Analysis of EMI terminal modeling of switched power converters

IEEE Transactions on Power Electronics

Volumn 27, Issue 9, 2012, Pages 3924-3933

  Bishnoi, Hemant ^a   Baisden, Andrew Carson ^a,b   Mattavelli, Paolo ^a   Boroyevich, Dushan ^a  

^a Virginia Polytechnic Institute and State University   (United States)

^b JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY   (United States)

Author keywords

Buck converter; conducted emissions; EMI terminal modeling; Norton equivalents; voltage source inverter (VSI)

Indexed keywords

AC APPLICATIONS; BUCK CONVERTERS; CONDUCTED ELECTROMAGNETIC INTERFERENCE; CONDUCTED EMISSIONS; DC-DC BOOST CONVERTERS; ELECTRO MAGNETIC POLLUTION; MODELING APPROACH; MODELING TECHNIQUE; NORTON EQUIVALENTS; SWITCHED POWER CONVERTERS; THREE-PHASE VOLTAGE SOURCE INVERTERS; VOLTAGE SOURCE INVERTER;

AEROSPACE APPLICATIONS; ELECTROMAGNETIC PULSE;

DC-DC CONVERTERS;

EID: 84861442827     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2012.2190100     Document Type: Article

References (38)

1. Y. Maillet, L. Rixin, W. Shuo, F. Wang, R. Burgos, and D. Boroyevich, "High-density EMI Filter design for DC-fed motor drives," in Proc. 24th Annu. IEEE Appl. Power Electron. Conf. Expo., 2009, pp. 1998-2005.
2. S. D. Round, P. Karutz, M. L. Heldwein, and J. W. Kolar, "Towards a 30 kW/liter, three-phase unity power factor rectifier," in Proc. Power Convers. Conf., 2007, pp. 1251-1259. (Pubitemid 47468668)
3. Z. Huibin, L. Jih-Sheng, A. R. Hefner, Jr., T. Yuqing, and C. Chingchi, "Analysis of conducted EMI emissions from PWM inverter based on empirical models and comparative experiments," in Proc. IEEE Power Electron. Spec. Conf., 1999, vol. 2, pp. 861-867.
4. M. Moreau, N. Idir, and P. Le Moigne, "Modeling of conducted EMI in adjustable speed drives," IEEE Trans. Electromagn. Compat., vol. 51, no. 3, pp. 665-672, Aug. 2009.
5. L. Ran, S. Gokani, J. Clare, K. J. Bradley, and C. Christopoulos, "Conducted electromagnetic emissions in induction motor drive systems-I. Time domain analysis and identification of dominantmodes," IEEE Trans. Power Electron., vol. 13, no. 4, pp. 757-767, Jul. 1998. (Pubitemid 128747798)
6. P.Xuejun, Z. Kai, K.Yong, and C. Jian, "Analytical estimation of common mode conducted EMI in PWM inverter," in Proc. Conf. Rec. IEEE IAS Annu. Meeting, 2004, vol. 4, pp. 2651-2656.
7. F. Giezendanner, J. Biela, J. W. Kolar, and S. Zudrell-Koch, "EMI noise prediction for electronic ballasts," IEEE Trans. Power Electron., vol. 25, no. 8, pp. 2133-2141, Aug. 2010.
8. B. Revol, J. Roudet, J. L. Schanen, and P. Loizelet, "EMI study of threephase inverter-fed motor drives," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 223-231, Jan./Feb. 2011.
9. Y. Koyama, M. Tanaka, and H. Akagi, "Modeling and analysis for simulation of common-mode noises produced by an inverter-driven air conditioner," IEEE Trans. Ind. Appl., vol. 47, no. 5, pp. 2166-2174, Sep./Oct. 2011.
10. L. M. Schneider, "Noise source equivalent circuit model of off-line converters and use in input filter design," in Proc. IEEE EMC Symp., 1983, pp. 167-175.
11. L. Ran, J. C. Clare, K. J. Bradley, and C. Christopoulos, "Measurement of conducted electromagnetic emissions in PWM motor drive systems without the need for an LISN," IEEE Trans. Electromagn. Compat., vol. 41, no. 1, pp. 50-55, Feb. 1999.
12. J. Meng, W. Ma, and L. Zhang, "Determination of noise source and impedance for conducted EMI prediction of power converters by lumped circuit models," in Proc. IEEE Power Electron. Spec. Conf., 2004, vol. 4, pp. 3028-3033.
13. H. Rebholz and S. Tenbohlen, "Prospects and limits of common-and differential-mode separation for the filter development process," in Proc. EMC Europe Int. Symp., 2008, pp. 1-6.
14. Z. Dongbing, C. Dan, and D. Sable, "Non-intrinsic differential mode noise caused by ground current in an off-line power supply," in Proc. IEEE Power Electron. Spec. Conf., 1998, vol. 2, pp. 1131-1133.
15. J. Meng andW.Ma, "A newtechnique formodeling and analysis ofmixedmode conducted EMI noise," IEEE Trans. Power Electron., vol. 19, no. 6, pp. 1679-1687, Nov. 2004.
16. A. Perez, A. M. Sanchez, J. R. Regue,M. Ribo, P. Rodriguez-Cepeda, and F. J. Pajares, "Characterization of power-line filters and electronic equipment for prediction of conducted emissions," IEEE Trans. Electromagn. Compat., vol. 50, no. 3, pp. 577-585, Aug. 2008.
