Wang, L., 1996, A Study of Gas Turbine Flows, Turbulence Generation, and Film Cooling Flow Measurement, M.S. Thesis, Department of Mechanical Engineering, University of Minnesota.
36. Warner, R. E. and Tran, M. H., 1987, "Recent Developments to Improve High-Pressure and Intermediate-Pressure Turbine Efficiency," I. Mech. E. Turbo Conference 1987 C275/87.
37. Yan, J., Gregory-Smith, D. G., and Walker, P. J., 1999, "Secondary Flow Reduction in a Nozzle Guide Vane Cascade by Nonaxisymmetric End-wall Profiling," ASME Paper 99-GT-339.