17. H. M. Rebholz, S. Tenbohlen, and W. Kohler, "Time-domain characterization of RF sources for the design of noise suppression filters," IEEE Trans. Electromagn. Compat., vol. 51, no. 4, pp. 945-952, Nov. 2009.
18. M. Jin, M.Weiming, P. Qijun, Z. Zhihua, and Z. Lei, "Noise source lumped circuit modeling and identification for power converters," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1853-1861, Dec. 2006.
19. L. Qian,W. Fei, andD.Boroyevich, "Modular-terminal-behavioral (MTB) model for characterizing switching module conducted EMI generation in converter systems," IEEE Trans. Power Electron., vol. 21, no. 6, pp. 1804-1814, Nov. 2006. (Pubitemid 44824227)
20. L. Qian, F.Wang, and D. Boroyevich, "Conducted-EMI prediction for AC converter systems using an equivalent modularterminal behavioral (MTB) source model," IEEE Trans. Ind. Appl., vol. 43, no. 5, pp. 1360-1370, Sep./Oct. 2007. (Pubitemid 47570236)
21. M. Hosoya, "The simplest equivalent circuit of a multi-terminal network," Bulletin College Sci.-Univ. Ryukyus, pp. 1-10, 2000.
22. A. C. Baisden, D. Boroyevich, andW. Fei, "Generalized terminalmodeling of electromagnetic interference," IEEE Trans. Ind. Appl., vol. 46, no. 5, pp. 2068-2079, Sep./Oct. 2010.
23. A. C. Baisden, D. Boroyevich, and F. Wang, "EMI Terminal Modeling," in Conf. Rec. IEEE IAS Annu. Meeting, 2008, pp. 1-8.
24. M. Foissac, J. L. Schanen, and C. Vollaire, "'Black box' EMC model for power electronics converter," in Proc. IEEE Energy Convers. Congr. Expo., 2009, pp. 3609-3615.
25. H. Bishnoi, A. C. Baisden, P. Mattavelli, and D. Boroyevich, "EMImodeling of buck converter using a generalized terminal model," in Proc. Conf. Grand Challenges Modeling Simulation, 2010, pp. 158-164.
26. H. Bishnoi, A. C. Baisden, P. Mattavelli, and D. Boroyevich, "EMI modeling of half-bridge inverter using a generalized terminal model," in Proc. IEEE Appl. Power Electron. Conf. Expo., Mar. 2011, pp. 468-474.
27. X. Lei, F. Feng, and S. Jian, "Behavioral modeling methods for motor drive system EMI design optimization," in Proc. IEEE Energy Convers. Congr. Expo., 2010, pp. 947-954.
28. Q. Tao, J. Graham, and S. Jian, "Characterization of IGBT modules for system EMI simulation," in IEEE Appl. Power Electron. Conf. Expo., Feb. 2010, pp. 2220-2225.
29. C. Jettanasen, F. Costa, and C. Vollaire, "Common-mode emissions measurements and simulation in variable-speed drive systems," IEEE Trans. Power Electron., vol. 24, no. 11, pp. 2456-2464, Nov. 2009.
30. D. Labrousse, B. Revol, and F. Costa, "Common-mode modeling of the association of N-switching cells: Application to an electric-vehicle-drive system," IEEE Trans. Power Electron., vol. 25, no. 11, pp. 2852-2859, Nov. 2010.
31. Z. Dongbing, D.Y. Chen,M. J.Nave, andD. Sable, "Measurement of noise source impedance of off-line converters," IEEE Trans. Power Electron., vol. 15, no. 5, pp. 820-825, Sep. 2000.
32. K. Kiatgamjorn, P. Boonma, and W. Khan-ngern, "The study of input impedance of switched mode power supply," in Proc. Int. Conf. Electr. Eng./Electron. Comput. Telecommun. Inf. Technol., 2008, pp. 1049-1052.
33. S. Kye Yak and D. Junhong, "Measurement of noise source impedance of SMPS using a two probes approach," IEEE Trans. Power Electron., vol. 19, no. 3, pp. 862-868, May 2004.
34. V. Tarateeraseth, H. Bo, S. Kye Yak, and F. G. Canavero, "Accurate extraction of noise source impedance of an SMPS under operating conditions," IEEE Trans. Power Electron., vol. 25, no. 1, pp. 111-117, Jan. 2010.
35. W. Yan, Y. Zhao, X.-Q. Lu, Y.-h. Dong, and W. Feng, "A modified EMI noise source impedance modeling by employing two resistances calibration and Levenberg-Marquardt's method," in Proc. Int. Conf. Microw. Millimeter Wave Technol., 2010, pp. 2021-2024.
36. B. Zhao,M. Zhao, Z. Feng, L. Shui, and M.Yao, "An improved dual-probe approach to measure noise source impedance," in Proc. Asia-Pacific Symp. Electromagn. Compat., 2010, pp. 214-217.
37. V. Tarateeraseth, S. Kye Yak, F. G. Canavero, and R. W. Chang, "Systematic electromagnetic interference filter design based on information from in-circuit impedance measurements," IEEE Trans. Electromagn. Compat., vol. 52, no. 3, pp. 588-598, Aug. 2010.
38. A. C. Baisden, "Generalized terminal modeling of electro-magnetic interference," Ph.D. dissertation, Dept. Elect. Eng., Virginia Tech, Blacksburg, 2010.